Page 1 User Manual DAP-1360 Wireless N300 Access Point & Router September 2014...
Page 2: Table Of Contents
DAP-1360 Wireless N300 Access Point & Router User Manual Contents Chapter 1. Introduction..........5 Contents and Audience............5 Conventions..............5 Document Structure............5 Chapter 2. Overview..........6 General Information............6 Specifications..............7 Product Appearance............10 Front Panel..............10 Back Panel...............11 Delivery Package............12 Chapter 3. Installation and Connection......13 Before You Begin............13 Connecting to PC............14...
Page 3 DAP-1360 Wireless N300 Access Point & Router User Manual Advanced..............76 DNS..............76 System..............77 Administrator Password...........78 Configuration............79 System Log...............81 Firmware Upgrade............83 Local Update............84 Remote Update............85 System Time..............86 Ping..............87 Traceroute...............88 Telnet..............89 Device mode..............90 Chapter 5. Configuring Device (Router Mode).....91 Monitoring..............91 Click'n'Connect............95 Creating WAN Connection..........97 PPPoE Connection............97...
Page 4 DAP-1360 Wireless N300 Access Point & Router User Manual Wi-Fi..............210 Basic Settings............210 Security Settings............212 MAC Filter..............218 List of Wi-Fi Clients...........220 WPS..............221 Using WPS Function via Web-based Interface......223 Using WPS Function without Web-based Interface......223 WDS..............225 Additional Settings.............227 WMM..............229 Client..............231 Advanced..............235 UPnP IGD..............236 DDNS..............237...
Page 5: Chapter 1. Introduction
Chapter 2 gives an overview of the device's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the DAP-1360 device and configure a PC in order to access its web-based interface. Chapter 4 describes all pages of the web-based interface for the device in the access point mode.
Page 6: Chapter 2. Overview
WPA/WPA2), MAC address filtering, different operation modes (access point, router, client), WPS, WDS, WMM. You are able to connect the wireless access point DAP-1360 switched to the router mode to a cable or DSL modem or to a private Ethernet line and use a high-speed Internet connection to successfully fulfill a wide range of professional tasks.
Page 7: Specifications
DAP-1360 Wireless N300 Access Point & Router Overview User Manual Specifications Hardware WAN Interface 1 10/100BASE-TX Ethernet port for cable or DSL modem or private Ethernet line • LAN Interface 1 10/100BASE-TX Ethernet port • WLAN Interface IEEE 802.11n (up to 300Mbps) IEEE 802.11b/g...
Page 8 DAP-1360 Wireless N300 Access Point & Router Overview User Manual Transmitter Output Power 802.11b (typical at room temperature 25 °C) • The maximum value of the transmitter 17dBm (±1.5dB) at 1, 2, 5.5, 11Mbps ◦ output power depends upon the radio 802.11g (typical at room temperature 25 °C)
Page 9 DAP-1360 Wireless N300 Access Point & Router Overview User Manual Network Functions WAN connection types Dynamic DNS • • PPPoE Static IP routing ◦ • Static IP Remote management ◦ • Dynamic IP Network statistics for each ◦ • interface Static IP + PPPoE ◦...
Page 10: Product Appearance
DAP-1360 Wireless N300 Access Point & Router Overview User Manual Product Appearance Front Panel Figure 1. Front panel view. Mode Description The device is powered on. Solid green The device is powered off. Power No light The device's WLAN is on.
Page 11: Back Panel
DAP-1360 Wireless N300 Access Point & Router Overview User Manual Back Panel Figure 2. Back panel view. Name Description A button to restore the factory default settings and to quickly add wireless devices to the access point's WLAN (the WPS function).
Page 12: Delivery Package
“Quick Installation Guide” (brochure). • The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru, DAP-1360/A/E1 product page, the downloads tab). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
Page 13: Chapter 3. Installation And Connection
Operating System Configuration of the access point DAP-1360 supporting the router mode (hereinafter referred to as “the access point”) is performed via the built-in web-based interface. The web-based interface is available from any operating system that supports a web browser.
Page 14: Connecting To Pc
DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual Connecting to PC PC with Ethernet Adapter 1. Make sure that your PC is powered off. 2. Connect an Ethernet cable between the LAN port located on the back panel of the access point and the Ethernet port of your PC.
Page 15 DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual 3. In the Local Area Connection Properties window, on the General tab, select the Internet Protocol (TCP/IP) line. Click the Properties button. Figure 4. The Local Area Connection Properties window.
Page 16 5. Click the ОК button in the connection properties window. Now you can connect to the web-based interface of DAP-1360 for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.
Page 17: Configuring Ip Address In Os Windows 7
DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual Configuring IP Address in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
Page 18 DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line. Figure 7. The Network and Sharing Center window. Page 18 of 270...
Page 19 DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed. Figure 8. The Network Connections window. Page 19 of 270...
Page 20 DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button. Figure 9. The Local Area Connection Properties window.
Page 21 7. Click the OK button in the connection properties window. Now you can connect to the web-based interface of DAP-1360 for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.
