Advertisement
Quick Links
Ready and Error Lights
The ready (green) and error (red) lights on
the top of the printer may be the first
indication of trouble. The status of the lights,
on, off, or flashing, indicates the status of
your printer as described below.
The Status Alert window in the EPSON
Status Monitor 3 utility indicates what type
of error has occurred and offers you a
possible solution. Look through this section
to find the kind of problem you have, then
try the recommended solutions in the order
they are presented until your problem is
solved.
ready light
ON
Flashing
Flashing slowly
Lights
Printer Status
Printer's power is turned off.
Printer is ready for printing, in
stand-by mode, or printing a job.
Warning indicated for items other
than consumables. To get current
information about the printer,
check the EPSON Status Monitor 3
utility.
Printer is warming up, receiving
data, or adjusting for printing.
error light
OFF
EPSON AcuLaser C7000 Quick Reference
Flashing
simultaneously
Flashing
alternately
Note:
If the problem remains after trying the
suggestions in this section, contact your dealer
for assistance.
A consumable product is almost
used up. Check the alert message
on the EPSON Status Monitor 3
utility and replace the
consumable with a new one.
There is an error that can be easily
remedied. Check the alert
message on the EPSON Status
Monitor 3 utility for a solution.
The cover of the printer is open,
the printer is out of paper, or paper
is jammed in the printer. When
printing with the duplex unit, make
sure that the paper size setting is
correct.
Memory module is not installed or
installed incorrectly in the S0 slot.
See "Memory Module" in the
Reference Guide.
Reference Guide.
Reference Guide.
Reference Guide.
A protocol error has occurred. Try
turning off the printer and then
turning it back on. If this does not
clear the error, contact your
dealer or a qualified service
person.
An error has occurred. Try turning
off the printer and then turning it
back on. If this does not clear the
error, contact your dealer or a
qualified service person.
Ready and Error Lights (1/1)
Advertisement
Related Manuals for Epson AcuLaser C7000
Summary of Contents for Epson AcuLaser C7000
-
Page 1: Ready And Error Lights
There is an error that can be easily remedied. Check the alert The Status Alert window in the EPSON message on the EPSON Status Status Monitor 3 utility indicates what type Monitor 3 utility for a solution. -
Page 2: Clearing Jammed Paper
EPSON AcuLaser C7000 Quick Reference Clearing Jammed Paper When paper is jammed in the printer, the Paper Jam - the Lower Cassette EPSON Status Monitor 3 utility provide alert messages. This section describes how to clear paper jams from the printer’s standard and optional lower cassettes. - Page 3 EPSON AcuLaser C7000 Quick Reference Paper Jam - Cover A (Jam A) 3. Remove the stack of paper from the cassette. Follow these steps to clear paper jams in the 4. Tap the stack of paper on a flat surface to output path cover.
- Page 4 EPSON AcuLaser C7000 Quick Reference 3. Close the output path cover. 2. Pull the lever up to release the paper path. When the paper jam is cleared completely Warning: and the output path cover (cover A) is Do not touch the fuser, which is closed, the jammed page’s print data is...
- Page 5 EPSON AcuLaser C7000 Quick Reference 4. Gently remove the jammed paper with When the paper jam is cleared completely both hands. Be careful not to tear the and the fuser unit (unit B) is pushed back jammed paper. into the printer, the jammed page’s print data is automatically reprinted.
- Page 6 EPSON AcuLaser C7000 Quick Reference 3. Gently remove the jammed paper with 6. Push the paper path unit back into the both hands. printer firmly. Note: When the paper jam is cleared completely If paper is torn, be sure to remove all torn and the paper path unit (unit C) is pushed pieces.
- Page 7 EPSON AcuLaser C7000 Quick Reference 2. Gently remove the jammed paper with 1. Open the cover (cover E) on the right both hands. Be careful not to tear the side of the optional Large Capacity jammed paper. Paper Unit. 3. Close the paper cassette cover.
- Page 8 EPSON AcuLaser C7000 Quick Reference Paper Jam - Cover F (Jam F) Note: If you cannot find any jammed paper in this cover, check the paper cassette cover (cover D), Follow these steps to clear paper jams in the then the optional Duplex Unit’s main unit (unit Duplex Unit’s inverter cover.
- Page 9 EPSON AcuLaser C7000 Quick Reference Note: If paper is torn, be sure to remove all torn pieces. 3. Push the main unit of the Duplex Unit’s main unit back into the printer. When the paper jam is cleared completely and the Duplex Unit’s main unit (unit G) is pushed back into the printer, the jammed page’s print data is automatically reprinted.