hit counter script
Panasonic HC-W580 Basic Owner's Manual

Panasonic HC-W580 Basic Owner's Manual

High definition video camera
Table of Contents

Advertisement

Quick Links

Please read these instructions carefully before using this product, and save this manual for future
use.
More detailed operating instructions are available in "Owner's Manual
(PDF format)". To read it, download it from the website.
https://eww.pavc.panasonic.co.jp/hdw/oi/W580/
≥ Click the desired language.
Register online at http://shop.panasonic.com/support
If you have any questions, visit :
U.S.A. : http://shop.panasonic.com/support
Canada : www.panasonic.ca/english/support
Basic Owner's Manual
High Definition Video Camera
Model No.
HC-W580
HC-V380
(U.S. customers only)
SQT1139

Advertisement

Table of Contents

Troubleshooting

loading

Summary of Contents for Panasonic HC-W580

  • Page 1 More detailed operating instructions are available in “Owner’s Manual (PDF format)”. To read it, download it from the website. https://eww.pavc.panasonic.co.jp/hdw/oi/W580/ ≥ Click the desired language. Register online at http://shop.panasonic.com/support (U.S. customers only) If you have any questions, visit : U.S.A. : http://shop.panasonic.com/support Canada : www.panasonic.ca/english/support...
  • Page 2: Safety Precautions

    Dear Customer, Date of Purchase Thank you for choosing Panasonic! You have purchased one of the most Dealer Purchased From sophisticated and reliable products on the market today. Used properly, we’re sure it Dealer Address will bring you and your family years of enjoyment.
  • Page 3 Declaration of Conformity Trade Name: Panasonic Model No.: HC-W580/HC-V380 Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Support Contact: http://shop.panasonic.com/support HC-W580 HC-V380 THE FOLLOWING APPLIES ONLY IN CANADA.
  • Page 4 THE FOLLOWING APPLIES ONLY IN THE U.S.A. Contains FCC ID: VPYLBVX532 FCC CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. 12) Use only with the Keep these instructions.
  • Page 6 AC adaptor This AC adaptor operates on AC between 110 V and 240 V. ≥ In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power supply only. ≥ When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit the AC outlet configuration.
  • Page 7 Recommended humidity: 40%RH to 60%RH) ≥ Always use the supplied HDMI mini cable or ≥ To store the battery for a long period of time, a genuine Panasonic HDMI mini cable we recommend you charge it once every year (RP-CDHM15, RP-CDHM30: optional).
  • Page 8 Copy the image to a disc using the ∫ Cards that you can use with HD Writer LE 3.1. this unit j Copy the image to a Panasonic Blu-ray disc recorder that supports AVCHD SD Memory Card, SDHC Memory Card and Progressive.
  • Page 9 [USB connect]: Abbreviation used in this Model number Displays the website on a PC connected to Owner’s Manual this unit with the USB cable. Click [OIBOOK], HC-W580 [W580] W580 which will be displayed on the PC. HC-V380 [V380] V380...
  • Page 10: Table Of Contents

    Contents Accessories..........11 Wi-Fi Preparation ® What you can do with the Wi-Fi function ............27 Power supply..........12 [Link to Cell] ..........28 Inserting/removing the battery ....12 Install the “Image App”......28 Charging the battery ......13 Preparations before using Charging and recording time ....
  • Page 11: Accessories

    Product numbers correct as of Nov. 2015. These may be subject to change. Battery pack VW-VBT190 AC adaptor VSK0815F DC cable K2GHYYS00002 USB cable K2KYYYY00236 HDMI mini cable K1HY19YY0021 (For U.S.A. only) If accessories are lost, customers can visit us at http://shop.panasonic.com/support for further information about obtaining replacement parts. (ENG) SQT1139...
  • Page 12: Preparation

    ≥ The unit has a function for distinguishing batteries which can be used safely. The dedicated battery (VW-VBT190/VW-VBT380) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic. Panasonic cannot in any way guarantee the quality, performance or safety of batteries which have been manufactured by other companies and are not genuine Panasonic products.
  • Page 13: Charging The Battery

    ≥ Do not use any other DC cables except the supplied one. ≥ Do not use any other AC adaptors except the supplied one. ≥ We recommend using Panasonic batteries (l 12). ≥ If you use other batteries, we cannot guarantee the quality of this product.
  • Page 14: Charging And Recording Time

    ≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. Charging and recording time ∫ Charging/Recording time ≥ The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/ low temperature.
  • Page 15: Recording To A Card

    SDXC Memory Card 48 GB to 128 GB ≥ Please check the latest information on the support website below. http://panasonic.jp/support/global/cs/e_cam (This website is in English only.) ≥ We do not guarantee the operation of SD cards other than the ones above.
  • Page 16: Inserting/Removing An Sd Card

    Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 26) When the SD card is formatted, all of the recorded data is deleted.
  • Page 17: Selecting A Mode

    Preparation Selecting a mode You can switch this unit between Recording Mode (Motion Picture Recording Mode/Still Picture Recording Mode) and Playback Mode by pressing the recording/playback button. If you touch the recording mode switching icon in Recording Mode, this unit can be switched between Motion Picture Recording Mode and Still Picture Recording Mode.
  • Page 18: How To Use The Touch Screen

    ≥ If the recording start/stop button is pressed in Still Picture Recording Mode or Playback Mode, this unit will be switched to Motion Picture Recording Mode. During motion picture/still picture playback or in other conditions, even if the recording start/stop button is pressed, the recording mode may not be switched.
  • Page 19: About The Touch Menu

    About the Touch Menu Touch (left side)/ (right side) of the Touch Menu to switch the operation icons. ≥ It is also possible to switch the operation icons by  sliding the Touch Menu right or left while touching it. A Touch Menu ∫...
  • Page 20: Setting Your Home Region For The First Time

    Preparation Setting your home region for the first time You can set your home region in [SET WORLD TIME]. Select the menu. (l 26) : [SETUP] # [SET WORLD TIME] MENU ≥ A message will be displayed. Touch [ENTER]. Touch to select your home ...
  • Page 21: Recording Motion Pictures

    Mode Effect You can switch the mode to the Intelligent Auto Mode, which optimizes settings to the recording environment Intelligent Auto you are in. You can add manually-adjusted brightness and color balance settings to the Intelligent Auto Mode, and Intelligent Auto Plus record.
  • Page 22: Recording Still Pictures

    Basic Recording still pictures Open the LCD monitor, and set this unit to Still Picture Recording Mode. (l 17) Press the button halfway. (For Auto Focus only) Press the button fully. Basic Recording with the Sub Camera (Twin Camera) [W580] ...
  • Page 23: Using The Zoom

    ≥ Recording only with the Sub Camera is not possible. ≥ An image recorded with the Main Camera and the Sub Camera’s image displayed on the Sub Window are recorded as a single scene or still picture. When you play back such a scene or still picture, it is not possible to delete only the Sub Window image or hide it.
  • Page 24: Motion Picture/Still Picture Playback

    Basic Motion picture/Still picture playback Set this unit to Playback Mode (l 17). Touch the play mode select icon A (l 19).  ≥ You can also set by touching , selecting [VIDEO MENU SETUP] or [PICT. SETUP] # [MEDIA, VIDEO/ ...
  • Page 25: Watching Video/Pictures On Your Tv

    ≥ The following icons are displayed on thumbnails when [ALL AVCHD] or [1080/60i] is touched: j AVCHD [1080/60p] scene: j AVCHD [PH] scene: j AVCHD [HA] scene: j AVCHD [HG] scene: j AVCHD [HE] scene: ≥ The following icons are displayed on thumbnails when [ALL MP4/iFrame] is touched: j MP4 [1080/60p] scene: (Blue) (Recording mode [1080/50M]) (Recording mode [1080/28M])
  • Page 26: Using The Menu Screen

    Basic Using the menu screen ≥ Touch (left side)/ (right side) of on the Touch Menu to display . (l 19) MENU Touch MENU ∫ About guide display After touching , touching the submenus and items will cause function descriptions and settings confirmation messages to appear.
  • Page 27: Wi-Fi

    Wi-Fi ® What you can do with the Wi-Fi function This unit offers the following Wi-Fi functions when used in combination with another Wi-Fi compatible device. You can display the image transmitted from a Wireless Sub Camera [TWIN CAMERA] connected via Wi-Fi on this unit’s Sub Window and record it simultaneously with the Main Camera’s image.
  • Page 28: [Link To Cell]

    Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when you use this function. Use at your own risk. Install the “Image App” About the “Image App” The “Image App” is an application provided by Panasonic. For Android apps For iOS apps Android 4.0 or later...
  • Page 29: Preparations Before Using [Link To Cell]

    Preparations before using [Link to Cell] Install the “Image App”. (l 28) Setting up a direct Wi-Fi connection between this unit and a smartphone Setting up a direct connection between this unit and the smartphone when [Direct Connection Password] is set to [OFF] (l 30) ≥...
  • Page 30: Using [Link To Cell] With A Direct Connection

    Using [Link to Cell] with a direct connection Setting up a direct connection between this unit and the smartphone when [Direct Connection Password] is set to [OFF] Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch [Direct Connection]. ≥...
  • Page 31: About [Link To Cell]

    About [Link to Cell] Screen display during remote operations Smartphone screen shots are example displayed in Motion Picture Recording Mode and Playback Mode. Recording screen 1 Recording media/remaining recordable time 2 Remaining battery power of this unit 3 Zoom 4 Photoshot button ...
  • Page 32: Wireless Twin/Multi-Camera Function

    ∫ Wireless Twin Camera function For information on non-smartphone devices that support the Wireless Sub Camera function and the procedures for using them, check the support website below. (As of November 2015) http://panasonic.jp/support/global/cs/e_cam Wireless Multi-Camera function (l 27) ∫ ≥ For information on how to connect this unit and a smartphone and other details, refer to the Owner’s Manual (PDF format).
  • Page 33: Others

    Others Troubleshooting ∫ It is not a malfunction in following cases A clicking sound is heard ≥ This is the sound of the lens moving and is not a defect. when the unit is shaken. This sound will no longer be heard when the unit is turned on and set this unit to the Motion Picture Recording Mode or Still Picture Recording Mode.
  • Page 34 Recording Problem Check points Color or brightness of the ≥ Color or brightness of the image may change, or you may see image changes, or you horizontal bars in the image when the object is recorded may see horizontal bars in under fluorescent light, mercury light or sodium light, etc., but the image.
  • Page 35: About Copyright

    “AVCHD Progressive” logo are trademarks of provider licensed to provide AVC Video. No Panasonic Corporation and Sony license is granted or shall be implied for any Corporation. other use. Additional information may be ≥...
  • Page 36 Menu” in the Owner’s Manual (PDF format). At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0 or LGPL V2.1, as well as the respective...
  • Page 37: Specifications

    Others Specifications High Definition Video Camera Information for your safety ≥ Refer to the owner’s manual (PDF format) Power source: for the picture size and recordable time of a DC 5.0 V (When using AC adaptor) motion picture. DC 3.6 V (When using battery) Still picture recording format: JPEG (Design rule for Camera File system, Power consumption:...
  • Page 38 Zoom: Dimensions: i.Zoom OFF 62k*, 90k i.Zoom, 150k/ 60 mm (W)k62 mm (H)k129 mm (D) 3000k digital zoom [2.362 q (W)k2.441 q (H)k5.079 q (D)] (Using image sensor effective area) (including projecting parts) Mass (Weight): * When [O.I.S.] is set to [Standard] and Level W580 Shot Function is set to off.
  • Page 39 AC adaptor Information for your safety Power source: AC 110 V to 240 V, 50/60 Hz AC input: 0.25 A DC output: DC 5.0 V, 1.8 A Dimensions: 66.4 mm (W)k58.5 mm (H)k31 mm (D) [2.62 q (W)k2.30 q (H)k1.22 q (D)] Mass (Weight): Approx.
  • Page 40: Optional Accessories

    Video Camera Mount (For Handlebar) * Please refer to page 14, concerning the battery charging time and available recording time. (For U.S.A. only) To order optional accessories please visit http://shop.panasonic.com or your local Photo Specialty Dealer. NOTE: Accessories and/or model numbers may vary by country. Please consult your local dealer.
  • Page 41: Limited Warranty (Only For U.s.a.)