Page 22: Pc With Wi-Fi Adapter
DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual PC with Wi-Fi Adapter 1. Attach the antennas from the delivery package. To do this, remove the antennas from their wrapper, attach them to the relevant connectors on the back panel of the access point, and then screw the antennas in a clockwise direction to the back panel.
Page 23: Configuring Wi-Fi Adapter In Os Windows Xp
DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual Configuring Wi-Fi Adapter in OS Windows XP 1. Click the Start button and proceed to the Control Panel > Network and Internet Connections > Network Connections window. 2. In the Network Connections window, right-click the relevant Wireless Network Connection icon.
Page 24 After that the Wireless Network Connection Status window appears. Now you can connect to the web-based interface of DAP-1360 for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.
Page 25: Configuring Wi-Fi Adapter In Os Windows 7
DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual Configuring Wi-Fi Adapter in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
Page 26 DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual 6. Select the Use the following IP address radio button and enter the value 198.168.0.51 in the IP address field. The Subnet mask field will be filled in automatically.
Page 27 10. Wait for about 20-30 seconds. After the connection is established, the network icon will be displayed as the signal level scale. Now you can connect to the web-based interface of DAP-1360 for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.
Page 28: Connecting To Web-Based Interface
(the default IP address of the access point). Press the Enter key. Figure 17. Connecting to the web-based interface of the DAP-1360 device. If the error “ The page cannot be displayed ” (or “ Unable to display the page ”/“ Could not connect to remote server ”) occurs upon connecting to the web-based interface of the access...
Page 29: Web-Based Interface Structure
DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual Web-based Interface Structure After successful registration the Home / Information page opens. The selected operating mode defines the view of the page and the components of the web-based interface.
Page 30: Access Point Mode
DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual Access Point Mode The Home / Information page displays general information on the access point and its software. Figure 21. The general information page in the access point mode.
Page 31 DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual Also use the menu in the left part of the page to configure the access point. In the Home section you can run the Wireless network settings wizard (for the detailed description of the Wizard, see the Wireless Network Settings Wizard section, page 37).
Page 32: Router Mode
DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual Router Mode The Home / Information page displays general information on the access point and its software. Figure 22. The general information page in the router mode. From the page you can quickly get to some pages of the web-based interface.
Page 33 DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual Also use the menu in the left part of the page to configure the access point. The Monitoring section provides an interactive scheme which illustrates the access point's settings and the LAN structure.
Page 34: Notifications And System Drop-Down Menu
DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual Notifications and System Drop-down Menu The access point's web-based interface displays the notifications in the top right part of the page. Figure 23. The web-based interface notifications. Click the icon displaying the number of notifications to view the complete list and click the relevant link.
Page 35 DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual Control Description Click the icon to reboot the device. All unsaved changes will be lost after the device's reboot. Reboot device Click the icon to save the configuration (all settings of the access point) to your PC.
Page 36: Device Operation Modes
DAP-1360 Wireless N300 Access Point & Router Installation and Connection User Manual Device Operation Modes Access Point Mode In the access point mode, the device is used to create a wireless local area network or to connect to a wired router.
Page 37: Chapter 4. Configuring Device (Access Point Mode)
Access point choice of the Mode radio button. Click the Next button. If you want to configure DAP-1360 as a repeater to connect to a wireless access point, select the Repeater choice of the Mode radio button. Click the Next button.
Page 38: Access Point Mode
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Access Point Mode On the opened page, in the SSID field, specify a new name for the network (use digits and Latin characters). Figure 26. Page for changing the name of the wireless LAN.
Page 39 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual On the next page, you can modify security settings of the WLAN. The default security settings do not provide sufficient protection for the WLAN. Please, specify your own security settings for the WLAN.
Page 40: Repeater Mode
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Repeater Mode On the opened page, click the Search button. Figure 28. The page for selecting a network to connect. Select the network to which you want to connect and click the Next button.
Page 41 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Figure 29. The page for entering the password for connection to the wireless network. If you need a password to connect to the selected network, enter the password in the Network key field and click the Next button.
Page 42 Apply button. After that, the wireless channel of DAP-1360 will switch to the channel of the wireless access point to which you have connected. After clicking the Apply button, the Home / Information page opens.
Page 43: Client Mode
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Client Mode On the opened page, click the Search button. Figure 31. The page for selecting a network to connect. Select the network to which you want to connect and click the Next button.
Page 44 On the next page, the parameters of the network to which you want to connect and the entered password are displayed. Make sure that the specified settings are correct and then click the Apply button. After that, the wireless channel of DAP-1360 will switch to the channel of the wireless access point to which you have connected.
Page 45: Status
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Status The pages of this section display data on the current state of the access point: network statistics • IP addresses leased by the DHCP server •...
Page 46: Dhcp
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual DHCP The Status / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as well as the IP address expiration periods (the lease time).
Page 47: Clients
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Clients On the Status / Clients page, you can view the list of devices connected to the access point devices accessing its web-based interface. Figure 35. The Status / Clients page.
