hit counter script

Transporting The Machine - Toro TITAN HD 1500 Operator's Manual

48 in, 52 in, or 60 in riding mower
Hide thumbs Also See for TITAN HD 1500:
Table of Contents

Advertisement

N
-
position, apply the parking brake,
EUTRAL
LOCK
and remove the key.
2.
Locate the bypass levers behind the seat, down
on the left and right side of the frame.
3.
To push the machine, move both bypass knobs
rearward and lock them into place
4.
Disengage the parking brake before pushing
the machine.
Figure 34
1. Front of the machine
2. Rotate bypass release knob counterclockwise to loosen.
3. Lever position for operating the machine
4. Pull the lever in this direction to push the machine.
5. Lever position for pushing the machine
6. Rotate the bypass-release knob clockwise to tighten.
7. Engine
8. Release lever
5.
To run the machine, move the bypass knobs to
the F
position and lock them into place
ORWARD
(Figure
34).

Transporting the Machine

Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
necessary brakes, lighting, and marking as required
by law. Please carefully read all the safety instructions.
Knowing this information could help you, your family,
pets, or bystanders avoid injury.
WARNING
Driving on the street or roadway without
turn signals, lights, reflective markings, or a
slow-moving-vehicle emblem is dangerous
and can lead to accidents, causing personal
(Figure
34).
injury.
Do not drive the machine on a public street
or roadway.
1.
2.
3.
4.
5.
g035062
1. Tie-down loops
32
If you are using a trailer, connect it to the towing
vehicle and connect the safety chains.
If applicable, connect the trailer brakes.
Load the machine onto the trailer or truck.
Shut off the engine, remove the key, set the
brake, and close the fuel valve.
Use the metal tie-down loops on the machine to
securely fasten the it to the trailer or truck with
straps, chains, cable, or ropes
Figure 35
(Figure
35).
g036851

Advertisement

Table of Contents
loading

Table of Contents

Save PDF