hit counter script
Sony STR-DB1070 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo Receiver
  5. STR-DB1070 - Fm Stereo/fm-am Receiver
  6. Operating instructions manual

Sony STR-DB1070 Operating Instructions Manual

Hide thumbs Also See for STR-DB1070:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Operating Instructions Manual
FM Stereo
FM-AM Receiver

Operating Instructions

Owner's Record
The model and serial numbers are located on the rear panel. Record the serial number
in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No.
STR-DB1070
STR-DB870
© 2001 Sony Corporation
4-235-985-91(1)
Serial No.

Advertisement

Table of Contents
loading

Related Manuals for Sony STR-DB1070

Summary of Contents for Sony STR-DB1070

  • Page 1: Operating Instructions

    Operating Instructions Owner’s Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No.
  • Page 2 NERGY is a U.S. registered WARNING mark. ® As an NERGY partner, Sony To prevent fire or shock hazard, do not Corporation has determined that this expose the unit to rain or moisture. ® product meets the NERGY guidelines for energy efficiency.

  • Page 3: Table Of Contents

    Table of Contents Parts Identification Other Operations Naming preset stations and program Main unit ..........5 sources ........... 43 Recording ..........43 Hooking Up the Components Using the Sleep Timer ......44 Required cords ........6 Adjustments using Antenna hookups ........7 the SET UP button .......
  • Page 4 The 2ND ROOM button and the ON SCREEN number by looking at the lower right corner of the front panel. In this manual, the STR-DB1070 (area button on the remote are not available. code U) is used for illustration purposes unless stated otherwise.

  • Page 5: Main Unit

    2CH qg (30) ENTER wh (43) NAME ed (43) EQ e; (36) NIGHT MODE ql (31) 2ND ROOM (STR-DB1070 only) eg (27) EQUALIZER ef (36) ON SCREEN (STR-DB1070 6.1CH DECODING 0 (31) only) rd (10) FM/AM 6 (38, 39) 6.1CH DECODING indicator 7...

  • Page 6: Hooking Up The Components

    Hooking Up the Components Required cords Before you get started • Turn off the power to all components before making any connections. • Do not connect the AC power cord until all of the connections are completed. • Be sure to make connections firmly to avoid hum and noise. •...

  • Page 7: Antenna Hookups

    Antenna hookups AM loop antenna (supplied) FM wire antenna* (supplied) DIGITAL ANTENNA CTRL S CTRL S CTRL S CTRL S STATUS IN DVD/LD OPTICAL S-VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO TV/SAT VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO OPTICAL MD/DAT OPTICAL CONTROL AUDIO AUDIO...

  • Page 8: Audio Component Hookups

    Audio component hookups STR-DB1070 MD or DAT deck INPUT OUTPUT LINE LINE Turntable DIGITAL ANTENNA CTRL S CTRL S CTRL S CTRL S STATUS IN DVD/LD OPTICAL S-VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO TV/SAT VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO...
  • Page 9 STR-DB870 MD or Tape deck INPUT OUTPUT LINE LINE Turntable DIGITAL ANTENNA CTRL S CTRL S CTRL S CTRL S STATUS IN DVD/LD OPTICAL S-VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO TV/SAT VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO OPTICAL MD/TAPE OPTICAL CONTROL AUDIO AUDIO...

  • Page 10: Video Component Hookups

    TV monitor** game * Models of area code U, CA only. ** For STR-DB1070, you can display the SET UP, SURR, LEVEL, and EQ parameters and selected sound field by pressing ON SCREEN. Note on video component When using the S-video jacks instead of the video...

  • Page 11: Digital Component Hookups

    (two front speakers, two surround speakers, and a center speaker) and a sub woofer are required. For 6.1 channel surround sound (STR-DB1070 only), you will also need a surround back speaker. You can also connect an LD player with an RF OUT jack via an RF demodulator, like the Sony MOD-RF1 (not supplied).
  • Page 12 Digital component hookups (continued) Connect the digital output jacks of your MD or DAT deck to the receiver’s digital input jack and connect the digital input jacks of your MD or DAT deck to the receiver’s digital output jack. These connections allow you to make digital recordings of TV broadcasts, etc.

  • Page 13: Multi Channel Input Hookups

    For 6.1 channel surround sound (STR-DB1070 only), you will also need a surround back speaker. Refer to the operating instructions supplied with your DVD player, multi channel decoder, etc., for details on the multi channel hookups.