    If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts,...
  • Page 42 If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake, VA 23320 PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
  • Page 43: Warranty (For Canadian Customers)

    Camcorder Products - One (1) year, parts and labour This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.
  • Page 44 Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 http://shop.panasonic.com Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 www.panasonic.com © Panasonic Corporation 2015 Printed in Malaysia...
  • Page 45 Owner’s Manual High Definition Video Camera HC-W580 Model No. HC-V380 Please read these instructions carefully before using this product, and save this manual for future use. Register online at http://shop.panasonic.com/support (U.S. customers only) SQW0508...
  • Page 46 HD Writer LE 3.1. prevented. (When the difference in temperature j Copy the image to a Panasonic Blu-ray is severe, place the unit in a plastic bag or the disc recorder that supports AVCHD like, remove air from the bag, and seal the bag.)
  • Page 47 Abbreviation used in this Model number SDXC Memory Card owner’s manual ≥ 4 GB or more Memory Cards that do not have HC-W580 [W580] the SDHC logo or 48 GB or more Memory W580 Cards that do not have the SDXC logo are...
  • Page 48 Contents Read this first ..........2 Recording with the Backup for Twin Camera Function..........50 Preparation Changing the Recording Mode ....51 Intelligent Auto ........52 Intelligent Auto Plus ....... 54 Names and Functions of Main Parts .... 7 Creative Control ........54 Power supply..........
  • Page 49 Deleting scenes/still pictures ....105 [Live Cast]...........152 Deleting part of a scene Preparations before using (AVCHD/Backup for Twin Camera)..107 [Live Cast] ..........153 Dividing a scene (AVCHD/ Broadcasting live........154 Backup for Twin Camera) ....108 Install the “Image App”......158 Dividing a scene to partially delete Setting Up a Wi-Fi Connection....159 (MP4/iFrame)........
  • Page 50 With a PC What you can do with a PC ....... 199 Before Installing HD Writer LE 3.1..201 Operating environment ......203 Installation ..........205 Connecting to a PC........206 About the PC display ......208 Starting HD Writer LE 3.1 ......209 Reading the operating instructions of the software applications .....
  • Page 51: Preparation

    Preparation Names and Functions of Main Parts V380 Lens cover Speaker ≥ W580 Recording/playback button [ The lens cover opens in Motion Picture Recording Mode or Still Picture Recording W580 Mode. HDR button [ V380 V380 Lens cover opening/closing switch Level Shot Function button [ When not using the unit, close the lens cover to protect the lens.
  • Page 52 16 17 Tripod receptacle Status indicator 17, 159) ≥ Attaching a tripod with a screw length of Recording start/stop button 5.5 mm (0.22 q) or more may damage the Battery holder unit. LCD monitor (Touch screen) Sliding stand When using this unit on a desk or any flat surface, pull out the sliding stand as illustrated below to keep this unit stable.
  • Page 53 DC input terminal [DC IN] Photoshot button [ ≥ Do not use any other AC adaptors except the Zoom lever [W/T] (In Motion Picture supplied one. Recording Mode or Still Picture Wi-Fi Transmitter 130) Recording Mode) 42)/ Shoulder strap fixture Thumbnail display switch [ Grip belt 29)/...
  • Page 54: Power Supply

    ≥ The unit has a function for distinguishing batteries which can be used safely. The dedicated battery (VW-VBT190/VW-VBT380) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic. Panasonic cannot in any way guarantee the quality, performance or safety of batteries which have been manufactured by other companies and are not genuine Panasonic products.
  • Page 55: Charging The Battery

    Please refer to page 207. ≥ If the status indicator flashes at a particularly fast or slow rate, refer to page 224. ≥ We recommend using Panasonic batteries 12). ≥ If you use other batteries, we cannot guarantee the quality of this product.
  • Page 56: Charging And Recording Time

    Charging and recording time ∫ Charging/Recording time ≥ The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/ low temperature. ≥ Temperature: 25 oC (77 oF)/humidity: 60%RH ≥...
  • Page 57 However, it will be constantly displayed when the remaining battery time becomes less than 30 minutes. ≥ The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. The actual time can vary depending on your actual use.
  • Page 58: Recording To A Card

    SDXC Memory Card 48 GB to 128 GB ≥ Please check the latest information on the support website below. http://panasonic.jp/support/global/cs/e_cam (This website is in English only.) ≥ When using an SDHC Memory Card/SDXC Memory Card with other equipment, check the equipment is compatible with these Memory Cards.
  • Page 59: Inserting/Removing An Sd Card

    Class 10, recording may suddenly stop. Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. 38) When the SD card is formatted, all of the recorded data is deleted.
  • Page 60 ≥ Do not touch the terminals on the back of the ≥ Do not expose the terminals of the SD card to SD card. water, dirt or dust. ≥ Do not apply strong shocks, bend, or drop the ≥ Do not place SD cards in the following areas: SD card.
  • Page 61: Turning The Unit On/Off

    Preparation Turning the unit on/off You can turn the unit on and off using the power button or by opening and closing the LCD monitor. Turning the unit on and off with the power button Open the LCD monitor and press the power button to turn on the unit. To turn off the unit ...
  • Page 62: Selecting A Mode

    Preparation Selecting a mode You can switch this unit between Recording Mode (Motion Picture Recording Mode/Still Picture Recording Mode) and Playback Mode by pressing the recording/playback button. If you touch the recording mode switching icon in Recording Mode, this unit can be switched between Motion Picture Recording Mode and Still Picture Recording Mode.
  • Page 63: How To Use The Touch Screen

    To display the recording mode switching icon Display of the recording mode switching icon will disappear when no touch operation is performed for a specific period of time. To display it again, touch the screen. ≥ The recording mode switching icon does not work when the Wireless Multi-Camera function is in use.
  • Page 64: About The Touch Menu

    About the Touch Menu Touch (left side)/ (right side) of on the Touch Menu to switch the operation icons. ≥ It is also possible to switch the operation icons by sliding the Touch Menu right or left while touching it. A Touch Menu ...
  • Page 65: Setting Date And Time

    Preparation Setting date and time The clock is not set at the time of purchase. Make sure to set the clock. ≥ When you turn on this unit, the message “Set home region and date/time.” may be displayed. Select [YES], and follow the steps below to make these settings: j Step 3 of [SET WORLD TIME] j Steps 2–3 of “Setting date and time”...
  • Page 66: Basic

    Basic Before recording ∫ Basic camera positioning     1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 It is convenient to use the Recording button icon A when holding the unit at waist level. ≥...
  • Page 67: Recording Motion Pictures

    Basic Recording motion pictures Open the LCD monitor, and set  this unit to Motion Picture Recording Mode. Press the recording start/stop  button to start recording. A When you begin recording, ; changes to ¥. B Recording button icon Press the recording start/stop button again to pause recording.
  • Page 68 ≥ If the file size or recording time of a scene recorded with [REC FORMAT] set to [MP4/iFrame] exceeds any of the values below, the scene will be divided automatically. (Recording will continue.) j When using an SD Memory Card/SDHC Memory Card: Approximately 4 GB or 30 minutes j When using an SDXC Memory Card: Varies depending on the setting of [REC FORMAT] and [REC MODE].
  • Page 69: Recording Still Pictures

    Basic Recording still pictures Open the LCD monitor, and set this unit to Still Picture Recording Mode. Press the button halfway. (For Auto Focus only) Focus indication: A Focus indication: ± (The white lamp flashes.): Focusing  ¥ (The green lamp lights up.): When in focus ...
  • Page 70: Recording Still Pictures In Motion Picture Recording Mode

    ∫ About the screen indications in Still Picture Recording Mode Still picture operation indicator 211) R3000 R3000 R3000 MEGA Remaining number of still pictures R3000 ≥ Flashes in red when [0] appears. Size of still pictures MEGA Optical Image Stabilizer MEGA ≥...
  • Page 71: Motion Picture/Still Picture Playback

    Basic Motion picture/Still picture playback Set this unit to Playback Mode 18). Touch the play mode select icon A 20).  ≥ You can also set by touching , selecting [VIDEO SETUP] MENU or [PICT. SETUP] # [MEDIA, VIDEO/PICTURE].  Select the still picture C or the recording ...
  • Page 72 ≥ The following icons are displayed on thumbnails when [ALL AVCHD] or [1080/60i] is touched: j AVCHD [1080/60p] scene: j AVCHD [PH] scene: j AVCHD [HA] scene: j AVCHD [HG] scene: j AVCHD [HE] scene: ≥ The following icons are displayed on thumbnails when [ALL MP4/iFrame] is touched: j MP4 [1080/60p] scene: (Blue) (Recording mode [1080/50M]) (Recording mode [1080/28M])
  • Page 73: Motion Picture Compatibility

    ∫ Change the thumbnail display While the thumbnail is displayed, the thumbnail display changes in the following order if the zoom lever is operated to side or side. 20 scenes () 9 scenes () 1 scene () Highlight & Time Frame Index* * Highlight &...
  • Page 74: Using The Menu Screen

    Basic Using the menu screen ≥ Touch (left side)/ (right side) of on the Touch Menu to display MENU ∫ About guide display Touch MENU After touching , touching the submenus and items will cause function descriptions and settings confirmation messages to appear. ≥...
  • Page 75: Using The Setup Menu

