Page 18
Foam packing material Corrugated sleeve To remove the locking inserts, press the inner latch mechanism together to release them and then pull them out.
Page 24
Be sure to thread the screw through this nut to securely attach each clip nut to the rack. Installed rack mount flange Installed cable management tray Installed rack mount flange...
Page 27
Screw position (Telco rack) Screw position (Metric rack) Screw position (Telco rack) Screw position (Metric rack) Screw position (Metric rack) Screw position (Telco rack) Screw position (Metric rack) Screw position (Telco rack)
Page 36
Serial Number Input Rating Label Warnings Label STANDBY Position ON/STANDBY Switch Keyed-Connector ON Position...
Page 37
Terminal Ring 2 Red Wires (-48 Volt DC) Safety Label 2 Black Wires Keyed-Connector (0 Volt Return) 1 Green/Yellow Ground Wire...
Page 38
For 0 Volt return Terminal Ring and -48 Volt Flat Washer Screw Red/Black Wire For Ground Terminal For Ground Terminal Tinned braid Terminal Ring or equivalent Screws Screw Star Washer Star Washers Green/Yellow Ground Wire Green/Yellow Ground braid "Standard" Installation "Bellcore"...
Page 64
POWER SUPPLY Power Supply LEDs Power Supply LEDs Fan 1 LED Fan 2 LED Fan 3 LED Active LED Standby LED Temperature LED LED Test Button Reset Button 8000-RCTL...
Page 66
System Status LCD Reset LED Display Control Button Power Supply LED's POWER ATM Reset Button SUPPLY FAN LED's Temp LED Test RS-232 Console Port RJ-45 Ethernet Port...
Page 80
Fan Unit Fan Connector Cable Fan Connector Screw (one at each comer)