Page 48: Net
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual In this menu you can configure basic parameters of the local area network of the access point. point's local interface, proceed to the Net / LAN page.
Page 49 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Parameter Description An operating mode of the access point's DHCP server. Enable: the access point assigns IP addresses to clients automatically in accordance with the specified parameters. When...
Page 50 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual To create a MAC-IP pair, click the Add button. In the IP field, enter an IP address which will be assigned to the device from the LAN, then in the MAC field, enter the MAC address of this device.
Page 51: Wi-Fi
(It is recommended not to select this checkbox in order to simplify initial configuration of your WLAN.) A name for the WLAN. By default, the value DAP-1360 is SSID specified. It is recommended to specify another name for the network upon initial configuration (use digits and Latin characters).
Page 52 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Parameter Description The wireless channel number. When the auto value is selected, the Channel access point itself chooses the channel with the least interference. Operating mode of the wireless network of the access point. This...
Page 53: Security Settings
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Security Settings On the Wi-Fi / Security settings page, you can modify security settings of the WLAN. Figure 40. The default security settings. By default, the Open network authentication type with no encryption is specified for the WLAN.
Page 54 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Figure 41. Network authentication types supported by the access point. The access point supports the following authentication types: Authentication type Description Open authentication (with WEP encryption for wireless network Open modes not supporting 802.11n devices).
Page 55 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual The WPA , WPA2 , and WPA/WPA2 mixed authentication types require a RADIUS server. When the Open or Shared value is selected, the WEP Encryption settings section is displayed (the section is unavailable for the wireless network operating modes which support the standard 802.11n):...
Page 56 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Parameter Description The checkbox activating WEP encryption. When the checkbox is selected, the Default Key ID field, the Encryption Key WEP as Enable Encryption WEP HEX checkbox, the WEP key length drop-down list, and four Encryption Key WEP fields are displayed on the page.
Page 57 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed value is selected, the WPA Encryption settings section is displayed: Figure 43. The WPA-PSK/WPA2-PSK mixed value is selected from the Network Authentication drop- down list.
Page 58 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the RADIUS settings and WPA Encryption settings sections are available: Figure 44. The WPA/WPA2 mixed value is selected from the Network Authentication drop-down list.
Page 59: Mac Filter
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual MAC Filter On pages of the Wi-Fi / MAC Filter section, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
Page 60 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Figure 46. The page for adding a MAC address. Click the Add button and enter an address in the field displayed. Also you can enter the MAC address of a device connected to the LAN of the access point at the moment.
Page 61: List Of Wi-Fi Clients
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual List of Wi-Fi Clients On the Wi-Fi / List of WiFi clients page, you can view the list of wireless clients connected to the access point. Devices connected to the access point via the WDS function are not displayed in the list.
Page 62: Wps
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual On the Wi-Fi / WPS page, you can enable the function for secure configuration of the WLAN and select a method used to easily add wireless devices to the WLAN.
Page 63 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual To activate the WPS function, select the WPS Enable checkbox and click the Apply button. When the checkbox is selected, the Information and Connection sections are available on the page.
Page 64: Using Wps Function Via Web-Based Interface
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Using WPS Function via Web-based Interface To add a wireless device via the PIN method of the WPS function, follow the next steps: 1. Select the WPS Enable checkbox.
Page 65 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Later you will be able to add wireless devices to the WLAN by pressing the WPS/RESET button of the access point. 1. Select the PBC method in the software of the wireless device that you want to connect to the access point's WLAN.
Page 66: Wds
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual On the Wi-Fi / WDS page, you can enable the WDS function and select a mode of this function. The WDS function allows joining local area networks together via a wireless connection of access points.
Page 67 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual The following fields are available on the page: Parameter Description The WDS function mode. Disable: The function is disabled. Bridge mode: Access points communicate to each other only, WDS Mode wireless devices cannot connect to them.
Page 68: Additional Settings
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Additional Settings On the Wi-Fi / Additional settings page, you can define additional parameters for the WLAN of the access point. Changing parameters presented on this page may negatively affect your WLAN! Figure 50.
Page 69 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Parameter Description TX Power The transmit power (in percentage terms) of the access point. Select the checkbox to disable multicasting for the access point's WLAN. Deselect the checkbox to enable multicasting from WAN...
Page 70: Wmm
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
Page 71 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual For every Access Category the following fields are available: Parameter Description Arbitrary Inter-Frame Space Number. This parameter influences Aifsn time delays for the relevant Access Category. The lower the value, the higher is the Access Category priority.
Page 72: Client
Figure 52. Connecting DAP-1360 in the access point mode as a client. To allow the devices from the LAN of DAP-1360 to obtain the IP addresses from the DHCP server of the remote access point or network, it is necessary to disable the built-in DHCP server of the device.
Page 73 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Figure 53. The page for configuring the client mode. as a client, select the Enable client checkbox. When the checkbox is To configure the access point...