    Basic Using the Setup Menu [DISPLAY] Set the display method for the screen information display. : [SETUP] # [DISPLAY] # desired setting MENU [5 SEC.]: Information is displayed on the screen for 5 seconds after starting the Motion Picture Recording Mode or Still Picture Recording Mode, starting to playback, or touching the screen.
  • Page 76 (Only when setting the region of your travel destination) Touch [DESTINATION]. ≥ Touch [ENTER]. ≥ When the home region is set for the first time, the screen for selecting home/travel destination appears after setting the home region successively. If the home region has already been set once, execute the menu operation for Step 1.
  • Page 77: Date Format

    [DATE/TIME] It is possible to change the date and time display mode. : [SETUP] # [DATE/TIME] # desired display MENU [DATE]/[D/T]/[OFF] ≥ The date and time are not displayed while the recording mode switching icon is displayed. ≥ When the Touch Shutter is enabled, the recording mode switching icon is constantly displayed. This causes the date and time to disappear from the screen.
  • Page 78: Quick Power On

    [ECONOMY (BATT)] When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life. : [SETUP] # [ECONOMY (BATT)] # [ON] MENU ≥ This unit will not automatically turn off even if [ECONOMY (BATT)] is set to [ON] in following cases: j Using the AC adaptor* j Using the USB cable for PC etc.
  • Page 79 [ALERT SOUND] Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this sound. When [OFF] is selected, the sound is not output at the start/end of recording, etc. : [SETUP] # [ALERT SOUND] # desired setting MENU (Volume low)/ (Volume high)/[OFF]...
  • Page 80: Power Lcd

    [POWER LCD] This makes it easier to view the LCD monitor in bright places including outdoors. : [SETUP] # [POWER LCD] # desired setting MENU (Makes brighter)/ (Normal)/ (Makes less bright) ≥ These settings will not affect the images actually recorded. ≥...
  • Page 81 [TV ASPECT] Please refer to page 114. [INITIAL SET] Set to [YES] for changing the menu settings back to the default condition. : [SETUP] # [INITIAL SET] MENU ≥ Settings for [CLOCK SET] and [LANGUAGE] will not be changed. ≥ If you restore the default settings, this unit will switch to the Motion Picture Recording Mode. [Reset Wi-Fi Settings] Set to [YES] for changing the Wi-Fi settings back to the default condition.
  • Page 82: Format Media

    [NUMBER RESET] Set the file number of the MP4/iFrame and still picture recorded next to 0001. : [SETUP] # [NUMBER RESET] MENU ≥ Folder number is updated and file number will start from 0001. 208) ≥ To reset the folder number, format the SD card, and then perform [NUMBER RESET]. ≥...
  • Page 83 [Firmware Upgrade] You can update the firmware version of this unit. : [SETUP] # [Firmware Upgrade] MENU For the latest update information, check the support website below. (As of November 2015) http://panasonic.jp/support/global/cs/e_cam (This Site is English only) - 39 -...
  • Page 84: Demo Mode

    [DEMO MODE] This item is used to start the unit demonstration. : [SETUP] # [DEMO MODE] # [ON] MENU ≥ If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted and while this unit is connected to the AC adaptor, the demonstration automatically starts. If any operation takes place, the demonstration is canceled.
  • Page 85 [SOFTWARE INFO] You can connect this unit and a PC with the USB cable and check software information (License) on the PC. Select the menu. : [SETUP] # [SOFTWARE INFO] MENU Connect this unit to a PC. ≥ A message will be displayed when the connection is complete. On the PC, check [LICENSE.TXT]. ≥...
  • Page 86: Advanced (Recording)

    Advanced (Recording) Using the zoom Zoom lever/Zoom button icons T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out)  A Zoom bar ≥ Maximum zoom ratio for recording motion pictures can be set with [ZOOM MODE]. ∫ About the zoom bar The zoom bar is displayed during the zoom operation.
  • Page 87: Level Shot Function [V380]

    Advanced (Recording) Level Shot Function [V380] This function detects the horizontal tilt of the unit, and automatically corrects it to the level position. (When setting (Normal)) (When setting (Strong)) : With Level Shot Function : Without Level Shot Function Level Shot Function button Each press of this button switches Level Shot Function.
  • Page 88: Hdr Movie Mode [W580]

    Advanced (Recording) HDR Movie Mode [W580] You can minimize the loss of gradations in bright areas and dark areas when, for example, the contrast between the background and the subject is large. HDR button You can switch from Recording mode to HDR Movie Mode by pressing this button.
  • Page 89: Recording With The Sub Camera (Twin Camera) [W580]

    ≥ You can also change this setting by touching its operation icon. ≥ You may not see the full effect depending on the recording conditions. Advanced (Recording) Recording with the Sub Camera (Twin Camera) [W580]  Using the Sub Camera and the Main Camera, you can record two images simultaneously.
  • Page 90 Rotate the Sub Camera dial to adjust its up/  down angle. Rotating the Sub Camera dial to the left : The Sub Camera points down. Rotating the Sub Camera dial to the right : The Sub Camera points up. ≥...
  • Page 91: Changing And Adjusting The Settings Of The Sub Camera And The Sub Window

    ≥ The following button icons may not be displayed when the Sub Window is displayed. To display them, touch the Main Camera’s image on the screen. (Touch Menu) (Zoom button icons) (Recording button icon) j Recording Mode button icon ≥ The following functions do not work when the Sub Window is displayed: j Touch Shutter j Creative Control Mode j [FACE FRAMING]...
  • Page 92 j When [PICTURE SIZE] in Still Picture Recording Mode is set to [ 7.4M], [ 0.3M], 7.7M] or [ 2M]: 3 : 2 3 : 2 Aspect ratio 4:3 or 3:2* Size * The Sub Window will be displayed in the aspect ratio set in [PICTURE SIZE]. Changing the display position of the Sub Window Touch Sub Window.
  • Page 93 (When [WB] is touched) Touch to select White Balance Mode. (Automatic White Balance adjustment)/ (Sunny mode)/ (Cloudy mode)/ (Indoor mode 1)/ (Indoor mode 2) (When is touched) Touch to adjust settings. (When is touched)  Touch : Enables Narration Mode. : Disables Narration Mode.
  • Page 94: Recording With The Backup For Twin Camera Function

    Advanced (Recording) Recording with the Backup for Twin Camera Function When simultaneously recording two images with the Main Camera and Sub Camera, you can also record the Main Camera’s image as a separate scene. (Backup for Twin Camera)   ...
  • Page 95: Changing The Recording Mode

    Advanced (Recording) Changing the Recording Mode Touch the Recording Mode button icon. MENU Touch the desired Recording Mode button icon. Mode Effect You can switch the mode to the Intelligent Auto Mode, which optimizes settings to the recording environment Intelligent Auto you are in.
  • Page 96: Intelligent Auto

    Intelligent Auto The following modes (appropriate for the condition) are set just by pointing the unit to what you want to record. Mode Effect Portrait Faces are detected and focused automatically, and the brightness is adjusted so it is recorded clearly. Scenery The whole landscape will be recorded vividly without whiting out the background sky, which may be very bright.
  • Page 97: Intelligent Auto Mode

    ∫ Intelligent Auto Mode When switching to Intelligent Auto Mode, the Automatic White Balance and Auto Focus operate and automatically adjust the color balance and focusing. Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness.
  • Page 98: Intelligent Auto Plus

    Intelligent Auto Plus Please refer to page for details about the effect of each mode. (Portrait)/ (Scenery)/ (Spotlight) (Low Light) (Night Scenery) (Macro) (Normal) (Normal) In Motion Picture Recording Mode only In Still Picture Recording Mode only ≥ Change the Recording Mode to (When adjusting the brightness) Touch (When adjusting the color balance)
  • Page 99: Miniature Effect

    [Miniature Effect] MINI Touch to adjust the horizontal position of the in-focus portion. ≥ If you touch the screen, you can adjust the horizontal position of the in-focus portion. ≥ When no touch operations are performed for approximately 1 second, [Reset], [SIZE], and [ENTER] are displayed. If you touch the screen, you can readjust the horizontal position of the in-focus portion.
  • Page 100 [8mm movie] (When adjusting the brightness) Touch ≥ The level of brightness is switched every time you touch the icon. (Standard) # (Bright) # (Dark) (When adjusting the color balance) Touch ≥ The level of color balance is switched every time you touch the icon. (Blue) # (Red) # (Yellow)
  • Page 101: Time Lapse Rec

    [Time Lapse Rec] INTV Touch the desired setup time. [1 SEC.]/[10 SEC.]/[30 SEC.]/[1 MINUTE]/[2 MINUTES] ≥ Touch [ENTER]. ≥ A frame is recorded with a set recording interval. 30 frames will make up motion picture of 1 second. Setup time Setup example (recording Recording time...
  • Page 102: Scene Mode

    Scene Mode ≥ Change the Recording Mode to Select the desired Scene Mode, then touch [ENTER]. Mode Effect 5Sports: To make fast moving scenes less shaky with slow playback and pause of playback Portrait: To make people stand out against the background Soft Skin: To makes skin colors appear softer for a more attractive appearance...
  • Page 103: Hdr Movie Mode [W580]

    ≥ (Portrait) j Color and screen brightness may change under indoor lighting. ≥ (Soft Skin) j If the background or anything else in the scene has colors similar to the skin color, they will also be smoothed. j If the brightness is insufficient, the effect may not be clear. j If you record a person in the distance, the face may not be recorded clearly.
  • Page 104: Stop Motion Animation Assist

    Stop Motion Animation Assist Before recording in Stop Motion Animation Assist Mode You can create a slideshow that appears to be moving by recording the subject while moved a little at a time. ≥ Each recording group can store up to 999 still pictures recorded in Stop Motion Animation Assist Mode.
  • Page 105: Manual Recording

    Advanced (Recording) Manual recording ≥ The Manual Focus, White Balance, Shutter Speed, Brightness (Iris and Gain) settings are retained when you change between Motion Picture Recording Mode and Still Picture Recording Mode. Touch the to switch to Manual Mode 51), or display the Manual icon 20).
  • Page 106: White Balance

    White Balance Automatic White Balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the White Balance manually. ≥ Switch to Manual Mode. Touch [WB]. FOCUS Touch to select White Balance Mode. SHTR ≥...
  • Page 107: Manual Shutter Speed/Iris Adjustment

    Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Switch to Manual Mode. Touch [SHTR] or [IRIS]. Touch to adjust settings. ≥ Touch [SHTR]/[IRIS] to end the adjustment. : Shutter speed: SHTR 1/60 to 1/8000...
  • Page 108: Manual Focus Adjustment

