Template Group X/Ballast X Parameter Window - ABB i-bus KNX Product Manual
Dali-gateway basic dg/s x.64.1.1
Hide thumbs
Also See for i-bus KNX:
- Product manual (264 pages) ,
- Product manual (132 pages) ,
- Product manual (220 pages)
Table of Contents
Advertisement
®
ABB i-bus
KNX
Commissioning
3.2.4
X template group x/ballast x parameter window
The group x/ballast x template parameter tab provides access to template parameter windows which can
relate to any group or ballast on the DALI output. Whether they relate to the parametrization of a group or
ballast in the template window or in an individual parameter window is selected when first parametrizing
the groups or ballasts.
The template windows have a major advantage in that the settings made here relate to all groups or
ballasts, so each group or ballast on the DALI output reacts in the same way.
Using the template windows also considerably reduces the amount of parametrization work involved and
provides a clearer overview. As a parameter change in the template window affects every group or ballast,
the programmer only needs to change one parameter rather than up to 16 group and 64 ballast
parameters. For example, if the maximum brightness value for the system needs to be limited to 90%,
making this setting in the template window applies it to all groups and ballasts.
The template parameter windows are illustrated and described below. They are the same as the individual
parameter windows except for the fact that they relate to all groups and ballasts while the individual
windows relate only to a particular group or specific ballast.
DG/S x.64.1.1 | 2CDC507164D0201 77
Advertisement
Table of Contents