Page 74 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Parameter Description The number of the key (from first to fourth) which will be used for Default Key ID WEP encryption. Encryption Key WEP as Select the checkbox to set a hexadecimal number as a key for encryption.
Page 75 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual After clicking the Apply button, the wireless channel of DAP-1360 will switch to the channel of the wireless access point to which you have connected. If the...
Page 76: Advanced
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Advanced In this menu you can add name servers. On the Advanced / DNS page, you can add DNS servers to the system. Figure 54. The Advanced / DNS page.
Page 77: System
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual System In this menu you can do the following: change the password used to access the access point's settings • save the current settings to the non-volatile memory •...
Page 78: Administrator Password
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Administrator Password On the System / Administrator password page, you can change the password for the administrator account used to access the web-based interface of the...
Page 79: Configuration
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Configuration On the System / Configuration page, you can reboot the device, save the changed settings to the non-volatile memory, restore the factory defaults, backup the current configuration, or restore the access point's configuration from a previously created file.
Page 80 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual The following buttons are available on the page: Control Description Click the button to save settings to the non-volatile memory. Please, save settings every time you change the device's parameters.
Page 81: System Log
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual System Log On the System / System log / Configuration page, you can set the system log options and configure sending the system log to a remote host.
Page 82 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Control Description A port of the host specified in the Server field. By default, the value Port 514 is specified. After specifying the needed parameters, click the Apply button.
Page 83: Firmware Upgrade
To enable the automatic check for firmware updates, in the Remote update section, select the Check for updates automatically checkbox and click the Apply settings button. By default, in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is specified.
Page 84: Local Update
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Local Update Attention! Do not turn off the access point before the firmware upgrade is completed. This may cause the device breakdown. To update the firmware of the...
Page 85: Remote Update
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Remote Update Attention! Do not turn off the access point before the firmware upgrade is completed. This may cause the device breakdown. To update the firmware of the...
Page 86: System Time
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual System Time On the System / System time page, you can manually set the time and date of the access point or configure automatic synchronization of the system time with a time server on the Internet.
Page 87: Ping
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility. The Ping utility sends echo requests to a specified host and receives echo replies.
Page 88: Traceroute
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Traceroute On the System / Traceroute page, you can define the route of data transfer to a host via the traceroute utility. Figure 62. The System / Traceroute page.
Page 89: Telnet
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Telnet On the System / Telnet page, you can enable or disable access to the device settings via TELNET from your LAN. By default, access is enabled.
Page 90: Device Mode
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Access Point Mode) User Manual Device mode On the System / Device mode page, you can change the operating mode of the device. Figure 64. The page for changing the operating mode of the device.
Page 91: Chapter 5. Configuring Device (Router Mode)
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual CHAPTER 5. CONFIGURING DEVICE (ROUTER MODE) Monitoring The page displays an interactive scheme which illustrates the access point's settings and the LAN structure. Figure 65. The Monitoring page.
Page 92 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual The interactive scheme displays the following elements: Control Description The Internet element displays information on the active connection. Place the mouse pointer over the icon to switch to another connection, remove existing connections, or add new ones.
Page 93 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Control Description The Virtual Servers element is designed for redirecting incoming traffic to a specific IP address in the LAN. It displays the total number of rules for redirecting traffic and the number of rules active in this specific LAN.
Page 94 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Control Description The Wireless element displays information on Wi-Fi module operation. To the left, the name of the access point is displayed. You can change it in the editing mode.
Page 95: Click'n'connect
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Click'n'Connect To configure connection to the Internet, click the Click'n'Connect link in the Home section. Figure 66. Configuring connection to the Internet. Connect the Ethernet cable provided by your ISP to the WAN port of the access point.
Page 96 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 67. The page for selecting the connection type. On the opened page, select the needed choice of the radio button and click the Next button. Page 96 of 270...
Page 97: Creating Wan Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Creating WAN Connection PPPoE Connection Figure 68. Configuring PPPoE WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...
Page 98 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 69. Configuring PPPoE WAN connection. The expert settings mode. The Ethernet section. Parameter Description Connection name A name for connection for easier identification. Ethernet The maximum size of units transmitted by the interface.
Page 99 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 70. Configuring PPPoE WAN connection. The expert settings mode. The PPP section. Parameter Description Username A username (login) to access the Internet. Select the checkbox if you don't need to enter a username and Without authorization password to access the Internet.
Page 100 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description This option is used by some ISPs. Contact your ISP to clarify if this PPP IP extension checkbox needs to be enabled. Fill in the field if you want to use a static IP address to access the Static IP Address Internet.
Page 101 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 71. Configuring PPPoE WAN connection. The expert settings mode. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the access point uses an alternate Isolate connection routing table for this connection.
Page 102: Static Ip Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Static IP Connection Figure 72. Configuring Static IP WAN connection. In the Connection name field, specify a name for the connection for easier identification. Fill in the IP Address and Netmask fields.