    Manual Focus adjustment If auto focusing is difficult due to the conditions, then use Manual Focus. ≥ Switch to Manual Mode. (When MF assist function is used) Select the menu. : [RECORD SETUP] # [MF ASSIST] # [ON] MENU ≥ Touch to display the Manual icon.
  • Page 109: Recording With The Touch Function

    Advanced (Recording) Recording with the Touch Function You can record using convenient functions just by the easy operation of touching the screen. Touch (left side)/ (right side) of on the Touch Menu to display Touch Function icons. Touch the Touch Function icon. (e.g.
  • Page 110: Image Stabilizer Function

    Image Stabilizer Function Use the Image Stabilizer to reduce the effects of shake during recording. This unit is equipped with Hybrid Optical Image Stabilizer. Hybrid Optical Image Stabilizer is a hybrid of Optical and Electrical Image Stabilizer. Touch to switch the Image Stabilizer on/off. ≥...
  • Page 111 (Still Picture Recording Mode) : [RECORD SETUP] # [O.I.S.] # [MODE1] or [MODE2] MENU [MODE1]: The function works all the time. [MODE2]: The function works when the button is pressed. We recommend using this mode when you are recording yourself or recording with a tripod in Still Picture Recording Mode.
  • Page 112: Optical Image Stabilizer Lock

    ≥ This function can be used in Intelligent Auto Mode or Intelligent Auto Plus Mode. In Still Picture Recording Mode, this function can only be used with some settings in Scene Mode. ≥ It may track different objects or may not lock the target depending on the recording conditions such as the following: j When the object is too large or too small j When color of the object is similar to the background...
  • Page 113 ∫ To make the display of disappear Display of will not disappear even when no operation is performed for specific time with the default setting. To make the display of disappear, change the setting of the [O.I.S. LOCK DISPLAY]. : [SETUP] # [O.I.S. LOCK DISPLAY] # desired setting MENU [ON]: Constantly display.
  • Page 114: Recording Functions Of Operation Icons

    Advanced (Recording) Recording functions of operation icons Select the operation icons to add different effects to the images to be recorded. Touch (left side)/ (right side) of on the Touch Menu to display the operation icons. Touch an operation icon. (e.g.
  • Page 115: Intelligent Contrast Control

    Fade When you start recording, the image/audio gradually (Fade in) appears. (Fade in) When you pause recording, the image/audio gradually disappears. (Fade out) ≥ The Fade setting is canceled when the recording stops. ∫ To select the color for fade in/out (Fade out) : [RECORD SETUP] # [FADE COLOR] # MENU...
  • Page 116: Intelligent Exposure

    PRE-REC This prevents you from missing a shot. This allows recording of the pictures and sound to start approximately 3 seconds before the recording start/stop button is pressed. appears on the screen. ≥ PRE-REC ≥ Aim the unit at the subject beforehand. ≥...
  • Page 117: Backlight Compensation

    Backlight Compensation This makes the image brighter to prevent darkening of a backlit subject. Tele Macro A more impressive image can be obtained by focusing on the object only in close-up and shading off the background. ≥ The unit can focus on the subject at a distance of approx. 1.1 m (3.6 feet). ≥...
  • Page 118: Level Shot Function

    HDR Effect [W580] You can change the level of image contrast correction in HDR Movie Mode. 44, 59) The icon changes each time you touch it. (Low) # (High) (Low): Sets the correction level to low. (High): Sets the correction level to high. ≥...
  • Page 119: Recording Functions Of Menus

    Advanced (Recording) Recording functions of menus [SCENE MODE] This function is identical to Scene Mode in Recording Mode. The shutter speed and aperture, etc. are automatically adjusted to match the scene you want to record. ≥ This item is displayed in the menu only when [Time Lapse Rec] in Creative Control Mode is set.
  • Page 120: Zoom Mode

    [ZOOM MODE] Set the maximum zoom ratio for the Motion Picture Recording Mode. : [RECORD SETUP] # [ZOOM MODE] # desired setting MENU [i.Zoom OFF]: Up to 62k [i.Zoom 90k]: This zoom function allows you to maintain high-definition picture quality. (Up to 90k) [D.Zoom 150k]: Digital zoom (Up to 150k) [D.Zoom 3000k]:...
  • Page 121: Rec Mode

    [REC MODE] Switch the picture quality and recording format of the motion pictures to record. The recording formats that can be set change according to [REC FORMAT] setting. : [RECORD SETUP] # [REC MODE] # desired setting MENU ≥ When [REC FORMAT] is set to [AVCHD] [PH]/[HA]/[HG]/[HE]: Set the recording format to 1080/60i.
  • Page 122: Face Framing

    [FACE FRAMING] Detected faces appear with frames. : [RECORD SETUP] # [FACE FRAMING] # desired setting MENU [PRIMARY]: Only the prioritized face framing is displayed. [ALL]: All face detection framings are displayed. [OFF]: Cancel the setting. ≥ Up to 5 frames are indicated. Larger faces and faces nearer to the center of the screen take preference over others.
  • Page 123 [LEVEL GAUGE] This function displays the horizontal/vertical tilt of the unit with the electronic level. : [RECORD SETUP] # [LEVEL GAUGE] # [ON] MENU ∫ To correct the tilt (Horizontal direction) (Vertical direction)    When correcting the leftward tilt When correcting the downward tilt ≥...
  • Page 124: Auto Slow Shtr

    [AGS] If the unit continues to be tilted upside down from the normal horizontal position while recording motion pictures, it is automatically put into recording pause. : [RECORD SETUP] # [AGS] # [ON] MENU ≥ The AGS function may activate and cause the unit to pause the recording if you are recording a subject right above or right below you.
  • Page 125: Shooting Guide

    [SHOOTING GUIDE] Message is displayed when this unit is moved rapidly. : [RECORD SETUP] # [SHOOTING GUIDE] # [ON] MENU When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording. ≥ In the following cases, message will not appear: j While pausing the recording (only when [DEMO MODE] is not set to [ON]) j When [LEVEL GAUGE] is set to [ON] [Wind Noise Canceler]...
  • Page 126: Mic Level

    [MIC SETUP] Recording setting of the built-in microphone can be adjusted. ≥ Set [REC FORMAT] to [AVCHD]. : [RECORD SETUP] # [MIC SETUP] # desired setting MENU [STEREO MIC]: Sound from two directions is recorded in 2 ch by forward-facing stereo microphones.
  • Page 127: Picture Size

    [PICTURE ADJUST] Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. ≥ This setting is retained when you change between Motion Picture Recording Mode and Still Picture Recording Mode. ≥...
  • Page 128: Shtr Sound

    Picture size Aspect ratio Extra Optical Zoom 10M] 4224k2376 – 16:9 [16:9] 2.1M] 1920k1080 – 16:9 7.4M] 3136k2352 – [4:3] 0.3M] 640k480 100k 7.7M] 3408k2272 – 3 : 2 [3:2] 1728k1152 – 3 : 2 Extra Optical Zoom cannot be used. The maximum zoom magnification is 62k. Extra Optical Zoom cannot be used.
  • Page 129: Advanced (Playback)

    Advanced (Playback) Playback Operations Motion picture playback using operation icon For details on the basic playback operations, refer to page 27. Playback operation Playback display Operating steps During Playback Touch the LCD monitor and slide from right to left (from left to right) during playback. Skip Playback (to the start of a scene)
  • Page 130: Creating Still Picture From Motion Picture

    ≥ Scenes that are large in file size may cause this unit to respond slower to operations performed by the user or cause certain operations performed by this unit to become slower. Creating still picture from motion picture A single frame from the recorded motion picture can be saved as a still picture. The size of pictures to be recorded is determined by their scene type.
  • Page 131: Highlight & Time Frame Index

    Highlight & Time Frame Index An image of one scene is displayed as a thumbnail at set search condition. Scene can be played back from any midway point of the scene you wish to see. ≥ Operate the zoom lever to side and change over the thumbnail display to Highlight &...
  • Page 132: Resuming The Previous Playback

    Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. : [VIDEO SETUP] # [RESUME PLAY] # [ON] MENU If playback of a motion picture is stopped, appears on the thumbnail view of the stopped scene.
  • Page 133: Various Playback Functions

    Advanced (Playback) Various playback functions Playing back motion pictures/still pictures by date The scenes or the still pictures recorded on the same day can be played back in succession. Touch the date select icon.  A Date select icon Touch the playback date. The scenes or the still pictures recorded on the date selected are displayed as thumbnails.
  • Page 134: Highlight Playback

    ≥ The following scenes and still pictures are grouped separately on the date list, and icons are displayed according to the category: Scene or still picture Icon to be displayed Scenes recorded with [1080/60p] in [AVCHD] Scenes recorded with [1080/50M]/[1080/28M] in [MP4/iFrame] Scenes recorded with [720] in [MP4/iFrame] Scenes saved in MP4 (1280k720/30p) 111)
  • Page 135 Touch the desired effect. [POP]: Recommended for party scene. [NATURAL]: Recommended for scenery. [CLASSICAL]: Recommended for slow moving scene. [DYNAMIC]: Recommended for fast moving scene such as sports scene. [CUSTOM]: Set the combination of the effect and the music. ≥ The scenes matching the effect will be extracted and displayed in the thumbnail view. ≥...
  • Page 136 ∫ Setting up the custom effect It is possible to enjoy the Highlight Playback with your favorite effect by setting up the combination of an image effect and music. Touch [CUSTOM]. Touch [EFFECT SETUP] or [MUSIC SELECT]. (When [EFFECT SETUP] is selected) Touch the desired effect.
  • Page 137 Playing back with the settings changed Touch [SET] to select the item to change. [SCENE SETUP] Select the scene or date to be played back. [FAVORITE SCENE SETUP] Set up the favorite scenes. [FAVORITE SCENE PLAY] Set up if the favorite scenes are to be included in the Highlight Playback or not.
  • Page 138 ∫ Checking the favorite scenes Touch the scenes to be played back. 0h01m30s 0h01m30s 0h01m30s Touch [Add] and add the favorite part. ≥ Approximately 4 seconds before and after touching [Add] will be added as favorite. ≥ Number of favorite scenes that can be added are 1 to 14. (Number of scenes that can be added differs depending on the ...
  • Page 139: Entering Text

    ∫ Playback time setting Touch the playback time. [APPROX 90 SEC.]/[APPROX 3 MIN.]/[AUTO] ≥ The playback time of [AUTO] is a maximum of approx. 5 minutes. ≥ Playback time may become shorter than the setting, or it may not even be played back if the part recognized as clearly recorded is short.
  • Page 140 Saving the Highlight Playback The scenes put together as a Highlight Playback can be saved as a single scene. The recorded scenes can be saved in the SD card. Stop the playback of the Highlight Playback or wait until the Highlight Playback is finished.
  • Page 141: Manual Edit