  • Page 14: Other Hookups

    WOOFER 2ND ROOM OUT** Models of area code U, CA only. ** STR-DB1070 only. • If you have a Sony CD changer with a CONTROL A1 hookup COMMAND MODE selector If your CD changer’s COMMAND MODE • If you have a CONTROL A1...

  • Page 15: Setting The Voltage Selector

    Note If you have a S-LINK CONTROL S- Refer to the operating instructions supplied with your compatible Sony TV, satellite tuner, monitor, TV for details regarding the operations you can DVD player or VCR, use an audio/video/ control from your TV.
  • Page 16 Other hookups (continued) Caution Make sure that the total power consumption of the component(s) connected to the receiver’s AC OUTLET(s) does not exceed the wattage stated on the Connecting the AC power rear panel. Do not connect high-wattage electrical cord home appliances such as electric irons, fans, or TVs to this outlet.

  • Page 17: Hooking Up And Setting Up The Speaker System

    * For STR-DB870, you can connect a surround back speaker. ** STR-DB1070 only. For STR-DB1070, you can use the connected center and surround back speakers as surround back right and left speakers. (See page 21.) Make sure to connect correctly as indicated on the rear panel.

  • Page 18: Performing Initial Setup Operations

    To check the audio output during settings (to set up while outputting the sound), check the connection 2ND ROOM hookup (see page 24). (STR-DB1070 area code U, CA only) You can use the center and surround back Clearing the receiver’s speakers as right and left speakers in the 2nd memory room (See page 27).

  • Page 19: Multi Channel Surround Setup

    The setting is entered automatically. left and right speakers (STR-DB1070). Repeat steps 2 and 3 until you have set all of the parameters that follow. When placing surround speakers to your side...
  • Page 20 DISTANCE UNIT METER** ROOM” (unless previously set to “NO”) SURR POSI. SIDE (STR-DB1070 area code U, CA only). SURR HEIGHT x Surround speaker size (SURROUND) SURR BACK HGT. • If you connect large speakers that will FRONT SP > XXX Hz...
  • Page 21 • If you connect a sub woofer, select “YES”. “2ND ROOM” (unless preciously set to “NO”) • If you do not connect a sub woofer, select (STR-DB1070 area code U, CA only). “NO”. This activates the bass redirection circuitry and outputs the LFE signals from other speakers.
  • Page 22 Multi channel surround setup The receiver allows you to input the speaker position (continued) in terms of distance. However, it is not possible to set the center speaker further than the front speakers. x Surround speaker distance Also, the center speaker cannot be set more than (SURROUND) 1.5 meters closer than the front speakers.
  • Page 23 x Surround speaker position (SURR POSI.)* The surround/surround back speaker position parameter is designed specifically for implementation This parameter lets you specify the location of of the Digital Cinema Sound modes in the your surround speakers for proper “VIRTUAL” sound fields. implementation of the Digital Cinema Sound With the Digital Cinema Sound modes, speaker surround modes in the “VIRTUAL”...

  • Page 24: Checking The Connections

    Multi channel surround setup Adjust the LEVEL parameters so that the level of the test tone from each (continued) speaker sounds the same when you are x Surround back speaker crossover in your main listening position. frequency (SURR BACK SP >) Press LEVEL to adjust the balance and Lets you adjust the surround back speaker bass level of speakers.

  • Page 25: Basic Operations

    DVD/LD The audio input you can assign differs TV or satellite tuner TV/SAT depending on the function. Tape deck TAPE (STR-DB1070) DVD/LD MD or Tape deck MD/TAPE (STR-DB870) NO ASSIGN t DIGITAL: ONLY COAX t MD or DAT deck MD/DAT (STR-DB1070...

  • Page 26: Input Mode

    Press MULTI/2CH A. DIRECT to enjoy the INPUT MODE audio source connected to the MULTI CH IN (for STR-DB1070, MULTI CH IN 1 or 2) jacks or Press INPUT MODE to select the input mode analog 2 channel input jacks. Only volume for your digital components.

  • Page 27: Listening To The Sound In Another Room

    (Models of area code U, CA only) Set 2nd room speaker parameter in the SET UP menu (see page 46). (STR-DB1070 only) Use the remote to adjust the volume in the 2nd room. Set the mode of the supplied remote to the 3rd room mode.

