Related Manuals for Philips SA5223
Summary of Contents for Philips SA5223
- Page 1 SA5223 Wide dynamic range AGC transimpedance amplifier (150MHz) Product specification IC19 Data Handbook Philips Semiconductors INTEGRATED CIRCUITS 1995 Oct 24...
- Page 2 SONET. The part is also suited for many other RF and fiber optic applications as a general purpose gain block. The SA5223 is the first AGC amplifier to incorporate internal AGC loop hold capacitor, therefore, no external components are required.
-
Page 3: Dc Electrical Characteristics
3. PSRR is output referenced and is circuit board layout dependent at higher frequencies. For best performance use a RF filter in V 4. This implies that the SA5223 gain will change 1dB (10%) in the absence of data for 1ms (i.e., can handle bursty data without degrading Bit Error Rate (BER) for 100,000 cycles at 100MHz). -
Page 4: Test Circuits
Philips Semiconductors Wide dynamic range AGC transimpedance amplifier(150MHz) TEST CIRCUITS SINGLE-ENDED + 12.4 @ S 21 @ R IN , R IN + 1k NETWORK ANALYZER S-PARAMETER TEST SET PORT1 PORT2 = 50 0.1uF IN DUT R=1k Test Circuit 1: Bandwidth 0.1uF... -
Page 5: Die Sales Disclaimer
100% functionality through this process. There is no post waffle pack testing performed on individual die. Since Philips Semiconductors has no control of third party procedures in the handling or packaging of die, Philips Semiconductors assumes no liability for device functionality or performance of the die or systems on any die sales. - Page 6 Philips Semiconductors Product specification Wide dynamic range AGC transimpedance amplifier(150MHz) SA5223 SD00521 Figure 2. SONET Test Board — 155Mb/s (1300nm) 1995 Oct 24...
-
Page 7: Top View
Philips Semiconductors Wide dynamic range AGC transimpedance amplifier(150MHz) TOP VIEW Figure 3. SA5223 Board Layout (NOT ACTUAL SIZE) 1995 Oct 24 Dout BOTTOM VIEW Product specification SA5223 Dout SD00522... - Page 8 3.400 3.300 = 5.5V = 5.0V = 4.5V 3.200 3.100 3.000 2.900 SD00528 Figure 8. SA5223 Output Voltage vs DC Input Current 4.200 4.000 = INFINITY = 5.0V, Temperature = 25 C = 5.5V 3.800 3.600 3.400 3.200 = 5.0V 3.000...
- Page 9 = 5.0V, Temperature = 25 C – – 0.150 0.100 0.050 0.000 DC INPUT CURRENT ( A) Figure 10. SA5223 Differential Output vs DC I (for small input current) 1.800 1.600 = INFINITY 1.400 = 5.0V, Temperature = 25 C 1.200 –...
- Page 10 = 5.0V Temperature = 25 C = 0pF = 5.5V = 5.0V = 4.5V SD00540 Figure 19. SA5223 Input Current RMS Noise Spectral Density Product specification SA5223 SINGLE-ENDED OUTPUT TEMPERATURE = 25 C VCC = 5.0V STOP = 200MHz FREQUENCY (MHz, LINEAR)
- Page 11 Philips Semiconductors Product specification Wide dynamic range AGC transimpedance amplifier (150MHz) SA5223 SO8: plastic small outline package; 8 leads; body width 3.9mm SOT96-1 1995 Oct 24...
-
Page 12: Data Sheet Status
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.