Page 103 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 73. Configuring Static IP WAN connection. The expert settings mode. The Ethernet section. Parameter Description Connection name A name for connection for easier identification. Ethernet The maximum size of units transmitted by the interface.
Page 104 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 74. Configuring Static IP WAN connection. The expert settings mode. The IP section. Parameter Description IP Address Enter an IP address for this WAN connection. Netmask Enter a subnet mask for this WAN connection.
Page 105 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 75. Configuring Static IP WAN connection. The expert settings mode. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the access point uses an alternate Isolate connection routing table for this connection.
Page 106: Dynamic Ip Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Dynamic IP Connection Figure 76. Configuring Dynamic IP WAN connection. In the Connection name field, specify a name for the connection for easier identification. If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
Page 107 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 77. Configuring Dynamic IP WAN connection. The expert settings mode. The Ethernet section. Parameter Description Connection name A name for connection for easier identification. Ethernet The maximum size of units transmitted by the interface.
Page 108 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 78. Configuring Dynamic IP WAN connection. The expert settings mode. The IP section. Parameter Description Obtain DNS server Select the checkbox to configure automatic assignment of DNS addresses server addresses.
Page 109 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 79. Configuring Dynamic IP WAN connection. The expert settings mode. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the access point uses an alternate Isolate connection routing table for this connection.
Page 110: Static Ip + Pppoe Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Static IP + PPPoE Connection Figure 80. Configuring Static IP + PPPoE WAN connection. Fill in the IP Address and Netmask fields. In the Gateway IP address field, enter the IP address of the gateway used by this WAN connection.
Page 111 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 81. Configuring Static IP + PPPoE WAN connection. The expert settings mode. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
Page 112 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 82. Configuring Static IP + PPPoE WAN connection. The expert settings mode. The IP section. Parameter Description IP Address Enter an IP address for this WAN connection.
Page 113 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 83. Configuring Static IP + PPPoE WAN connection. The expert settings mode. The Miscellaneous section. Parameter Description Miscellaneous Enable RIP Select the checkbox to allow using RIP for this connection.
Page 114 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual If needed, enter the IP addresses of the ISP's local resources. Figure 84. Configuring Static IP + PPPoE WAN connection. Click the Next button to continue. Page 114 of 270...
Page 115 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 85. Configuring Static IP + PPPoE WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...
Page 116 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 86. Configuring Static IP + PPPoE WAN connection. The expert settings mode. The PPP section. Parameter Description Connection name A name for connection for easier identification.
Page 117 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description Select the checkbox if you want the access point to establish connection to the Internet on demand. In the Maximum idle time Dial on demand field, specify a period of inactivity (in seconds) after which the connection should be terminated.
Page 118 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 87. Configuring Static IP + PPPoE WAN connection. The expert settings mode. The Miscellaneous section. Parameter Description Miscellaneous Enable RIP Select the checkbox to allow using RIP for this connection.
Page 119: Dynamic Ip + Pppoe Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Dynamic IP + PPPoE Connection Figure 88. Configuring Dynamic IP + PPPoE WAN connection. If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
Page 120 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 89. Configuring Dynamic IP + PPPoE WAN connection. The expert settings mode. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
Page 121 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 90. Configuring Dynamic IP + PPPoE WAN connection. The expert settings mode. The IP section. Parameter Description Obtain DNS server Select the checkbox to configure automatic assignment of DNS addresses server addresses.
Page 122 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 91. Configuring Dynamic IP + PPPoE WAN connection. The expert settings mode. The Miscellaneous section. Parameter Description Miscellaneous Enable RIP Select the checkbox to allow using RIP for this connection.
Page 123 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 92. Configuring Dynamic IP + PPPoE WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...
Page 124 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 93. Configuring Dynamic IP + PPPoE WAN connection. The expert settings mode. The PPP section. Parameter Description Connection name A name for connection for easier identification.
Page 125 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description Select the checkbox if you want the access point to establish connection to the Internet on demand. In the Maximum idle time Dial on demand field, specify a period of inactivity (in seconds) after which the connection should be terminated.
Page 126 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 94. Configuring Dynamic IP + PPPoE WAN connection. The expert settings mode. The Miscellaneous section. Parameter Description Miscellaneous Enable RIP Select the checkbox to allow using RIP for this connection.
Page 127: Pptp + Static Ip Or L2Tp + Static Ip Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual PPTP + Static IP L2TP + Static IP Connection Figure 95. Configuring PPTP + Static IP WAN connection. Fill in the IP Address and Netmask fields. In the Gateway IP address field, enter the IP address of the gateway used by this WAN connection.
Page 128 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 96. Configuring PPTP + Static IP WAN connection. The expert settings mode. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
Page 129 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 97. Configuring PPTP + Static IP WAN connection. The expert settings mode. The IP section. Parameter Description IP Address Enter an IP address for this WAN connection.
Page 130 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 98. Configuring PPTP + Static IP WAN connection. The expert settings mode. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the access point...
Page 131 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual If needed, enter the IP addresses of the ISP's local resources. Figure 99. Configuring PPTP + Static IP WAN connection. Click the Next button to continue. Page 131 of 270...
