C.7 LOGICAL NODES
C.7LOGICAL NODES
The UR-series of relays supports IEC 61850 logical nodes as indicated in the following table. Note that the actual instantia-
tion of each logical node is determined by the product order code. For example. the logical node "PDIS" (distance protec-
tion) is available only in the D60 Line Distance Relay.
Table C–1: IEC 61850 LOGICAL NODES (Sheet 1 of 3)
NODES
L: SYSTEM LOGICAL NODES
LPHD: Physical device information
LLN0: Logical node zero
P: LOGICAL NODES FOR PROTECTION FUNCTIONS
C
PDIF: Differential
PDIR: Direction comparison
PDIS: Distance
PDOP: Directional overpower
PDUP: Directional underpower
PFRC: Rate of change of frequency
PHAR: Harmonic restraint
PHIZ: Ground detector
PIOC: Instantaneous overcurrent
PMRI Motor restart inhibition
PMSS: Motor starting time supervision
POPF: Over power factor
PPAM: Phase angle measuring
PSCH: Protection scheme
PSDE: Sensitive directional earth fault
PTEF: Transient earth fault
PTOC: Time overcurrent
PTOF: Overfrequency
PTOV: Overvoltage
PTRC: Protection trip conditioning
PTTR: Thermal overload
PTUC: Undercurrent
PTUV: Undervoltage
PUPF: Underpower factor
PTUF: Underfrequency
PVOC: Voltage controlled time overcurrent
PVPH: Volts per Hz
PZSU: Zero speed or underspeed
R: LOGICAL NODES FOR PROTECTION RELATED FUNCTIONS
RDRE: Disturbance recorder function
RADR: Disturbance recorder channel analogue
RBDR: Disturbance recorder channel binary
RDRS: Disturbance record handling
RBRF: Breaker failure
RDIR: Directional element
RFLO: Fault locator
RPSB: Power swing detection/blocking
RREC: Autoreclosing
C-26
UR-FAMILY
C30 Controller System
APPENDIX C
C.7.1 LOGICAL NODES TABLE
Yes
Yes
Yes
---
Yes
---
---
---
---
---
Yes
---
---
---
---
---
---
---
Yes
---
Yes
Yes
Yes
---
Yes
---
---
---
---
---
---
---
---
---
Yes
---
Yes
Yes
Yes
GE Multilin