  • Page 28: Enjoying Surround Sound

    Sony. DCS uses the DSP (Digital Signal parameters. Processor) technology to reproduce the sound To fully enjoy surround sound, you must...
  • Page 29 30° angle • SEMI CINEMA STUDIO EX A reproduces the of elevation. sound characteristics of Sony Pictures Entertainment’s classic editing studio. x VIRTUAL ENHANCED A (Virtual • SEMI CINEMA STUDIO EX B reproduces the...
  • Page 30 2 channel. 2CH ANALOG DIRECT. When set to MULTI DIRECT (for STR-DB1070, MULTI 1 or 2 x HEADPHONE (DIRECT) DIRECT), you can adjust balance and level of Outputs the analog signals without digital all the speakers.
  • Page 31 6.1CH DECODING NIGHT MODE Press 6.1CH DECODING to adjust the Allows you to retain a theater like environment, 6.1 channel matrix parameter in the SET UP at low volume levels even late at night. Even at menu (page 45). a low volume level, you can clearly hear the dialogues and adjust the volume in small steps.

  • Page 32: Understanding The Multi Channel Surround Displays

    3 MULTI CH IN (1/2): Lights up when MULTI indication will fluctuate (and may turn off) CH IN (for STR-DB1070, MULTI CH IN 1 during playback. or 2) is selected.

  • Page 33: Customizing Sound Fields

    0 Tuner indicators: Lights up when using the Customizing sound fields receiver to tune in radio stations, etc. See pages 38–42 for tuner operations. By adjusting the surround parameters and the qa SLEEP: Lights up when sleep timer is equalization of the front, center, surround, and activated.
  • Page 34 Customizing sound fields (continued) Front reverberation (FRONT REVERB) This parameter can be used when “DIGITAL Initial settings CONCERT HALL A, B” is selected. This Parameter Initial setting parameter lets you adjust the amount of reverberations to add to the front signals PRO LOGIC AUTO according to the original reverberations in the...

  • Page 35: Adjusting The Level Parameters

    (page 19–21). LFE MIX XXX dB 0 dB D. RANGE COMP. continued * STR-DB1070 only. Front balance (FRONT) Lets you adjust the balance between front left and right speakers. Surround balance (SURROUND) Lets you adjust the balance between surround left and right speakers.

  • Page 36: Adjusting The Equalizer

    Customizing sound fields (continued) To turn on/off the equalizer Press EQUALIZER. The EQ indicator in the display lights up when the equalizer is turned Dynamic range compressor (D. on. When you adjust the equalizer using the EQ RANGE COMP.) parameters, the settings are stored separately Lets you compress the dynamic range of the for each sound field and can be reproduced sound track.
  • Page 37 Surround speaker bass adjustment (Gain/Frequency) Lets you adjust the gain and frequency of bass. Surround speaker treble adjustment (Gain/Frequency) Lets you adjust the gain and frequency of treble. Surround back speaker bass adjustment (Gain/Frequency) Lets you adjust the gain and frequency of bass. Surround back speaker treble adjustment (Gain/Frequency) Lets you adjust the gain and frequency of...

  • Page 38: Receiving Broadcasts

    Receiving Broadcasts Notes Before receiving broadcasts, make sure you • Do not press any button on the receiver or supplied remote during autobetical operation. have connected FM and AM antennas to the • If you move to another area, repeat this procedure receiver (see page 7).

  • Page 39: Automatic Tuning

    If you’ve tuned in an AM station, adjust Automatic tuning the direction of the AM loop antenna for optimum reception. If you don’t know the frequency of the station Repeat steps 2 to 5 to receive another you want, you can let the receiver scan all station.

  • Page 40: Tuning To Preset Stations

    Preset tuning (continued) Tuning to preset stations You can tune the preset stations by either of the Presetting radio stations following two ways. Scanning the preset stations Rotate FUNCTION to select TUNER. Rotate FUNCTION to select TUNER. The last received station is tuned in. The last received station is tuned in.

  • Page 41: Using The Radio Data System (Rds)

    Notes Using the Radio Data • If there is an emergency announcement by government authorities, “Alarm-Alarm!” flashes in System (RDS) the display. • If a station does not provide a particular RDS service, “No XX” (such as “No Clock Time”) (Models of area code CEL only) appears in the display.
  • Page 42 Using the Radio Data System (RDS) Program type Description (continued) indication Leisure & Hobby Programs on recreational activities Description of program types such as gardening, fishing, cooking, etc. Program type Description Jazz Music Jazz programs indication Country Music Country music programs News News programs National Music...