Page 132 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 100. Configuring PPTP + Static IP WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...
Page 133 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 101. Configuring PPTP + Static IP WAN connection. The expert settings mode. The VPN section. Parameter Description Connection name A name for connection for easier identification.
Page 134 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description Select a method of MPPE encryption. No encrypt: MPPE encryption is not applied. • MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-bit •...
Page 135 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 102. Configuring PPTP + Static IP WAN connection. The expert settings mode. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the access point...
Page 136: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 103. Configuring PPTP + Dynamic IP WAN connection. If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
Page 137 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 104. Configuring PPTP + Dynamic IP WAN connection. The expert settings mode. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
Page 138 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 105. Configuring PPTP + Dynamic IP WAN connection. The expert settings mode. The IP section. Parameter Description Obtain DNS server Select the checkbox to configure automatic assignment of DNS addresses server addresses.
Page 139 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 106. Configuring PPTP + Dynamic IP WAN connection. The expert settings mode. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the access point...
Page 140 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 107. Configuring PPTP + Dynamic IP WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...
Page 141 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 108. Configuring PPTP + Dynamic IP WAN connection. The expert settings mode. The VPN section. Parameter Description Connection name A name for connection for easier identification.
Page 142 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description Select a method of MPPE encryption. No encrypt: MPPE encryption is not applied. • MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-bit •...
Page 143 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 109. Configuring PPTP + Dynamic IP WAN connection. The expert settings mode. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the access point...
Page 144: Checking Internet Availability
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Checking Internet Availability On the page, you can check the WAN connection you have created. Figure 110. Checking the Internet availability. In the Result section, the status of the WAN connection and possible causes of malfunctions are displayed.
Page 145: Configuring Wireless Connection
Access point choice of the Mode radio button. Click the Next button. If you want to configure DAP-1360 as a repeater to connect to a wireless access point, select the Repeater choice of the Mode radio button. Click the Next button.
Page 146: Access Point Mode
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Access Point Mode On the opened page, in the SSID field, specify a new name for the network (use digits and Latin characters). Figure 112. Changing the name of the wireless LAN.
Page 147 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual On the next page, you can modify security settings of the WLAN. The default security settings do not provide sufficient protection for the WLAN. Please, specify your own security settings for the WLAN.
Page 148: Repeater Mode
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Repeater Mode On the opened page, click the Search button. Figure 114. The page for selecting a network to connect. Select the network to which you want to connect and click the Next button.
Page 149 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 115. The page for entering the password for connection to the wireless network. If you need a password to connect to the selected network, enter the password in the Network key field and click the Next button.
Page 150 Apply button. After that, the wireless channel of DAP-1360 will switch to the channel of the wireless access point to which you have connected. After configuring the device as a repeater, you need to create a WAN connection with relevant parameters for the WiFiClient interface.
Page 151: Client Mode
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Client Mode On the opened page, click the Search button. Figure 117. Selecting a network to connect. Select the network to which you want to connect and click the Next button.
Page 152 On the next page, the parameters of the network to which you want to connect and the entered password are displayed. Make sure that the specified settings are correct and then click the Apply button. After that, the wireless channel of DAP-1360 will switch to the channel of the wireless access point to which you have connected.
Page 153: Wireless Network Settings Wizard
Access point choice of the Mode radio button. Click the Next button. If you want to configure DAP-1360 as a repeater to connect to a wireless access point, select the Repeater choice of the Mode radio button. Click the Next button.
Page 154: Access Point Mode
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Access Point Mode On the opened page, in the SSID field, specify a new name for the network (use digits and Latin characters). Figure 120. Page for changing the name of the wireless LAN.
Page 155 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual On the next page, you can modify security settings of the WLAN. The default security settings do not provide sufficient protection for the WLAN. Please, specify your own security settings for the WLAN.
Page 156: Repeater Mode
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Repeater Mode On the opened page, click the Search button. Figure 122. The page for selecting a network to connect. Select the network to which you want to connect and click the Next button.
Page 157 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 123. The page for entering the password for connection to the wireless network. If you need a password to connect to the selected network, enter the password in the Network key field and click the Next button.
Page 158 Apply button. After that, the wireless channel of DAP-1360 will switch to the channel of the wireless access point to which you have connected. After configuring the device as a repeater, you need to create a WAN connection with relevant parameters for the WiFiClient interface.
Page 159: Client Mode
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Client Mode On the opened page, click the Search button. Figure 125. The page for selecting a network to connect. Select the network to which you want to connect and click the Next button.
Page 160 On the next page, the parameters of the network to which you want to connect and the entered password are displayed. Make sure that the specified settings are correct and then click the Apply button. After that, the wireless channel of DAP-1360 will switch to the channel of the wireless access point to which you have connected.
Page 161: Virtual Server Settings Wizard
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Virtual Server Settings Wizard To create a virtual server for redirecting incoming Internet traffic to a specified IP address in the LAN, click the Virtual server settings wizard link in the Home section.
