Related Manuals for Philips bSure 1
Summary of Contents for Philips bSure 1
-
Page 1: User Guide
XP cClear10 English (good) 24-07-2003 15:52 Pagina 1 Philips multimedia projector cClear User guide English... -
Page 2: Table Of Contents
XP cClear10 English (good) 24-07-2003 15:52 Pagina 2 1. Introduction 2. Functional overview 3. Set up 4. Installation Philips Multimedia Projector Index Packaging contents 4 Optional accessories 5 Service accessories 5 6-11 Controls Remote control Connections 12-14 Positioning the projector and screen 12... - Page 3 XP cClear10 English (good) 24-07-2003 15:52 Pagina 3 5. Operation 6. Maintenance 7.Troubleshooting Philips Multimedia Projector Index 24-40 Preparation 24 General 24 Messages 24-25 Direct key feedback 24 Feedback messages 25 Error messages 25 Warning messages 25 Some examples 18...
-
Page 4: Introduction
We are sure that, used properly, it will bring you years of enjoyment.You will want to keep this manual handy, as it is a convenient source of information about your projector. For your own protection and prolonged operation of your projector, please read the enclosed Safety Sheet. -
Page 5: Optional Accessories
Optional accessories Service accessories Philips Multimedia Projector 1. Introduction The following accessories are available via the dealer from whom you purchased your Philips projector: • LCA 3123/00 - 200 W replacement lamp - • LCA 2211/00 - Ceiling mount - 8670 922 11009 •... -
Page 6: Functional Overview
When the menu is active the Cursor Control controls the menu cursor to navigate through the OSD menu.The cursor control works with up/down and left/right button operation. The Cursor Control can only function as a mouse cursor when projector and computer are connected via the USB or PS/2 connectors. - Page 7 XP cClear10 English (good) 24-07-2003 15:52 Pagina 7 Focus ring @ Zoomring # Philips Multimedia Projector 2. Functional overview Source Menu Source Menu Mute Mute Lamp Lamp Stand Stand Temp Temp 7 8 9 Adjusts the focus of the projected image.
- Page 8 Power indicator $ Lights up green when wireless operation is activated. Ready indicator % Lights up green when the projector operates in a wireless network. WLAN indicator ^ Lights up green when wireless connection has been made. (Wireless Local Area Network) Reset &...
- Page 9 2. Functional overview Controls < ^ & Height/Level adjuster # To adjust the vertical angle of the projector. Dust filter $ Mains inlet socket % To connect the projector to the mains. Lock slit ^ To insert an optional locking device (Kensington lock).
-
Page 10: Remote Control
When the menu is active the Cursor Control controls the menu cursor to navigate through the OSD menu.The cursor control works with up/down and left/right button operation. The Cursor Control can only function as a mouse cursor when projector and computer are connected via the USB or PS/2 connectors. -
Page 11: Connections
Audio information from the computer will be heard via the projector speaker. When the bSure2 Brilliance projector is connected to the computer via the USB socket, In-/Output socket to connect a PC or Apple Macintosh computer equipped with a PS/2 connection. -
Page 12: Positioning The Projector And Screen
SCREEN Rear projection • Place the projector on a stable, level surface, out of direct sunlight and away from sources of excessive dust, dirt, heat, water, moisture, vibration and strong magnetic fields. • Allow sufficient cooling of the product by keeping all air inlets and outlets clear from obstructions. -
Page 13: Adjusting The Focus And Size Of The Image
3. Set up To switch off the mains supply completely, disconnect the mains lead. – Save energy! Please put the projector in the Power/Standby position if you are not going to use the projector for more than 15 minutes. –... -
Page 14: Moving/Transporting The Projector
– The Standby indicator starts blinking orange. Wait until the cooling fan has stopped (about 3 minutes after the projector has been put in Standby) and disconnect the mains lead and all other cables. Put the lens cap back in place to prevent dust, dirt or other contamination from harming or damaging the front of the projector lens when moving the projector. -
Page 15: Installation
(analog) and DVI (digital). RS-232 connection When RS-232 connection is used the projector can be operated via a RS-232 control system and the projector status can be checked on the control system screen. See the RS-232 protocol file (ProjectorMax) on the Cd-rom on how to include projector commands in an external control system. -
Page 16: External Monitor Connection
(cClear Wireless version only) The ‘PresenterMax’ application, supplied on the CD-ROM, allows wireless transmission of screen images and graphic files from your computer (PC only) to the projector. For installation and operation see the ‘PresenterMax’ user guide on the CD-ROM. -
Page 17: Connecting To A Computer
USB/USB Audio (upstream) socket port of the computer. For this, use the VGA/USB cable supplied (1b). Connect the PS/2 (out) socket of the projector to the PS/2 (in) socket of the computer. For this, use an optional PS/2 cable (2). –... - Page 18 Source Mode Mode Select Select Philips Multimedia Projector 4. Installation Connecting to an external monitor Connect the VGA Y connector marked ‘Projector’ (4a), Data 2 socket of your projector. Connect the VGA cable supplied (1a) between the computer and the VGA Y connector marked ‘Computer’...
