hit counter script

Positioning The Seat - Toro 74265TE Operator's Manual

Z master professional 7000 series with 132cm or 152cm turbo force side discharge mower
Hide thumbs Also See for 74265TE:
Table of Contents

Advertisement

1. Triangles light up when the interlock components are in the
correct position
Testing the Safety-Interlock System
Service Interval: Before each use or daily
Test the safety-interlock system before you use the machine
each time. If the safety system does not operate as described
below, have an Authorized Service Dealer repair the safety
system immediately.
1. Sitting on the seat, engage the parking brake and move
the blade-control switch (PTO) to the O
Try starting the engine; the engine should not start.
2. Sitting on the seat, engage the parking brake and
move the blade-control switch (PTO) to the O
position. Move either motion-control lever (out of the
N
-
position). Try starting the engine; the
EUTRAL
LOCK
engine should not start. Repeat for the other control
lever.
3. Sitting on the seat, engage the parking brake, move the
blade-control switch (PTO) to the O
move the motion-control levers to the N
position. Now start the engine. While the engine
is running, disengage the parking brake, engage the
blade-control switch (PTO), and rise slightly from the
seat; the engine should shut off.
4. Sitting on the seat, engage the parking brake, move the
blade-control switch (PTO) to the O
move the motion-control levers to the N
position. Now start the engine. While the engine
is running, center either motion control and move
(forward or reverse); the engine should shut off. Repeat
for other motion control.
5. Sitting on the seat, disengage the parking brake,
move the blade-control switch (PTO) to the O
position, and move the motion-control levers to the
N
-
position. Try starting the engine; the
EUTRAL
LOCK
engine should not start.
Figure 13
position.
N
position, and
FF
EUTRAL
position, and
FF
EUTRAL

Positioning the Seat

The seat moves forward and backward. Position the seat
where you have the best control of the machine and are most
comfortable.
To adjust, move the lever sideways to unlock the seat
14).
g009612
g019754
Unlatching the Seat
1. Move the seat to the most rearward position.
Note: This prevents interference when you raise the
seat.
2. Push the seat latch rearward to unlatch the seat.
FF
3. Raise the seat up
Note: This allows access to the machine under the
seat.
-
LOCK
-
LOCK
1. Seat latch
2. Fuel cap
FF
20
Figure 14
(Figure
15).
Figure 15
3. Seat
(Figure
g019754
g000950

Advertisement

Table of Contents
loading

This manual is also suitable for:

74264te

Table of Contents