Page 162 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description A port of the IP address specified in the Private IP field to which traffic is directed from the Public port. Specify the start and the Private port (begin)/ end value for the port range.
Page 163: Status
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Status The pages of this section display data on the current state of the access point switched to the router mode: network statistics • IP addresses leased by the DHCP server •...
Page 164: Dhcp
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual DHCP The Status / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as well as the IP address expiration periods (the lease time).
Page 165: Routing Table
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Routing Table The Status / Routing table page displays the information on routes. The table contains destination IP addresses, gateways, subnet masks, and other data. Figure 130. The Status / Routing table page.
Page 166: Clients
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Clients On the Status / Clients page, you can view the list of devices connected to the access point and devices accessing its web-based interface. Figure 131. The Status / Clients page.
Page 167: Net
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual In this menu you can configure basic parameters of the local area network of the access point and configure connection to the Internet (a WAN connection). On the Net / WAN page, you can create and edit connections used by the access point.
Page 168: Creating Pppoe Wan Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Creating PPPoE WAN Connection To create a connection of the PPPoE type, click the Add button on the Net / WAN page. On the opened page, select the PPPoE value from the Connection Type drop-down list and specify the needed values.
Page 169 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 134. The page for creating a new connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface. A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
Page 170 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 135. The page for creating a new connection. The PPP section. Parameter Description Username A username (login) to access the Internet. Select the checkbox if you don't need to enter a username and Without authorization password to access the Internet.
Page 171 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description This option is used by some ISPs. Contact your ISP to clarify if this PPP IP extension checkbox needs to be enabled. Fill in the field if you want to use a static IP address to access the Static IP Address Internet.
Page 172 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 136. The page for creating a new connection. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the access point uses an alternate Isolate connection routing table for this connection.
Page 173: Creating Static Ip Wan Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Creating Static IP WAN Connection To create a connection of the Static IP type, click the Add button on the Net / WAN page. On the opened page, select the Static IP value from the Connection Type drop-down list and specify the needed values.
Page 174 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 138. The page for creating a new connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface. A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
Page 175 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 139. The page for creating a new connection. The IP section. Parameter Description IP Address Enter an IP address for this WAN connection. Netmask Enter a subnet mask for this WAN connection.
Page 176 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 140. The page for creating a new connection. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the access point uses an alternate Isolate connection routing table for this connection.
Page 177: Creating Dynamic Ip Wan Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Creating Dynamic IP WAN Connection To create a connection of the Dynamic IP type, click the Add button on the Net / WAN page. On the opened page, select the Dynamic IP value from the Connection Type drop-down list and specify the needed values.
Page 178 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 142. The page for creating a new connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface. A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
Page 179 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 143. The page for creating a new connection. The IP section. Parameter Description Obtain DNS server Select the checkbox to configure automatic assignment of DNS addresses server addresses.
Page 180 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 144. The page for creating a new connection. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the access point uses an alternate Isolate connection routing table for this connection.
Page 181: Creating Static Ip + Pppoe Wan Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Creating Static IP + PPPoE WAN Connection To create a connection of the Static IP + PPPoE type, click the Add button on the Net / WAN page.
Page 182 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 146. The page for creating a new connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface. A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
Page 183 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 147. The page for creating a new connection. The IP section. Parameter Description IP Address Enter an IP address for this WAN connection. Netmask Enter a subnet mask for this WAN connection.
Page 184 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 148. The page for creating a new connection. The Miscellaneous section. Parameter Description Miscellaneous Enable RIP Select the checkbox to allow using RIP for this connection.
Page 185 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 149. The page for creating a new connection. The PPP section. Parameter Description Username A username (login) to access the Internet. Select the checkbox if you don't need to enter a username and Without authorization password to access the Internet.
Page 186 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description This option is used by some ISPs. Contact your ISP to clarify if this PPP IP extension checkbox needs to be enabled. Fill in the field if you want to use a static IP address to access the Static IP Address Internet.
Page 187 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 150. The page for creating a new connection. The Miscellaneous section. Parameter Description Miscellaneous Enable RIP Select the checkbox to allow using RIP for this connection.
Page 188: Creating Dynamic Ip + Pppoe Wan Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Creating Dynamic IP + PPPoE WAN Connection To create a connection of the Dynamic IP + PPPoE type, click the Add button on the Net / WAN page.
Page 189 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 152. The page for creating a new connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface. A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
Page 190 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 153. The page for creating a new connection. The IP section. Parameter Description Obtain DNS server Select the checkbox to configure automatic assignment of DNS addresses server addresses.
Page 191 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 154. The page for creating a new connection. The Miscellaneous section. Parameter Description Miscellaneous Enable RIP Select the checkbox to allow using RIP for this connection.
Page 192 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 155. The page for creating a new connection. The PPP section. Parameter Description Username A username (login) to access the Internet. Select the checkbox if you don't need to enter a username and Without authorization password to access the Internet.