    Manual Edit You can join desired AVCHD scenes, scenes recorded as Backup for Twin Camera or parts of these scenes in the order they were recorded to play back or save as a single scene with music added. ≥ Manual Edit cannot be used for MP4/iFrame scenes. Select the menu.
  • Page 142 ∫ To select a scene Touch the scene to be played back. ≥ The scene selection is made as you touch it, and the indication appears on the thumbnail. To cancel the operation, touch the scene again. ≥ When part of a scene has been selected, the indication appears on the thumbnail.
  • Page 143 ∫ To set the music Touch [Music]. Touch the desired sound. ≥ When [NO MUSIC] is selected, the audio recorded at the time of shooting is played back. (To test the music audio) Touch [START]. ≥ Touch the other music option to change the music to be tested. ≥...
  • Page 144: Baby Calendar

    Baby Calendar When a baby’s birthday and name are registered, scenes recorded since the baby’s birthday are displayed as thumbnails for each age in months. ≥ You cannot select scenes recorded as Backup for Twin Camera. ≥ Scenes recorded before the birthday are not displayed. ≥...
  • Page 145 Check the Baby Calendar.    ≥ The name of the registered baby and its age in months are displayed. ≥ You can switch the age in months display by touching MENU : Changes the age in months display to that of the previous month ...
  • Page 146: Changing The Playback Settings And Playing Back The Slide Show

    To change/add a baby’s registered details Touch the name display on the Baby Calendar 100) or select the menu. : [VIDEO SETUP] # [Baby Calendar Setup] MENU Touch the name of the baby whose details are to be changed. ≥ When [Baby 1]/[Baby 2]/[Baby 3] is displayed, the birthday and name or name only are not registered.
  • Page 147 (Only when you would like to change the settings) Touch [SET] to select the item to change. [DATE SETUP]: Select the date to be played back. [SLIDE INTERVAL] Select the interval between still pictures at playback. [EFFECT SETUP] Select the effect for playback. [MUSIC SELECT]: Select the music to be played on playback.
  • Page 148: Playing Back Still Pictures Recorded In Stop Motion Animation Assist Mode As A Slide Show

    Playing back still pictures recorded in Stop Motion Animation Assist Mode as a slide show ≥ For details on recording in Stop Motion Animation Assist Mode, refer to page 60. Touch ≥ The recording group created most recently in Stop Motion Animation Assist Mode is displayed.
  • Page 149: Deleting Scenes/Still Pictures

    Advanced (Playback) Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Press the recording/playback button to switch this unit to the Playback Mode. ∫ To delete the scene or still picture being played back Touch while scenes or still pictures to be deleted are being played back.
  • Page 150 When you stop deleting halfway: Touch [CANCEL] while deleting. ≥ The scenes or still pictures that have already been deleted when the deletion is canceled cannot be restored. To complete editing: Touch [Return]. , selecting [EDIT SCENE] # [DELETE] # [ALL ≥...
  • Page 151: Deleting Part Of A Scene (Avchd/Backup For Twin Camera)

    Deleting part of a scene (AVCHD/Backup for Twin Camera) Unnecessary part of an AVCHD scene or a scene recorded as Backup for Twin Camera can be deleted. The deleted scenes cannot be restored. ≥ Press the recording/playback button to switch this unit to the Playback Mode, and touch the play mode select icon.
  • Page 152: Dividing A Scene (Avchd/Backup For Twin Camera)

    Dividing a scene (AVCHD/Backup for Twin Camera) It is possible to divide an AVCHD scene or a scene recorded as Backup for Twin Camera. Any unwanted parts in the scene can be deleted after dividing. ≥ Press the recording/playback button to switch this unit to the Playback Mode, and touch the play mode select icon.
  • Page 153: Dividing A Scene To Partially Delete (Mp4/Iframe)

    Dividing a scene to partially delete (MP4/iFrame) Divide the MP4/iFrame scenes, and delete unnecessary parts. This divides the recorded scenes in two and deletes the front half or back half. The scenes deleted by dividing cannot be restored. ≥ Press the recording/playback button to switch this unit to the Playback Mode, and touch the play mode select icon.
  • Page 154: Protecting Scenes/Still Pictures

    Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them.) ≥ Press the recording/playback button to switch this unit to the Playback Mode. Select the menu.
  • Page 155: Convert To Mp4

    Advanced (Playback) Convert to MP4 You can convert and copy AVCHD scenes, scenes recorded as Backup for Twin Camera, and MP4 scenes. The image quality will be converted into a format that supports playback on a PC and online sharing (MP4 (1280k720/30p) or MP4 (640k360/30p)). ≥...
  • Page 156: Watching Video/Pictures On Your Tv

    2 Standard images when connecting to video terminal ≥ Check that the plugs are inserted as far as they go. ≥ Always use the supplied HDMI mini cable or a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30: optional). - 112 -...
  • Page 157 Select the video input on the TV. ≥ Example: Select the [HDMI] channel with an HDMI mini cable. Select the [Video 2] channel with a Composite video cable. (The name of the channel may differ depending on the connected TV.) ≥...
  • Page 158: Connecting With An Hdmi Mini Cable

    Mode. aspect setting on the TV. (Refer to the operating instructions of the TV for details.) Refer to the following support site for information about Panasonic TVs with an SD card slot for playing back your pictures. http://panasonic.net/ ≥ It may not be possible to play back scenes on the TV depending on the [REC MODE].
  • Page 159: Playback Using Viera Link

    ≥ VIERA Link™ is a new name for EZ Sync™. ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using an HDMI mini cable (supplied) for automatic linked operations.
  • Page 160 VIERA Link, read the operating instructions for the devices. ≥ Available linked operations between this unit and a Panasonic TV is different depending on the types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating instructions of the TV for the operations that support on the TV.
  • Page 161: Copy/Dubbing

    ≥ Please read the operating instructions of the USB HDD for how to use it. Preparing for copying/playing back Refer to the following support site for information about USB HDD. http://panasonic.jp/support/global/cs/e_cam (This Site is English only) When the USB HDD that requires formatting is connected, a message is displayed. Follow the instructions on the screen to format it.
  • Page 162  A USB Connection Cable (commercially-available) B USB HDD (commercially-available) C Turn the side with the symbol up to connect the micro A end of the USB Connection Cable to the USB terminal of this unit. ≥ Connect this unit to the AC adaptor (When using a desktop HDD) Connect the AC adaptor (supplied with USB HDD) to the USB HDD.
  • Page 163 ≥ Following can be performed by connecting the USB HDD with the scenes and still pictures copied from this unit to other devices. j Save on a PC or rewrite on USB HDD using HD Writer LE 3.1 When the USB HDD is connected to other devices such as Blu-ray disc recorder, a message prompting to format the USB HDD may display.
  • Page 164: Simple Copy

    ∫ Displaying media information The used space of the USB HDD can be checked. ≥ Connect this unit to the USB HDD and touch [Playback HDD] : [SETUP] # [MEDIA STATUS] MENU ≥ If you touch [CHANGE MEDIA], you can switch the display between the SD card and USB HDD. Simple copy Connect this unit to the USB HDD to prepare for copying.
  • Page 165: Playing Back The Usb Hdd

    Playing back the USB HDD ≥ Only motion picture/still picture that have been copied by connecting this unit to the USB HDD or copied with HD Writer LE 3.1 can be played back.  A USB Connection Cable (commercially-available) B USB HDD (commercially-available) C Turn the side with the symbol up to connect the micro A end of the USB Connection Cable to the USB terminal of this unit.
  • Page 166: Dubbing With A Blu-Ray Disc Recorder, Video Device, Etc

    You can dub scenes recorded with this unit to a Panasonic Blu-ray disc recorder or DVD recorder that supports the recording format or recording mode you want to use.
  • Page 167 Dubbing in high-definition picture quality ∫ To dub using equipment with an SD card slot You can dub by directly inserting an SD card. ∫ To dub using equipment with a USB terminal You can dub by connecting a USB cable. ≥...
  • Page 168 Panasonic Blu-ray disc recorder or a DVD recorder. ≥ When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using a USB cable while the unit is turned on, power is also supplied from the connected equipment to this unit.
  • Page 169: Dubbing In Standard Picture Quality

    Dubbing in standard picture quality ∫ Dubbing using equipment without an SD card slot or a USB terminal, or using a video device You can dub by connecting a Composite video cable (commercially-available). ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to.
  • Page 170: Using The Eye-Fi™ Card

    Copy/Dubbing ™ Using the Eye-Fi card Using an Eye-Fi card (commercially-available), you can record motion pictures and still pictures on the card, and save them on a PC or upload them on a file-sharing website via a wireless network. ≥ The functions of the Eye-Fi card (including wireless transmission) are not guaranteed to work on this product.
  • Page 171 ∫ Using Eye-Fi direct mode The files can be transferred directly from the Eye-Fi card to a smartphone without going through the wireless access point when necessary setting is performed in a PC in advance. ≥ Install the software supplied with the Eye-Fi card on your PC, and configure the Eye-Fi direct mode settings.
  • Page 172 ≥ The Eye-Fi menu only appears when an Eye-Fi card is used. ≥ The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due to changes to the card specification etc. ≥ Update the firmware of the Eye-Fi card to the latest one using the software supplied with the Eye-Fi card before use.
  • Page 173: Wi-Fi

    Panasonic will not take any responsibility for any damage that arises when using this unit for any purpose other than as a wireless LAN device.
  • Page 174 ≥ This unit cannot be used to connect to a public wireless LAN connection. ≥ Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless access point. ≥ This unit uses the 2.4 GHz frequency band. You cannot establish a wireless LAN connection using the 5 GHz frequency band.
  • Page 175: [Link To Cell]

    Wi-Fi [Link to Cell] Using a smartphone, you can perform record/playback operations from a remote location or upload motion pictures and still pictures recorded in this unit on SNS (Social Networking Service). A When connecting directly to a smartphone B When connecting to a wireless access point ≥...
  • Page 176: Preparations Before Using [Link To Cell]

    Preparations before using [Link to Cell] Install the smartphone application “Image App” on your smartphone. 158) Setting up a direct Wi-Fi connection between this unit and a smartphone Operate this unit and the smartphone to set up a direct connection. Check the [Direct Connection Password] setting in [Wi-Fi Setup].
  • Page 177: Using [Link To Cell] With A Direct Connection

    Using [Link to Cell] with a direct connection When [Direct Connection Password] is set to [OFF] Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch [Direct Connection]. ≥ This unit will go into connection standby with the smartphone. ≥...
  • Page 178: Using [Link To Cell] With A Wireless Access Point Connection

