Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Huawei EchoLife HG550
Summary of Contents for Huawei EchoLife HG550
- Page 1 EchoLife HG550 Home Gateway User Manual...
- Page 2 Free Communication, Wonderful Life Thank you for purchasing EchoLife HG550 Home Gateway of Huawei. EchoLife HG550 Home Gateway User Manual Issue: Date: 2006-08-31...
- Page 3 Copyright © 2006 Huawei Technologies Co., Ltd. All Rights Reserved No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
- Page 4 Do not dismantle the equipment by yourself. In case of failure, send the equipment to an authorized maintainer. Without prior written consent from Huawei, no company or individual is allowed to decompile, disassemble, modify or reverse engineer the equipment and shall be solely responsible for any effect resulted from such action.
- Page 5 Do not trample on, stretch, or over bend the equipment cables, to avoid equipment failure. Do not use broken or worn wires. If a wire is broken or worn, contact your supplier for change. Huawei Technologies Proprietary...
- Page 6 Keep the power socket clean and dry, to avoid electric shock or other dangers. Note If the device is in use for a long time, temperature of the shell will go up. Please do not worry. This is normal and the device can work normally. Huawei Technologies Proprietary...
- Page 7 20 cm must be maintained between the antenna of this device and all persons. 2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter Huawei Technologies Proprietary...
-
Page 8: About This Manual
About This Manual This manual introduces the function, features and operation of EchoLife HG550. The main contents are as follows: To know Refer to Features, network application Chapter 1 Introduction and hardware structure Installation Chapter 2 Installation Chapter 3 Common... -
Page 9: Table Of Contents
3.2.1 System Information ..........10 3.2.2 Service Information ..........10 3.2.3 ADSL ................ 10 3.2.4 WAN ................. 11 3.2.5 LAN................16 3.2.6 DHCP ............... 17 3.2.7 WLAN ............... 19 3.2.8 Voice................. 20 3.2.9 DNS ................25 3.2.10 Port Redirect............26 Huawei Technologies Proprietary... - Page 10 3.4.3 Firmware Upgrade............ 41 3.4.4 Save & Reboot ............42 3.5 Status .................. 43 3.5.1 Diagnostics ............... 43 3.5.2 Statistics ..............43 Chapter 4 Technical Specifications ..........45 Chapter 5 Appendix................ 48 5.1 Acronyms and Abbreviations ..........48 Huawei Technologies Proprietary...
-
Page 11: Chapter 1 Introduction
Chapter 1 Introduction Thank you for purchasing EchoLife HG550 Home Gateway (hereinafter referred to as HG550). HG550 is an ADSL Access Point (AP) router for high-speed Internet access. This manual introduces how to install and configure HG550. 1.1 Functions The functions of HG550 are as follows:... -
Page 12: Appearance
HG550 provides both wired and wireless access. Figure 1-1 shows the network application of HG550. Carrier's OSS IPTV DSLAM Network Internet BRAS Figure 1-1 Network application of HG550 1.3 Appearance Figure 1-2 shows the appearance of HG550. Huawei Technologies Proprietary... -
Page 13: Front Panel
Figure 1-3 Front panel of HG550 Table 1-1 describes these indicators. Table 1-1 Description of indicators Indicator Status Description The power is on. POWER The power is off. WLAN The WLAN link is normal. The WLAN link is not established. Huawei Technologies Proprietary... -
Page 14: Rear Panel
Blinking There is a VoIP coming call. The VoIP phone is in use. PSTN The PSTN phone is in use. 1.3.2 Rear Panel Figure 1-4 shows the rear panel of HG550. Figure 1-4 Rear panel of HG550 Huawei Technologies Proprietary... - Page 15 LAN hub. RESET It is used to restore the default settings of HG550. ON/OFF It is used to switch on/off HG550. POWER It is used to connect with the power adapter. Huawei Technologies Proprietary...