  • Page 43: Other Operations

    Other Operations Press ENTER. Naming preset stations Repeat steps 2 to 4 to assign index name for another station or program and program sources source. Note You can enter a name of up to 8 characters for (Models of area code CEL only) preset stations and program sources.

  • Page 44: Using The Sleep Timer

    TAPE OUT or that source will be recorded onto the audio track of MD/DAT OUT jacks (STR-DB1070) or the analog the video tape instead of the audio from the original MD/TAPE OUT jacks (STR-DB870). To record a medium.

  • Page 45: Adjustments Using The Set Up Button

    OSD V.POSITION 1) Only when the center or surround back speaker is set to “2ND ROOM” (STR-DB1070 of area code U, CA only). 2) Depends on the model. 3) STR-DB1070 of area code other than U, CA only. 4) STR-DB1070 only.
  • Page 46 “AUTO OFF” setting when remote. Change the command mode when you digital circuits are turned on, etc. use 2 Sony receivers in the same room. Note x Monitor color system (COLOR We recommend to set to “ALWAYS ON” when digitally recording to MD or DAT.

  • Page 47: Control A1 Control System

    The CONTROL A1 control system has been updated to the CONTROL A1 which is the standard system in the Sony 300 disc CD changer and other recent Sony components. Components Getting Started with CONTROL A1 jacks are compatible with components with CONTROL A1 , and can be connected to each other.

  • Page 48: Basic Functions

    When using a commercially available cord, use the pause mode, and recording begins a monaural (2P) mini-plug cord less than shortly thereafter. 2 meters long, with no resistance (like the Sony When playback ends from the source RK-G69HG). component, recording stops.

  • Page 49: Additional Information

    For customers in Europe To avoid electrical shock, do not open the If you have any question or problem concerning your cabinet. Refer servicing to qualified receiver, please consult your nearest Sony dealer. personnel only. On safety Troubleshooting Should any solid object or liquid fall into the cabinet,...
  • Page 50 Troubleshooting (continued) There is intermittent sound from a digital source. • Check to see if signals with 96 kHz sampling frequencies are input to the DVD/LD OPTICAL There is no sound from one of the front IN or COAXIAL jacks. speakers.
  • Page 51 • Make sure you set the tuning interval correctly component connected to the analog MD/DAT or (when tuning in AM stations with direct tuning). TAPE terminals (STR-DB1070) or the analog • No stations have been preset or the preset MD/TAPE terminals (STR-DB870).

  • Page 52: Specifications

    Reference Power Output Troubleshooting (continued) (8 ohms 1 kHz, THD 0.7 %) STR-DB1070: FRONT : 100 W + 100 W CENTER : 100 W Reference sections for clearing the SURR : 100 W + 100 W receiver’s memory SURR BACK...
  • Page 53 Frequency response FM tuner section PHONO RIAA equalization curve Tuning range 87.5 - 108.0 MHz ±0.5 dB Antenna terminals 75 ohms, unbalanced CD/SACD, TAPE, 10 Hz – 100 kHz MD/DAT, MD/TAPE, ±3 dB (with sound field, Sensitivity TV/SAT, DVD/LD, equalizer, and bass boost Mono: 18.3 dBf, 2.2 µV/75 ohms VIDEO 1, 2, 3...
  • Page 54 • Models of area code U, CA Video section Audio/video/control S connecting cord (1) Control S connecting cord (1) Inputs • STR-DB1070 only Video: 1 Vp-p, 75 ohms • Models of area code U, CA S-video: Y: 1 Vp-p, 75 ohms Remote commander RM-PP505L (1) C: 0.286 Vp-p, 75 ohms...