    When [Direct Connection Password] is set to [ON] ≥ Proceed to Step 5 when your Wi-Fi connection has been made via [Direct Connection] in [Wi-Fi Setup] 165). Press Wi-Fi button on this unit and touch [Link to Cell]. ≥ (If you have touched [Link to Cell] for the first time) A message will be displayed asking whether to connect to a wireless access point.
  • Page 179: About [Link To Cell]

    To exit [Link to Cell]: Touch [EXIT] or press Wi-Fi button. ≥ The message is displayed. Touch [YES] to close the indication. About [Link to Cell] Screen display during remote operations Smartphone screen shots are example displayed in Motion Picture Recording Mode and Playback Mode.
  • Page 180: In Playback Mode

    Functions available for remote operations ∫ In Recording Mode ≥ Recording motion pictures/still pictures ≥ Selecting a mode ≥ Using the zoom (Available in the medium or fast speed) ≥ Switching between the Recording Mode: j Intelligent Auto Mode j Manual Mode j Stop Motion Animation Assist Mode ≥...
  • Page 181: [Baby Monitor]

    Wi-Fi [Baby Monitor] You can use your smartphone to check on your baby being monitored by this unit when you are in another room. The smartphone and this unit can be used like radio transceivers, allowing the users to have a conversation by taking turns. This unit can also send a notification to the smartphone whenever the baby cries.
  • Page 182: Preparations Before Using [Baby Monitor]

    Preparations before using [Baby Monitor] Check if the wireless access point is compatible with IEEE802.11b/g/n. Install the smartphone application “Image App” on your smartphone. 158) Set up a Wi-Fi connection between this unit and the wireless access point. ≥ [WPS Connection] 161) ≥...
  • Page 183 What you can do with [Baby Monitor] ∫ Checking on the baby in your house You can check the image of the baby being monitored on your smartphone. ≥ Images of baby-monitoring cannot be recorded. ≥ It cannot be confirmed with multiple smartphones simultaneously. ∫...
  • Page 184: [Home Cam]

    Wi-Fi [Home Cam] You can confirm the recording screen of this unit from outside using a smartphone. XXXXXXXXX ≥ Switch the Wi-Fi setting to off on your smartphone and use with mobile network such as 3G. ≥ If [CLOCK SET] 21) is not set correctly, [Home Cam] cannot be used.
  • Page 185: Using [Home Cam]

    Using [Home Cam] ≥ Perform the home monitoring operation on the smartphone. 144) ≥ When the firewall is turned on, the Wi-Fi function may not work correctly. If this occurs, check the network settings. When using the home monitor function for the first time ≥...
  • Page 186 ∫ When configuring the home monitor settings using QR code ≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi Setup] (l 161 to 164). Press Wi-Fi button on this unit. Touch [Home Cam] on the Wi-Fi menu screen. Touch [QR code].
  • Page 187: Image Quality

    Image quality The image and sound may be interrupted or the connection may be terminated depending on your line conditions. Use the recommended optimal speed (upstream) below as a guide to make necessary settings. ∫ Recommended optimal speed (upstream) for the broadband line, mobile router (tethering), etc.
  • Page 188 What you can operate/set with a smartphone during home monitoring ≥ Refer to [Help] in the “Image App” menu about how to operate. ∫ What you can operate with a smartphone Confirm the condition inside the house The monitoring video can be confirmed. ≥...
  • Page 189 Changing the home monitor settings of this unit ≥ Setting cannot be performed while operating monitoring with a smartphone. Touch [Setup] and select desired setting. ∫ [Home Monitor Connect] You can display the registration screen for a Device ID and Password. ≥...
  • Page 190: [Dlna Play]

    Wi-Fi [DLNA Play] Connecting this unit to a DLNA-compatible device via Wi-Fi, you can playback scenes and still pictures on the DLNA device. A DLNA-compatible Device ≥ Please read the operating instructions for the TV about connecting TV to the wireless access point.
  • Page 191: Playing Back On A Tv

    Playing back on a TV You can play back the scenes and still pictures recorded with or stored in this unit on a TV. ≥ The following scenes can be played back: j Scenes recorded in AVCHD j Scenes recorded as Backup for Twin Camera j Scenes recorded in MP4/iFrame [720] j Scenes saved in MP4 (1280k720/30p) or MP4 (640k360/30p) ≥...
  • Page 192: [Copy]

    Wi-Fi [Copy] By setting up a Wi-Fi communication between this unit and a PC, you can copy scenes and still pictures recorded with this unit to the PC.  A PC ≥ If [CLOCK SET] 21) is not set correctly, scenes and still pictures may not be able to be copied to a PC.
  • Page 193 Creating a shared folder (destination folder) on the PC To copy scenes and still pictures by setting up a Wi-Fi connection between this unit and the PC, complete the following preparations: j Turn on the PC j Create a shared folder (destination folder) The name of the folder must consist of 15 or less alphanumeric characters.
  • Page 194: Copying To A Pc

    Copying to a PC ≥ Create a shared folder (destination folder) on the PC. 149) ≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi Setup] (l 161 to 164). Press Wi-Fi button on this unit. Touch [Copy] on the Wi-Fi menu screen.
  • Page 195 If you intend to delete the original scenes or still pictures when the copying has finished, always play back the duplicate scenes or still pictures on PC before deletion to confirm that they have been copied normally. ≥ Copying can be performed even when the battery is used for power, but we recommend that the AC adaptor be used.
  • Page 196: [Live Cast]

    Wi-Fi [Live Cast] You can broadcast motion pictures of this unit live by setting up a link between the “LUMIX CLUB” and USTREAM.  A You can also broadcast motion pictures live by connecting this unit and a smartphone that supports tethering.
  • Page 197: Preparations Before Using [Live Cast]

    Use linked services with “LUMIX CLUB” To use the Live Cast, access following website. http://lumixclub.panasonic.net/eng/c/ ≥ Log in to the “LUMIX CLUB” and register/set up the USTREAM on WEB service link setup. Set up a Wi-Fi connection between this unit and the wireless access point.
  • Page 198: Broadcasting Live

    Broadcasting live ≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi Setup] (l 161 to 164). Press Wi-Fi button on this unit. Touch [Live Cast] on the Wi-Fi menu screen. ≥ If a “LUMIX CLUB” Login ID and Password has not been registered to this unit yet, enter them according to the screen.
  • Page 199 ∫ About the screen indications in the Live Cast Mode Live broadcast indication Image quality 156) 1h23m Elapsed time of the live broadcast 10fps Frame rate 156) Number of people watching the live broadcast ≥ Up to 9999 viewers can be indicated. The indication does not appear when the number is 0.
  • Page 200 ∫ To configure the e-mail delivery settings You can make the delivery setting of a broadcast notification e-mail and the setting for the scheduled time and date of the broadcast indicated in the e-mail. Touch [Send E-mail]. Touch [ON] or [OFF]. [ON]: Enables e-mailing.
  • Page 201 ∫ To save in USTREAM Touch [Save in USTREAM]. Touch [ON] or [OFF]. [ON]: Live motion pictures are saved on USTREAM. [OFF]: Select this option not to save on USTREAM. ∫ Broadcasting live with no sound Touch [Microphone On Air]. Touch [OFF].
  • Page 202: Install The "Image App

    131) j [Baby Monitor] 137) j [Home Cam] 140) About the “Image App” The “Image App” is an application provided by Panasonic. For Android apps For iOS apps Android 4.0 or later iOS 7.0 or later Connect your Android Connect your iOS...
  • Page 203: Setting Up A Wi-Fi Connection

    Wi-Fi Setting Up a Wi-Fi Connection To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi. ≥ Depending on the Wi-Fi connection method, available Wi-Fi functions differ. Wi-Fi connection Connecting to a wireless access Setting up a direct connection to a methods point...
  • Page 204: Using The [Wi-Fi Setup Wizard] To Set Up A Connection

    Using the [Wi-Fi Setup Wizard] to set up a connection With the smartphone application “Image App”, you can transfer the following information between the smartphone and this unit. ≥ Set [Direct Connection Password] in [Wi-Fi Setup] to [ON]. 171) (The default setting is [OFF].) ≥...
  • Page 205: Connecting To A Wireless Access Point

    When [Wi-Fi] is selected Turn on the Wi-Fi function in the smartphone’s setup menu. On the smartphone’s Wi-Fi setting screen, select the SSID displayed on this unit. ≥ If this is the first time the smartphone is connecting to this unit via Wi-Fi, enter the Password displayed on this unit’s screen into the smartphone.
  • Page 206: Searching For Wireless Access Points To Set Up A Connection

    Enter a PIN code to set the Wi-Fi connection Touch [PIN code] in Step 6. Touch the wireless access point to be connected. ≥ If you touch [Refresh], you can search for wireless access points again. ≥ If you touch and select a wireless access point, all characters will be displayed.
  • Page 207: Setting Up A Connection Manually

    Touch the wireless access point to connect. ≥ If you touch [Refresh], you can search for wireless access points again. ≥ If you touch and select a wireless access point, all characters will be displayed. In this case, touch [ENTER]. ≥...
  • Page 208 Touch the desired Network Authentication method. Network authentication type Encryption types that can be set [Open] [NONE]/[WEP] [WEP] There is no setup of an encryption types. [WPA-PSK]/[WPA2-PSK] [TKIP]/[AES] ≥ When [WEP] is selected, proceed according to step 9. Touch the desired Encryption method. ≥...
  • Page 209: Setting Up A Direct Connection To A Smartphone

    Setting up a direct connection to a smartphone Check the [Direct Connection Password] setting in [Wi-Fi Setup]. 171) ≥ The default setting is [OFF]. Select [ON] as needed, for example when the setting seems necessary for your Wi-Fi environment. ≥ When [Direct Connection Password] is set to [OFF] j Proceed to the following section, “When [Direct Connection Password] is set to [OFF]”...
  • Page 210: Connecting By Entering An Ssid And Password

    Connecting with QR code Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch [Direct Connection]. Touch [Change connection type]. Touch [QR code]. ≥ QR code is displayed on the screen of this unit. Start up the smartphone application “Image App”. On the smartphone, select [QR code] to scan the QR code displayed on the screen of this unit.
  • Page 211: Connecting From The History

    Connecting from the history Each use of a Wi-Fi function is stored in the Wi-Fi connection history. Connecting from the history allows you to easily set up a connection using the previous connection settings. Press Wi-Fi button on this unit and touch [History]. Touch the desired item to be connected.
  • Page 212 If the Wi-Fi connection cannot be established ≥ Please refer to the operating instruction of the device in use for details about the setting of the wireless access point or smartphone. Problem Check points It cannot connect to the (General) wireless access point.
  • Page 213 Problem Check points The Wi-Fi connection is (Wireless Access Point Connection) not possible between this ≥ Make sure the smartphone is properly connected to the unit and a smartphone. wireless access point by checking the Wi-Fi settings of the smartphone. ≥...
  • Page 214: How To Use The [Wi-Fi Setup] Menu