-
Page 16: Chapter 2 Installation
II. Connect the network cable To connect HG550 to a LAN or computer, do as follows: Use a network cable to connect the hub port or the Ethernet interface of your computer with a LAN interface of HG550. Huawei Technologies Proprietary... -
Page 17: Simple Configuration
Configure the computer to obtain IP address automatically. Alternatively, configure your computer to be in the same network segment as HG550. The default IP address of HG550 is 192.168.1.1. 2.2.2 Logging In to the Configuration Interface The steps are as follows: Huawei Technologies Proprietary... - Page 18 Enter the IP address of HG550 (192.168.1.1 by default) in the address bar of IE browser. Enter the default user name admin and password admin in the pop-up window. Click OK. Note: If you have problems during the configuration, contact your ISP for help. Huawei Technologies Proprietary...
-
Page 19: Chapter 3 Common Configurations
After login, the home page of HG550 is displayed. See Figure 3-1. Figure 3-1 Home page of HG550 The left part is the navigation bar, providing links for you to access different pages. The right part is the information area, showing details of configuration and management. Huawei Technologies Proprietary... -
Page 20: Basic
I. Configuration This configuration is used to change the standard used on ADSL port, you can select from the ADSL Port drop-down menu in the page. II. Save Click Apply to save the settings in the RAM. Huawei Technologies Proprietary... -
Page 21: Wan
Peak Cell Rate Enter the maximum rate of transmitting cells. Sustainable Cell Enter the average rate of transmitting cells within a Rate certain time. Maximum Burst Enter the maximum number of cells while Size transmitting at the maximum rate. Huawei Technologies Proprietary... - Page 22 DHCP server. Use the following IP address: If you select it, you will need to specify an IP address for WAN interface. Enter the IP address of the WAN interface provided WAN IP Address by your ISP. Huawei Technologies Proprietary...
- Page 23 Click WAN of Basic in the navigation bar and click New on the right part to display the New page. Select a PVC you want to create from the drop-down menu. For the parameter explanation of the New page, see Table 3-1. Huawei Technologies Proprietary...
- Page 24 You can check the box to enable NAT or leave it Enable NAT unchanged to disable NAT. You can check the box to enable adding default Add Default Route route or leave it unchanged to disable it. Click Back to go back to the previous page. Huawei Technologies Proprietary...
- Page 25 Click Back to go back to the previous page. Click Cancel to quit configuration without saving the changes. Click Next to display the Confirm page. The Confirm page displays the information of the PVC you created. Click Back to go back to the previous page. Huawei Technologies Proprietary...
-
Page 26: Lan
Table 3-6 shows the parameter explanation of the LAN Settings page. Table 3-6 Parameters in the LAN Settings page Item Configuration IP Address Enter the IP address of Ethernet interface. Select an appropriate subnet mask from the Subnet Mask drop-down menu. Huawei Technologies Proprietary... -
Page 27: Dhcp
DHCP server. Display the currently released IP address and DHCP Release IP associated MAC address, lease time and host name. Display the reserved IP address that will not be DHCP Reserved IP released from address pool. Huawei Technologies Proprietary... - Page 28 II. None Select None in DHCP Configuration page to display the DHCP Configuration-None page. When you select None in DHCP configuration page, the DHCP service is disabled. III. Save Click Apply to save the settings in the RAM. Huawei Technologies Proprietary...
-
Page 29: Wlan
WEP keys on the right side. It is configurable only when the authentication type WPA-PSK is selected. You can select an encryption WPA-PSK type of WPA-PSK from the drop-down menu and specify a WPA-PSK key on the right side. Huawei Technologies Proprietary... -
Page 30: Voice
Save & Reboot page, select Save and click Apply to save new settings. 3.2.8 Voice Click Voice of Basic in the navigation bar to display the VoIP configuration page. I. System Settings Click System Settings in the VoIP configuration page to display the System Settings page. Huawei Technologies Proprietary... - Page 31 Select a protocol for the transportation of register Registar Transport message. Proxy Enter the IP address of SIP Proxy server. Proxy Port Enter the port number of proxy server. Outbound Server Enter the IP address of outbound server. Huawei Technologies Proprietary...