-
Page 19: Digital Connection
Philips Multimedia Projector 4. Installation Audio Out Connect the DVI (out) socket of the computer to the Data 1 (DVI) socket of the projector and secure the plugs by tightening the thumb screws. For this, use the DVI cable supplied (4). -
Page 20: Connecting To Video Equipment
For this, use the audio/video connection cable (1b) supplied. Connect the S-Video (out) socket of a S-VHS video recorder, Laser Disc player, video camera or TV to the S-Video (in) socket of the projector. For this use the S-Video connection cable (2) supplied. - Page 21 XP cClear10 English (good) 24-07-2003 15:52 Pagina 21 Component/HDTV Philips Multimedia Projector 4. Installation Connecting to video equipment Pr/Cr,Y, Pb/Cb Connect the Component in sockets (Pr/Cr,Y, Pb/Cb) output sockets of your Component- or HDTV-video equipment For this, use the audio/video connection cable supplied (1).
-
Page 22: Connecting To Video Equipment
For this, use the audio/video connection cable supplied (2). Connect the Video input of the projector to the Y output of the adapter. For this, use an optional audio/video connection cable (3). Select ‘RGB sync’ or ‘RGB sog’ input by pressing the Source button. -
Page 23: Connecting To Audio Equipment
Mode Mode Select Select Window Window Philips Multimedia Projector 4. Installation Connecting to audio equipment L Audio R Connect the Audio in L/R sockets of an amplifier or stereo system to the Audio Out socket of the projector. For this use an optional audio/video connection cable (1). -
Page 24: Operation
Select Notes Messages Philips Multimedia Projector 5. Operation Press the Standby button on projector or remote control – The Standby indicator lights up orange. – When the projection lamp is on, the Standby indicator lights up green screen (when enabled) appears for several seconds. -
Page 25: Messages
XP cClear10 English (good) 24-07-2003 15:52 Pagina 25 Philips Multimedia Projector 5. Operation Feedback messages Feedback messages are displayed in the top right corner of the screen.They are displayed e.g. when: – a signal comes up or goes down; –... -
Page 26: On Screen Display Menu
All video and data adjustments and settings (except A/V Mute) are done via On Screen Displays and with help of Menu, OK and Cursor Control on the projector or the remote control. The projector is set to standard settings at the factory. However, you can adjust these settings to suit your own preferences. - Page 27 XP cClear10 English (good) 24-07-2003 15:52 Pagina 27 Philips Multimedia Projector 5. Operation COMPUTER MODE Main menu Sub menu Picture Brightness Contrast Mirror Picture Format Colour tracking Colour temperature Display Window mode PIP Location Window select Freeze Zoom Auto Image On Screen Display Menu >...
- Page 28 XP cClear10 English (good) 24-07-2003 15:52 Pagina 28 Menu tree Philips Multimedia Projector 5. Operation GENERAL ADJUSTMENTS/SETTINGS Main menu Sub menu Settings Language Keystone SmartDimmer Source System information Factory settings Key lock Start-up screen Lamp counter SmartSave (SV10 and XG1 Brilliance versions only)
-
Page 29: General Explanation
Mode Mode Select Select Window Window Philips Multimedia Projector 5. Operation Press Menu. – The menu bar appears on the screen. The first item is highlighted and its sub menu is shown. Depending on the selected source (Auto, RGB sync,YPbPr, RGB sog, S-Video,Video, Mutimedia, Wireless (only available on cClear wireless version), DVI-RGP, DVI-YPbPr.) some... -
Page 30: Computer Adjustments
– Contrast adjusts the overall contrast intensity; – Mirror mirrors the picture for use of the projector in various positions with respect to the user(s) and the projection screen; – Picture Format selects one of six picture format options (wide screen, super zoom 4:3, 4:3, movie expand 14:9, movie expand 16:9, 16:9 subtitles);... -
Page 31: Display Adjustments
– Saturation adjusts the colour saturation of the projected image; – Mirror mirrors the picture for use of the projector in various positions with respect to the user(s) and the projection screen; – Picture Format selects one of six picture format options (wide screen, super zoom 4:3, 4:3, movie expand 14:9, movie expand 16:9, 16:9 subtitles);... -
Page 32: Display Adjustments
Source Source Mode Mode Select Select Window Window Philips Multimedia Projector 5. Operation Display adjustments • Press Menu and select ‘Display’ in the menu bar.The following ‘Display’ adjustments can now be made, following the instructions under ‘General explanation’: – Window mode selects projection from one or two input sources. -