    Wi-Fi How to Use the [Wi-Fi Setup] Menu Configure various settings necessary to use the Wi-Fi function. When connected to Wi-Fi, the settings cannot be changed. Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch desired menu item. [Wireless Settings] You can add or delete wireless access points, or rearrange the display order of wireless access points.
  • Page 215 37, 172) [Wireless Sub Camera] You can use this unit as a Wireless Sub Camera. For the connection procedure and other details, check the website below. http://panasonic.jp/support/global/cs/e_cam [LUMIX CLUB] Please refer to page 174. [Home Monitor Connect] Please refer to page 145.
  • Page 216 [Menu Password] [Setup]/[Delete] This will set/clear the Password to limit the startup of the Wi-Fi setting menu. By setting the Password, it will prevent erroneous operation, prevent wrongful use of the Wi-Fi function by third party, and protect the set personal information. Touch [Setup].
  • Page 217 [IP Address/DNS Settings] You can change or check your wireless LAN’s network settings, such as the [IP Address], [Subnet Mask] and [MAC Address]. [IP Address]/[Subnet Mask]/[Gateway]/[Primary DNS]/[Secondary DNS]/[MAC Address] ≥ If you touch [AUTO], the network settings are configured automatically. If you touch [MANUAL], you can set each item.
  • Page 218 When different Login IDs are acquired for this unit and the smartphone, change one of the Login ID and Password to the one you like to keep. Refer to the “LUMIX CLUB” site for details. http://lumixclub.panasonic.net/eng/c/ ≥ Connect this unit and a wireless access point in [Wireless Settings]. 161) Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
  • Page 219 ∫ Check or change the acquired Login ID/Password ≥ To change the “LUMIX CLUB” Password on this unit, access the “LUMIX CLUB” website from your smartphone or PC and change the “LUMIX CLUB” Password in advance. Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. Touch [LUMIX CLUB].
  • Page 220 “LUMIX CLUB”. Registering multiple WEB services will send images to all services simultaneously. ≥ Check the “FAQ/Contact us” on the following site for compatible WEB services. http://lumixclub.panasonic.net/eng/c/ Preparation: Make sure that you have created an account on the WEB service you want to use, and have the login information available.
  • Page 221: Wireless Twin/Multi-Camera

    Wireless Twin/Multi-Camera Wireless Twin/Multi-Camera function When this unit and one or more smartphones are connected via Wi-Fi, you can display the image transmitted from the smartphone on this unit’s Sub Window and record it simultaneously with the Main Camera’s image. (Wireless Twin/Multi-Camera) ≥...
  • Page 222 For information on non-smartphone devices that support the Wireless Sub Camera function and the procedures for using them, check the support website below. (As of November 2015) http://panasonic.jp/support/global/cs/e_cam ∫ Wireless Multi-Camera function Connecting multiple smartphones to this unit via Wi-Fi allows you to simultaneously display two Sub Windows and record images in them.
  • Page 223: Notes On The Wireless Twin/Multi-Camera Function

    Notes on the Wireless Twin/Multi-Camera function The performance of the Wireless Twin/Multi-Camera function varies depending on the surrounding radio wave conditions. Since the human body blocks radio waves, it is also influenced by how crowded the area is. ∫ Recording tips ≥...
  • Page 224: Using A Smartphone As A Wireless Sub Camera

    Wireless Twin/Multi-Camera Using a Smartphone as a Wireless Sub Camera ≥ You need to turn on the Wi-Fi function of your smartphone. ≥ Install the smartphone application “Image App” on your smartphone. 158) When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Twin Camera function) ≥...
  • Page 225 Selecting this unit’s SSID on the smartphone to set up a connection (When using the Wi-Fi menu screen) Press Wi-Fi button on this unit and touch [TWIN CAMERA].  A [TWIN CAMERA] B [EXIT] (When using the recording screen) Touch the recording screen on this unit and touch ...
  • Page 226 When [Direct Connection Password] is set to [OFF] On the smartphone’s Wi-Fi setting screen, select the SSID displayed on this unit. ≥ It may take time to complete the Wi-Fi connection. When the Wi-Fi connection is complete, press the home button on the smartphone and start up the smartphone application “Image App”.
  • Page 227 Scanning a QR code to set up a connection ≥ Set [Direct Connection Password] to [ON]. 171) (When using the Wi-Fi menu screen) Press Wi-Fi button on this unit and touch [TWIN CAMERA].  A [TWIN CAMERA] B [EXIT] (When using the recording screen) Touch the recording screen on this unit and touch ...
  • Page 228: When Connecting A Smartphone To This Unit As A Wireless Sub Camera For The First Time (To Use The Wireless Multi-Camera Function)

    When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function) ≥ The default setting for [Direct Connection Password] is [OFF]. ≥ The QR code is not displayed when [Direct Connection Password] 171) is set to [OFF].
  • Page 229 When [Direct Connection Password] is set to [OFF] On the smartphone’s Wi-Fi setting screen, select the SSID displayed on this unit. ≥ It may take time to complete the Wi-Fi connection. When the Wi-Fi connection is complete, press the home button on the smartphone and start up the smartphone application “Image App”.
  • Page 230 When [Direct Connection Password] is set to [ON] Touch [Wi-Fi] on the screen of this unit. On the smartphone’s Wi-Fi setting screen, select the SSID displayed on this unit. ≥ If this is the first time the smartphone is connecting to this unit via Wi-Fi, enter the Password displayed on this unit’s screen on the smartphone.
  • Page 231 Scanning a QR code to set up a connection ≥ Set [Direct Connection Password] to [ON]. 171) Press Wi-Fi button on this unit and touch [Multi Camera].  A [Multi Camera] B [EXIT] Touch [Unregistered] to register the smartphone to be connected. ≥...
  • Page 232: When Connecting For The Second Time Or Later

    ≥ V380 The image being captured by the smartphone connected to this unit will be displayed in a Sub Window of this unit. ≥ If you touch , the registration will be canceled. ≥ You cannot connect devices other than smartphones for the Wireless Multi-Camera function. ≥...
  • Page 233 To use the Wireless Multi-Camera function To use the last connected smartphones Press Wi-Fi button on this unit and touch [Multi Camera]. Touch [ENTER]. Start up the smartphone application “Image App”.  ≥ This unit and the smartphone will be connected via Wi- A [Multi Camera] Fi.
  • Page 234: Terminating The Connection

    Terminating the connection Touch the recording screen on this unit and touch Touch [EXIT] on the screen of this unit. ≥ The Wi-Fi connection will be terminated. ≥ Close the “Image App” on the smartphone. ≥ You can also terminate the connection by pressing the Wi-Fi button on this unit. If you press the Wi-Fi button during recording pause, a message will be displayed.
  • Page 235: Recording With A Wireless Sub Camera

    Wireless Twin/Multi-Camera Recording with a Wireless Sub Camera (Wireless Twin/Multi-Camera) ≥ W580 The Sub Camera of this unit is not available for the Wireless Twin Camera function. ≥ An image recorded with the Main Camera and the Wireless Sub Camera’s image displayed on the Sub Window are recorded as a single scene or still picture*.
  • Page 236 When the Wi-Fi signal weakens If the signal weakens when the Sub Window is displayed, the connection status icon changes to (Weak) and flashes on the Sub Window. If the signal weakens further, the connection status icon changes to and the Sub Window image disappears.
  • Page 237 ∫ Sub Window size when using a Wireless Twin/Multi-Camera The size of the image displayed on the Sub Window varies depending on the smartphone camera and the orientation of the smartphone. Example: Sub Window display when the Main Camera’s aspect ratio is set to 16:9 (The yellow frames correspond to the size of the image be displayed on the Sub Window.) Smartphone orientation Vertical...
  • Page 238: Changing The Wireless Multi-Camera Settings

    Changing the Wireless Multi-Camera settings Changing the display position of the Sub Window Touch Sub Window to be changed. ≥ The selected Sub Window will be highlighted in yellow. Touch the display position you want to change. ≥ Depending on the display position of the Sub Window, the positions of the icons displayed on the screen may change.
  • Page 239 Switching the image in the Sub Window Touch Sub Window to be switched. ≥ The selected Sub Window will be highlighted in yellow. ≥ The Sub Camera select icons will be displayed and the selected icon will be highlighted in yellow. Touch the desired icon to switch the image in the Sub Window.
  • Page 240 Swapping the images between the Sub Windows Touch Sub Window to be swapped. ≥ The selected Sub Window will be highlighted in yellow. ≥ The Sub Camera select icons will be displayed and the selected icon will be highlighted in yellow. Touch the icon selected for the other Sub Window.
  • Page 241 ≥ Recording menu items, operation icons, and functions such as Image Stabilizer, Level Shot Function and [QUICK POWER ON] work only for the Main Camera. ≥ The Fade function’s image effects do not affect the Sub Window. ≥ When the “Image App” screen disappears, image transmission to the Sub Window stops. (The Wi-Fi connection stays connected.) This may occur when, for example, the smartphone receives a call or you press the home button.
  • Page 242: If The Wi-Fi Connection Cannot Be Established (Wireless Twin/Multi-Camera)

    Wireless Twin/Multi-Camera If the Wi-Fi connection cannot be established (Wireless Twin/Multi- Camera) ≥ For information on the setup of your smartphone, refer to its operating instructions. Problem Check points Cannot connect ≥ Check the Wi-Fi settings of the smartphone to see if the SSID of this unit is this unit to the selected so that a Wi-Fi connection will be made from the smartphone to smartphone.
  • Page 243: With A Pc

    Check the website below to download/install the software. ≥ The software is available for download until the end of March 2019. http://panasonic.jp/support/global/cs/soft/download/f_le31.html ≥ Refer to the operating instructions of HD Writer LE 3.1 (PDF file) for details on how to use it.
  • Page 244: Important Notice

    Important Notice ≥ When using an SDXC Memory Card, check the following support site. http://panasonic.net/avc/sdcard/information/SDXC.html ≥ Do not insert a disc recorded in AVCHD format with HD Writer LE 3.1 in a device that does not support the AVCHD format. In some cases the disc may get stuck in the device.
  • Page 245: Before Installing Hd Writer Le 3.1

    Panasonic does not warrant that the operation of the Software will be uninterrupted or error Article 2 Use by a Third Party free. Panasonic or any of its distributors will not Licensee may not use, copy, modify, transfer, be liable for any damage suffered by Licensee rent, lease, lend or allow any third party, arising from or in connection with Licensee’s...
  • Page 246 Article 9 With regard to MICROSOFT SQL SERVER COMPACT 3.5 produced by Microsoft Corporation (1) Licensee shall use the MICROSOFT SQL SERVER COMPACT 3.5 only when included in the Software, and shall not use the MICROSOFT SQL SERVER COMPACT 3.5 in any other configuration or method.
  • Page 247: Operating Environment