  • Page 55: Tables Of Settings Using Surr, Level, Eq, And Set Up Buttons

    –10 dB to +10 dB (1 dB steps) S. WOOFER LEVEL XXX dB –10 dB to +10 dB (1 dB steps) LFE MIX XXX dB OFF, –20 dB to 0 dB (1 dB steps) D.RANGE COMP. OFF, 0.1 to 0.9 (0.1 steps), STD, MAX STR-DB1070 only. continued...
  • Page 56 Tables of settings using SURR, LEVEL, EQ, and SET UP buttons (continued) Press Press Turn jog dial Page FRONT BASS GAIN –10 dB to +10 dB (1 dB steps) FRONT BASS FREQUENCY 99 Hz to 1.0 kHz (21 steps) FRONT MID GAIN –10 dB to +10 dB (1 dB steps) FRONT MID FREQUENCY 198 Hz to 10 kHz (37 steps)
  • Page 57 0 to 64 (1 steps) OSD V.POSITION 0 to 32 (1 steps) 1) STR-DB1070 only. 2) When the speakers are set to SMALL only. 3) STR-DB1070 area code U, CA only. 4) STR-DB1070 area code other than U, CA only.

  • Page 58: Adjustable Parameters For Each Sound Field

    Adjustable parameters for each sound field The adjusted SURR and EQ parameters are stored in each sound field. The adjusted LEVEL parameters are applied to all the sound fields. < SURR > EFFECT WALL REVERB FRONT SCREEN VIRTUAL LOGIC LEVEL TYPE TIME REVERB...
  • Page 59 < LEVEL > FRONT SUR BACK CENTER SUR SUR BACK SUB WOOFER LFE D.RANGE LEVEL LEVEL LEVEL LEVEL COMP A.F.D. NORMAL SURROUND CINEMA STUDIO EX A CINEMA STUDIO EX B CINEMA STUDIO EX C SEMI CINEMA STUDIO EX A SEMI CINEMA STUDIO EX B SEMI CINEMA STUDIO EX C NIGHT THEATER MONO MOVIE...
  • Page 60 Adjustable parameters for each sound field (continued) < > < FRONT > BASS BASS TREBLE TREBLE GAIN FREQ GAIN FREQ GAIN FREQ A.F.D. NORMAL SURROUND CINEMA STUDIO EX A CINEMA STUDIO EX B CINEMA STUDIO EX C SEMI CINEMA STUDIO EX A SEMI CINEMA STUDIO EX B SEMI CINEMA STUDIO EX C NIGHT THEATER...
  • Page 61 < > < CENTER > BASS BASS TREBLE TREBLE GAIN FREQ GAIN FREQ GAIN FREQ A.F.D. NORMAL SURROUND CINEMA STUDIO EX A CINEMA STUDIO EX B CINEMA STUDIO EX C SEMI CINEMA STUDIO EX A SEMI CINEMA STUDIO EX B SEMI CINEMA STUDIO EX C NIGHT THEATER MONO MOVIE...
  • Page 62 VIRTUAL ENHANCED A VIRTUAL ENHANCED B DIGITAL CONCERT HALL A DIGITAL CONCERT HALL B CHURCH OPERA HOUSE JAZZ CLUB DISCO/CLUB LIVE HOUSE ARENA STADIUM GAME HEADPHONE (2CH) HEADPHONE (DIRECT) HEADPHONE THEATER MULTI CH IN (1/2) 2CH ANALOG DIRECT PCM96K * STR-DB1070 only.

  • Page 63: Remote Button Description

    Remote button description For STR-DB870 area code CEL You can use the remote RM-U305 to operate the components in your system. The tables below show the settings of each button. Remote Operations Function Remote Operations Function Button Button SLEEP Receiver Activates the sleep Receiver Use with “SHIFT”...
  • Page 64 WIDE Selects the wide picture DVD player/ mode. VCD player/ LD player/ ** Only for Sony TVs with the picture-in-picture DAT deck function. CD player/ Pauses play or record. Notes MD deck/Tape (Also starts recording • Some functions explained in this section may not...
  • Page 65 Remote Operations Function Button Selects output signal TV/VTR from the aerial terminal: TV signal or VCR program. TV/VIDEO TV/VCR Selects input signal: TV input or video input. A. F. D. Receiver Auto Format Decoding. 2CH/OFF Receiver Turns off sound field or selects 2CH mode.

  • Page 66: Changing The Factory Setting Of A Function Button

    ENTER >10 ENTER – /– – D.TUNING POSITION SWAP * Sony VCRs are operated with a VTR 1, 2 or 3 D.SKIP/ – SUB CH + CH/PRESET setting. These correspond to Beta, 8mm and VHS respectively. DISPLAY P IN P...
  • Page 68 Sony Corporation Printed in Japan...

This manual is also suitable for:

Str-db870

Table of Contents