Page 33: Settings
OK button pressed for 10 seconds. – Start-up screen displays (Default) or suppresses (Off) the default Philips start-up screen upon the projector’s start up and to select (Custom) and store (Load) a start-up screen of your own choice. -
Page 34: Examples
Mode Mode Select Select Window Window Philips Multimedia Projector 5. Operation The following settings/adjustments follow a slightly different procedure or may need some further explanation. Digital Zoom/Magnification ‘Digital Zoom’ is used to enlarge a part of the picture. Press Menu. -
Page 35: Picture In Picture (Pip) / Double Window
XP cClear10 English (good) 24-07-2003 15:52 Pagina 35 Notes Philips Multimedia Projector 5. Operation Picture in picture (PIP) / Double window ‘PIP’ enables projection of a second picture in the currently projected picture. Double window enables projection of two pictures next to each other. -
Page 36: Pip / Double Window - Possible Combinations
XP cClear10 English (good) 24-07-2003 15:52 Pagina 36 PIP / Double window - Possible combinations Philips Multimedia Projector 5. Operation The following overview tells you which projection sources can (+) and cannot (–) be combined in PIP or Double window mode. - Page 37 XP cClear10 English (good) 24-07-2003 15:52 Pagina 37 Philips Multimedia Projector 5. Operation Data 2 Data 2 Pr/Cr Pr/Cr Pb/Cb B Pb/Cb B Audio Audio RS-232 RS-232 Current projection source Second source (in PIP window or second window) Y, Pb, Pr (1)
-
Page 38: Picture Format
‘Picture Format’ is used to select one of six picture format options (wide screen, super zoom 4:3, 4:3, movie expand 14:9, movie expand 16:9, 16:9 subtitles). computer signal input the last selected picture format (beforethe projector was switched off) will be selected again. -
Page 39: General Adjustments/Settings
– When the image is loaded ‘Capture complete’ and ‘Please reset projector’ appear on the screen. You will now have to reset the projector. For this see ‘Resetting the projector’ hereafter. On Screen Display Menu > ’ can be made, following the ‘Settings. -
Page 40: Restarting The Projector
When the projection lamp is on, the Standby indicator lights up green and your personal start-up screen appears. Your personal start-up screen will appear each time the projector is switched on exept when the SecurityMax™ application has been activated.The SecurityMax™ start-up screen will then appear. -
Page 41: Maintenance
Close the filter holder. Press tab A and insert the filter B into the projector. We advise you to clean the filter every 100 hours. Operating the projector without filter or with a torn or damaged filter may seriously damage the projector. -
Page 42: Lamp
6. Maintenance When operation time reaches the last 100 hours of the average lamplife, the message ‘Warning: lamplife has almost expired’ will be displayed on the screen, each time the projector is switched on.The lamp indicator lights up orange. The lamplife remaining can be checked using the OSD menu. -
Page 43: Resetting The Lamplife Time
– The Mains inlet socket will open again. 11 Insert the mains lead into both the projector Mains inlet socket and the wall socket. 12 Press the Standby button to switch on the projector. 13 Reset the lamp life time (see ‘Resetting the lamplife time’). -
Page 44: Troubleshooting
Philips Multimedia Projector 7.Troubleshooting If a fault occurs, first check the points listed below before taking the projector for repair. If you are unable to solve a problem by following these hints, consult your dealer or service organisation. Under no circumstances should you try to repair the projector yourself as this could invalidate the guarantee. - Page 45 In case of RGBS (Scart) connection – RGBS is not selected or Auto Source is activated (does not recognize RGBS). • Select RGBS as projection source with the Source button on the projector or the remote control. In case of external monitor connection –...
- Page 46 • The projector will go into Power Standby mode. Make sure the filter cover is closed properly; clean air inlets or dust filter and allow the projector to cool down; this may take up to 30 minutes. When the LED stops flashing press any button to activate the projector again.
-
Page 47: Troubleshooting
Unplug the USB cable or PS/2 cable and then reconnect. In case of PS/2 connection: – The PS/2 mouse of the connected laptop has priority over the projector mouse loop through connection. • Disable the PS/2 mouse of the laptop by selecting ‘Disable in hardware profile’ in the ‘Windows Mouse Properties’...