    With a PC Operating environment ≥ Even if the system requirements mentioned in this owner’s manual are fulfilled, some PCs cannot be used. ≥ A compatible Blu-ray disc/DVD writer drive and media are necessary for writing to a Blu-ray disc/ DVD.
  • Page 248 ≥ HD Writer LE 3.1 is only for Windows. ≥ Input is not supported in languages other than English, German, French, Simplified Chinese and Russian. ≥ Operation cannot be guaranteed on all Blu-ray disc/DVD drives. ≥ Operation is not guaranteed on Windows 7 Enterprise, Windows 8 Enterprise, Windows 8.1 Enterprise, Windows 10 Enterprise or Windows RT.
  • Page 249: Installation

    Check the website below to download/install the software. ≥ The software is available for download until the end of March 2019. http://panasonic.jp/support/global/cs/soft/download/f_le31.html ∫ Uninstalling HD Writer LE 3.1 Follow the steps below to uninstall any software applications that you no longer require.
  • Page 250: Connecting To A Pc

    ≥ When performing reading/writing between a PC and an SD card, be aware that some SD card slots built into PCs and some SD card readers are not compatible with the SDHC Memory Card or SDXC Memory Card. ≥ When using an SDXC Memory Card, check the following support site. http://panasonic.net/avc/sdcard/information/SDXC.html - 206 -...
  • Page 251 SD card.) ∫ Charging the battery by connecting it to different devices When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc recorder or Panasonic DVD recorder, the battery will charge.
  • Page 252: About The Pc Display

    About the PC display When the unit is connected to a PC, it is recognized as an external drive. ≥ Removable disk (Example: ) is displayed in [Computer]. The following data will be recorded. We recommend using HD Writer LE 3.1 to 1 Up to 999 still pictures in JPEG format copy motion picture data.
  • Page 253: Starting Hd Writer Le 3.1

    ≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to read the PDF operating instructions. Select [Start] # [All Programs] # [Panasonic] # [HD Writer LE 3.1] # [Operating Instructions]. - 209 -...
  • Page 254: If Using Mac (Mass Storage)

    With a PC If using Mac (mass storage) ≥ HD Writer LE 3.1 is not compatible with Mac. ≥ iMovie and Final Cut Pro X supported. For details about iMovie and Final Cut Pro X, please contact Apple Inc. ∫ Operating environment OS X v10.11 Intel Core 2 Duo or better 2 GB or more...
  • Page 255: Indications

    Others Indications W580 ∫ Recording indications Motion Picture Recording Mode Still Picture Recording Mode  0h00m00s 1h30m 1h30m R 3000 R 1h20m MEGA PRE-REC  1/100 OPEN  (White) Card recording possible status (Green) Recognizing the card Intelligent Auto Mode Motion Picture Recording Mode Intelligent Auto Plus Mode Backup for Twin Camera...
  • Page 256 PRE-REC Display Touch Menu PRE-REC Time Lapse Recording Backlight Compensation Tele Macro Zoom Microphone Intelligent Contrast Control Stereo Microphone Wind Noise Canceler Microphone Level Power LCD Fade (White), Fade (Black) Night Mode Image Stabilizer 66)/ Intelligent Exposure Optical Image Stabilizer Lock World Time setting Picture Adjustment Sub Window icon...
  • Page 257 ∫ Playback indications ∫ Indication of connection to Wi-Fi /7/8/9/:/ 1/;/5/ D/E/;1/2; Wi-Fi connection status (wireless access point) 159) Display during playback 28, 85) Wi-Fi connection status (Direct 0h00m00s Playback Time connection) 159) No.10 Scene Number ∫ Indication of connection to Repeat Playback USB HDD Resume Playback...
  • Page 258: Messages

    ≥ Use a battery that is compatible with this unit. If using a Panasonic battery compatible with this unit, remove the battery and then insert it again. If the message appears even after repeating this several times, this unit needs repair.
  • Page 259: About Recovery

    Failed to connect wireless access point/ No wireless access point found ≥ Check the Wi-Fi set up of your wireless access point and smartphone. ≥ [WPS Connection] can establish a connection only between two devices: this unit and a device that will connect to this unit. Check if multiple devices are trying to establish a connection in the WPS waiting state simultaneously.
  • Page 260: Troubleshooting

    Others Troubleshooting ∫ It is not a malfunction in following cases A clicking sound is heard ≥ This is the sound of the lens moving and is not a defect. when the unit is shaken. This sound will no longer be heard when the unit is turned on and set this unit to the Motion Picture Recording Mode or Still Picture Recording Mode.
  • Page 261 Indication Problem Check points Remaining battery ≥ The remaining battery capacity indication is an indication is not displayed approximation. properly. If the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it and then charge it again. Recording Problem Check points...
  • Page 262 Playback Problem Check points Scenes/still pictures ≥ Any scenes/still pictures where the thumbnails are displayed cannot be played back. cannot be played back. Scenes cannot be deleted. ≥ Release the protect setting. 110) ≥ Any scenes/still pictures where the thumbnails are displayed cannot be deleted.
  • Page 263 With other products Problem Check points Cannot copy scenes on ≥ Other equipment might have not recognized the SD card. the SD card by connecting Unplug the USB cable once, and reconnect it. to other equipment with the USB cable. With a PC Problem Check points...
  • Page 264 “LUMIX CLUB” Login ID and registered wireless access points will be deleted. I have forgotten the Login ≥ Check the information in the login screen of “LUMIX CLUB”. ID or Password for the http://lumixclub.panasonic.net/eng/c/ “LUMIX CLUB”. Others Problem Check points If the SD card is inserted in ≥...
  • Page 265 ∫ If AVCHD scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit.
  • Page 266: Cautions For Use

    Others Cautions for use When you use the unit in a sandy or dusty About this unit place such as a beach, do not let sand or fine dust get into the body and terminals of the unit. The unit and the SD card become warm Also, keep the unit away from sea water.
  • Page 267: About The Battery

    Do not use the unit for surveillance About the battery purposes or other business uses. ≥ This unit was designed for consumer The battery used in this unit is a rechargeable intermittent use. It was not intended for lithium-ion battery. It is susceptible to humidity continuous use, or for any industrial or and temperature and the effect increases the commercial application resulting in prolonged...
  • Page 268: About The Ac Adaptor

    Prepare spare batteries when going out for About status indicator during recording. charging ≥ Prepare batteries enough to last for 3 to 4 times the period you are planning to record When the status indicator is flashing at a for. Cold places such as a ski resort can particularly fast or slow rate, the following shorten recording time.
  • Page 269: Lcd Monitor

    About the SD card LCD monitor When disposing of or giving away the SD ≥ When the LCD screen is dirty or card, note that: condensation has occurred, please wipe it ≥ Formatting and deletion of data on this unit or using a soft cloth such as eyeglass cleaner.
  • Page 270 Please note in advance that Panasonic is not liable in any way for any direct or indirect damage from the alteration or vanishing of information or personal information.
  • Page 271: About Copyright

    Licensing, LLC in the United States and other the manufacturers who developed the system countries. ™ or product concerned. ≥ VIERA Link is a trademark of Panasonic Corporation. This product is licensed under the AVC Patent ™ ≥ EZ Sync is a trademark of Panasonic Portfolio License for the personal use of a Corporation.
  • Page 272: Recording Modes/Approximate Recordable Time

    Others Recording modes/approximate recordable time ≥ The stated times are the approximate recordable times for continuous recording.   Recording format [AVCHD] [1080/60i] Recording mode [1080/60p] [PH] [HA] [HG] [HE] Picture size/ 1920k1080/ 1920k1080/ 1920k1080/ 1920k1080/ 1920k1080/ Frame rate 4 GB 19 min 21 min 30 min...
  • Page 273: Approximate Number Of Recordable Pictures

    Others Approximate number of recordable pictures ≥ The stated number is the approximate number of recordable pictures. 0.3M 7.4M 2.1M Picture size 4224k2376 1920k1080 3136k2352 640k480 Aspect ratio [16:9] [4:3] 4 GB 3200 14000 SD card 16 GB 2500 12500 3300 58000 64 GB...
  • Page 274: Optional Accessories

    Others Optional accessories Some optional accessories may not be available in some countries. About the Remote Pan Tilt Cradle If you connect this unit to the Remote Pan Tilt Cradle VW-CTR1 (optional) by USB cable, this unit can automatically track the movement of the subject being recorded. This unit zooms in/out the image automatically, and the Remote Pan Tilt Cradle pans and tilts this unit.
  • Page 275 Touch [Remote Pan Tilt Cradle]. ≥ The Remote Pan Tilt Cradle Mode selection screen is displayed. ≥ If you have touched an item other than [Remote Pan Tilt Cradle] or if the Remote Pan Tilt Cradle is not recognized correctly, reconnect the USB cable. ≥...
  • Page 276 Using the Remote Pan Tilt Cradle ≥ Connecting the Remote Pan Tilt Cradle to this unit. 230) ≥ Set [Panning Angle]/[Tilt Angle]/[Tilt Speed] in advance. 235, 236) Touch the desired Remote Pan Tilt Cradle Mode. Operation of the Mode Description Remote Pan Tilt Cradle The operation is automatic.
  • Page 277 Press the recording start/stop button. (When [Party Scene]/[Moving Object] is selected) ≥ Before recording starts, the Remote Pan Tilt Cradle rotates and returns to its home position. It takes time until recording starts. ≥ The Remote Pan Tilt Cradle operates within the range set in advance. (When [Manual]/[Preset Positions] is selected) ≥...
  • Page 278 ∫ Using Cyclic Mode In this mode, the Remote Pan Tilt Cradle cycles through positions registered to the position buttons in the desired sequence. The default sequence is as follows: [HOME] # [POS1] # [POS2] # [POS3] # [POS4] # [POS5] Touch ≥...
  • Page 279 ≥ The following functions will be set to [OFF]: j Level Shot Function j Optical Image Stabilizer j [SHOOTING GUIDE] ≥ If you experience fatigue, a feeling of discomfort or other symptoms when playing back a scene recorded with the Remote Pan Tilt Cradle, stop the playback. (About [Party Scene]/[Moving Object]) ≥...
  • Page 280 You can update the firmware version of the Remote Pan Tilt Cradle. For the latest update information, check the support website below. (As of November 2015) http://panasonic.jp/support/global/cs/e_cam (This Site is English only) ≥ Before updating this unit, update the Remote Pan Tilt Cradle.
  • Page 281 Panasonic Corporation Web site: http://www.panasonic.com...

This manual is also suitable for:

Hc-v380

Table of Contents