Advertisement
Quick Links
HUAWEI USG6306/6308/6330/6350/6360/6370/6380/6390/6390E/6507/6530/6550/6570/6620/6630
V500R001
Quick Start
Issue: 03
Part Number: 31507764
Date: 2017-06-15
Thank you for using Huawei USG6306/6308/6330/6350/6360/6370/6380/6390/6390E/6507/6530/6550/6570/6620/6630 prod-
ucts. This USG product series protects your network against Internet threats. This Quick Start shows the product appearance
and provides the essential information required for installing the device and setting up Internet access. For detailed hardware
description and installation guidelines, refer to the
Guide
.
Safety Precautions
Be aware of the following safety precautions when installing the device.
• Deactivate power whenever possible before performing maintenance on power cables.
• Always wear a properly-grounded wrist strap before touching the device or expansion cards in it.
Device and Accessories
Your product package includes the following items:
Rear panel
SM-HDD-SAS300G-B
SN label (including the
SN and product model)
Management
port
10/100/1000M autosensing
Ethernet electrical port
2
0/1
3
SYS
PWR
MGMT
MGMT
0
1
2
3
4
5
6
7
8
Secospace USG6000
2
0/1
ALM
HDD
MODE
3
1
0
RST
CONSOLE
ESD jack
Console port
4x1GE SFP
• The figure above uses the USG6370/6380/6390/6390E/6550/6570/6620/6630 as an example. The fixed interface board
on the front panel provides 8 10/100/1000M autosensing Ethernet electrical ports, 4 GE optical ports, and 2 USB ports.
The power module on the rear panel is removable. For the USG6306/6308/6330/6350/6360/6507/6530, the fixed interface
board on the front panel provides 6 service ports (4 GE electrical ports and 2 combo ports) and 1 USB port, and the power
module on the rear panel is non-removable.
• AC power cables vary by country or area, and the AC power cable in the figure is used for reference only.
Cabling
1. Connect the ground terminal on the device to the ground bar using a PGND cable.
2. Connect the device to the WAN through GE1/0/4 or by inserting an 4G LTE dongle on the USB port (the
USG6390E/6620/6630 does not support Internet access in 4G mode). Connect the device to the LAN through GE1/0/6
(GE1/0/4 and GE1/0/6 are examples, and you can use other ports as required).
Hardware Guide
Power socket
4 HDD
INPUT OUTPUT
ON
XXXXXXXXXXXXXXXXXXXXXXXXXXX
OFF
~100-240V;50/60Hz;2.5A
Protection ground
terminal
WSIC(Slot 2)
9
10
11
WSIC(Slot 3)
. For detailed configurations, refer to the
5 PWR 6 PWR
Secospace USG6000
4 HDD
5 PWR 6 PWR
Rack-mounting ears
M4 screw
Front panel
AC power cable
Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
1
All other trademarks and trade names mentioned in this document are the
property of their respective holders.
Administrator
Rubber feet
Quick start
M6 screw
Power cable
retention clip
PGND cable
Advertisement
Related Manuals for Huawei USG6306
Summary of Contents for Huawei USG6306
- Page 1 8 10/100/1000M autosensing Ethernet electrical ports, 4 GE optical ports, and 2 USB ports. The power module on the rear panel is removable. For the USG6306/6308/6330/6350/6360/6507/6530, the fixed interface board on the front panel provides 6 service ports (4 GE electrical ports and 2 combo ports) and 1 USB port, and the power module on the rear panel is non-removable.
- Page 2 3. Connect the device's MGMT port to the administrator PC using a network cable. 4. Insert the cable retention clip into the hole close to the power socket. Then insert the power cable into the socket, and fix it using the clip. 5.
- Page 3 Item Port Description GE1/0/6 IP Address: 10.0.0.1 The LAN IP address range shall be pre-determined. Subnet Mask: 255.255.255.0 DHCP server IP address range: 10.0.0.1 to 10.0.0.254 1. Set the IP address to 192.168.0.2 (or any other in the range of 192.168.0.2 to 192.168.0.254) and subnet mask to 255.255.255.0 of the corresponding network interface on the administration PC.
-
Page 4: Activating Licenses
You can access the device web UI and click Open Source Software Notice at the bottom of the UI to view details of the open source software notice. • Obtaining Product Documents and Technical Support • Log in to http://support.huawei.com/enterprise, and select a specific product model and version to find its documenta- tion. • Log in to http://support.huawei.com/ecommunity... - Page 5 Huawei Enterprise Technical Support • Contact your local representative for further information. The contact information is available at http://e.huawei.com/en/service-hotline HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian Longgang Shenzhen 518129 People's Republic of China e.huawei.com...