- Page 32 SIP Security Normal, Negotiate and SIPS from the drop-down menu. III. Dialing Plan Click Dialing Plan in the VoIP configuration page to display the Dialing Plan page. Table 3-12 shows the parameter explanation of the Dialing Plan page. Huawei Technologies Proprietary...
- Page 33 Click Cancel to quit configuration without saving the changes. IV. QoS Click QoS in the VoIP configuration page to display the Quality of Service Settings page. Table 3-14 shows the parameter explanation of the Quality of Service Settings page. Huawei Technologies Proprietary...
- Page 34 Enter the name that will be displayed. Available Codecs Enter the available codecs. Select True or False to enable or disable the Enabled endpoint. VI. Telephone Configuration Click Telephone Config in the VoIP configuration page to display the Telephone Config page. Huawei Technologies Proprietary...
-
Page 35: Dns
ISP provides primary and secondary DNS addresses. Normally the primary DNS is responsible for domain name service. When primary DNS server is shutdown or overloaded, the secondary DNS can provide the service. Table 3-17 shows the parameter explanation of the DNS page. Huawei Technologies Proprietary... -
Page 36: Port Redirect
You can define how to forwarding external packets based on application type, interface, protocol and port. I. Configuration Click New to display the Port Redirect-New page. Huawei Technologies Proprietary... - Page 37 II. Save Click Apply to save the settings in the RAM. To save this configuration changes permanently, enter the Save & Reboot page, select Save and click Apply to save new settings. Huawei Technologies Proprietary...
-
Page 38: Dmz Host
Forwarded to the which do not belong to any applications configured DMZ host in the Port Forwarding table, will be forwarded to the DMZ host. IP address of DMZ Enter the IP address of DMZ host. host Huawei Technologies Proprietary... -
Page 39: Routing Table
Destination, Netmask, Gateway, and WAN Interface. You can delete any entry in this page from Delete column. To create new routing entry, click Add to display the Routing Table-add page. Table 3-20 shows the parameter explanation of the Routing Table-add page. Huawei Technologies Proprietary... -
Page 40: Advanced
To save this configuration changes permanently, enter the Save & Reboot page, select Save and click Apply to save new settings. 3.3 Advanced 3.3.1 UPnP Click UPnP of Advanced in the navigation bar to display the UPnP page. Huawei Technologies Proprietary... -
Page 41: Rip
You can view the related information of RIP in this page including Interface, RIP Version, Operation Mode, and Enabled. To change RIP configuration on an interface, click the corresponding icon in the Edit column to display the RIP-edit page. Huawei Technologies Proprietary... -
Page 42: Firewall
Save & Reboot page, select Save and click Apply to save new settings. 3.3.3 Firewall Click Firewall of Advanced in the navigation bar to display the Firewall Configuration page. I. Configuration Table 3-22 shows the parameter explanation of the Firewall Configuration page. Huawei Technologies Proprietary... - Page 43 Destination Port Enter the range of destination port number. Direction Select Allow or Deny from the drop-down menu. II. Save Click Apply to save the settings in the RAM. Click Cancel to quit configuration without saving the changes. Huawei Technologies Proprietary...
-
Page 44: Sntp
Table 3-25 shows the parameter explanation of the SNTP Client page. Table 3-25 Parameters in the SNTP Client page Item Configuration Set SNTP Clock If you check the box, you will need to set SNTP manually clock manually. Huawei Technologies Proprietary... -
Page 45: Tr069
Save & Reboot page, select Save and click Apply to save new settings. 3.3.5 TR069 Click TR069 of Advanced in the navigation bar to display the TR069 Configuration page. I. CWM Parameters configuration Table 3-26 shows the parameter explanation of the CWM Parameters configuration page. Huawei Technologies Proprietary... - Page 46 Save & Reboot page, select Save and click Apply to save new settings. III. Management Server configuration Click Management Server configuration to display the Management Server configuration page. Table 3-27 shows the parameter explanation of the Management Server configuration page. Huawei Technologies Proprietary...
- Page 47 ACS discovery. Select Disabled to disable the function. IV. Save Click Apply to save the settings in the RAM. To save this configuration changes permanently, enter the Save & Reboot page, select Save and click Apply to save new settings. Huawei Technologies Proprietary...
