Table of Contents
Advertisement
Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
no-aggregator-id
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
1630
no-aggregator-id;
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name neighbor address],
[edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address],
[edit routing-instances routing-instance-name protocols bgp],
[edit routing-instances routing-instance-name protocols bgp group group-name],
[edit routing-instances routing-instance-name protocols bgp group group-name
neighbor address]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Set the router ID in the BGP aggregator path attribute to zero. (This is one of the path
attributes included in BGP update messages.) Doing this prevents different routing devices
within an AS from creating aggregate routes that contain different AS paths.
If you omit this statement, the router ID is included in the BGP aggregator path attribute.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Overview of BGP Messages
Controlling BGP Route Aggregation
Advertisement
Chapters
Table of Contents
Troubleshooting