-
Page 48: Igmp Proxy
Click Quality of Service of Advanced in the navigation bar to display QoS Configuration page. I. Configuration Click New to add new QoS configuration in the QoS Configuration-add page. Table 3-29 shows the parameter explanation of the QoS Configuration-add page. Huawei Technologies Proprietary... - Page 49 II. Save Click Apply to save the settings in the RAM. To save this configuration changes permanently, enter the Save & Reboot page, select Save and click Apply to save new settings. Huawei Technologies Proprietary...
-
Page 50: Tools
Save & Reboot page, select Save and click Apply to save new settings. Note: There can be only one user name in the system. You need to log in again with the new user name and new password (if they are changed). Huawei Technologies Proprietary... -
Page 51: Configuration File
After you restore the configuration file, system will reboot and return to the home page. 3.4.3 Firmware Upgrade Click Firmware Upgrade of Tools in the navigation bar to display the Firmware Upgrade page. To upgrade the firmware of the system, do as following steps: Huawei Technologies Proprietary... -
Page 52: Save & Reboot
Table 3-30 shows the parameter explanation of the Save & Reboot page. Table 3-30 Parameters in the Save & Reboot page Item Configuration Select it and then click Apply, system will save the Save current configuration permanently. Huawei Technologies Proprietary... -
Page 53: Status
Select a PVC and click Apply to run the diagnostic process. It takes only a few seconds. The results will appear in the Description column to show if the test passed or failed. 3.5.2 Statistics Click Statistics of Status in the navigation bar to display the Statistics page. Huawei Technologies Proprietary... - Page 54 This page displays the traffic statistics gathered on the LAN and WAN interface. To view the real-time information, click Refresh. To clear the counter, click Clear. Huawei Technologies Proprietary...
-
Page 55: Chapter 4 Technical Specifications
RJ-11, inner pair (pin 2, 3) Pass Forum TR-048/TR-067 Performance Performance Criteria Four Fast Ethernet RJ-45, 10/100 Mbit/s, MDI/MDIX ports Auto-sensing Standard Compliance IEEE 802.3, IEEE 802.3u RJ-11, FXS interface with Lifeline relay Two ports for POTS Huawei Technologies Proprietary... - Page 56 Numbers 13 channels for Japan IEEE 802.11b:1, 2, 5.5, and 11Mbit/s Wireless Data Rate IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbit/s Reset to factory default after push the Reset Button button for 3 seconds. Huawei Technologies Proprietary...
- Page 57 Physical and Environmental Specifications Power Adapter: 12 V AC 1.5 A ℃ 32°F–104°F) Working Temperature: 0℃ – 40 5% – 95% (non-condensing) Humidity: Dimensions: 270 mm × 193 mm × 37 mm Weight: 700 g Huawei Technologies Proprietary...
-
Page 58: Chapter 5 Appendix
Asynchronous Transfer Mode Denial of Service DHCP Dynamic Host Configuration Protocol Domain Name Server Demilitarized Zone DSLAM Digital Subscriber Line Access Multiplex ISDN Integrated Service Digital Network Internet Protocol ICMP Internet Control Message Protocol Internet Service Provider Huawei Technologies Proprietary... - Page 59 Local Area Network Media Access Control Network Address Translation Point to Point Protocol PPPoA PPP over ATM PPPoE PPP over Ethernet PSTN Public switched telephone network Permanent Virtual Connection Quality of Service Routing Information Protocol Huawei Technologies Proprietary...
- Page 60 Transfer Control Protocol TKIP Temporal Key Integrity Protocol User Datagram Protocol UPnP Universal Plug and Play Universal Serial Bus Virtual Channel Identifier Virtual Path Identifier Wide Area Network Wireless encryption Protocol Weighted Fair Queuing Wi-Fi Protected Access Huawei Technologies Proprietary...
- Page 61 Huawei Technologies Co., Ltd. Administration Building, Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, P. R. China Postal Code: 518129 Website: http://www.huawei.com Email: terminal@huawei.com...