Page 193 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description This option is used by some ISPs. Contact your ISP to clarify if this PPP IP extension checkbox needs to be enabled. Fill in the field if you want to use a static IP address to access the Static IP Address Internet.
Page 194 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 156. The page for creating a new connection. The Miscellaneous section. Parameter Description Miscellaneous Enable RIP Select the checkbox to allow using RIP for this connection.
Page 195: Creating Pptp + Static Ip Or L2Tp + Static Ip Wan Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Creating PPTP + Static IP or L2TP + Static IP WAN Connection To create a connection of the PPTP + Static IP or L2TP + Static IP type, click the Add button on the Net / WAN page.
Page 196 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 158. The page for creating a new connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface. A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
Page 197 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 159. The page for creating a new connection. The IP section. Parameter Description IP Address Enter an IP address for this WAN connection. Netmask Enter a subnet mask for this WAN connection.
Page 198 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 160. The page for creating a new connection. The VPN section. Parameter Description Select the checkbox to enable auto-start of the connection upon the Connect automatically boot-up of the access point.
Page 199 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description Select a method of MPPE encryption. No encrypt: MPPE encryption is not applied. • MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-bit •...
Page 200 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description Select the checkbox if you want one WAN IP address to be used for all computers of your LAN. Select the checkbox to enable protection against ARP and DDoS Firewall attacks.
Page 201: Creating Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Wan Connection
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Creating PPTP + Dynamic IP or L2TP + Dynamic IP WAN Connection To create a connection of the PPTP + Dynamic IP or L2TP + Dynamic IP type, click the Add button on the Net / WAN page.
Page 202 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 162. The page for creating a new connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface. A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
Page 203 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 163. The page for creating a new connection. The IP section. Parameter Description Obtain DNS server Select the checkbox to configure automatic assignment of DNS addresses server addresses.
Page 204 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 164. The page for creating a new connection. The VPN section. Parameter Description Select the checkbox to enable auto-start of the connection upon the Connect automatically boot-up of the access point.
Page 205 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description Select a method of MPPE encryption. No encrypt: MPPE encryption is not applied. • MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-bit •...
Page 206 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description Select the checkbox if you want one WAN IP address to be used for all computers of your LAN. Select the checkbox to enable protection against ARP and DDoS Firewall attacks.
Page 207: Lan
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual To configure the access point's local interface, proceed to the Net / LAN page. Figure 165. Basic settings of the local interface. If needed, edit the basic settings of the local interface.
Page 208 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description Select the checkbox so that the devices connected to the access point obtain the address of the access point as the DNS server address. DNS Relay...
Page 209 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Also you can create a MAC-IP pair for a device connected to the access point's LAN at the moment. To do this, select the relevant value from the Known IP/MAC addresses drop-down list (the fields of the section will be filled in automatically).
Page 210: Wi-Fi
(It is recommended not to select this checkbox in order to simplify initial configuration of your WLAN.) A name for the WLAN. By default, the value DAP-1360 is SSID specified. It is recommended to specify another name for the network upon initial configuration (use digits and Latin characters).
Page 211 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description The wireless channel number. When the auto value is selected, the Channel access point itself chooses the channel with the least interference. Operating mode of the wireless network of the access point. This...
Page 212: Security Settings
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Security Settings On the Wi-Fi / Security settings page, you can modify security settings of the WLAN. Figure 169. The default security settings. By default, the Open network authentication type with no encryption is specified for the WLAN.
Page 213 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 170. Network authentication types supported by the access point. The access point supports the following authentication types: Authentication type Description Open authentication (with WEP encryption for wireless network Open modes not supporting 802.11n devices).
Page 214 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual The WPA , WPA2 , and WPA/WPA2 mixed authentication types require a RADIUS server. When the Open or Shared value is selected, the WEP Encryption settings section is displayed (the section is unavailable for the wireless network operating modes which support the standard 802.11n):...
Page 215 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description The checkbox activating WEP encryption. When the checkbox is selected, the Default Key ID field, the Encryption Key WEP as Enable Encryption WEP HEX checkbox, the WEP key length drop-down list, and four Encryption Key WEP fields are displayed on the page.
Page 216 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed value is selected, the WPA Encryption settings section is displayed: Figure 172. The WPA-PSK/WPA2-PSK mixed value is selected from the Network Authentication drop- down list.
Page 217 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the RADIUS settings and WPA Encryption settings sections are available: Figure 173. The WPA/WPA2 mixed value is selected from the Network Authentication drop-down list.
Page 218: Mac Filter
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual MAC Filter On pages of the Wi-Fi / MAC Filter section, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
Page 219 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 175. The page for adding a MAC address. Click the Add button and enter an address in the field displayed. Also you can enter the MAC address of a device connected to the LAN of the access point at the moment.
Page 220: List Of Wi-Fi Clients
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual List of Wi-Fi Clients On the Wi-Fi / List of WiFi clients page, you can view the list of wireless clients connected to the access point. Devices connected to the access point via the WDS function are not displayed in the list.
Page 221: Wps
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual On the Wi-Fi / WPS page, you can enable the function for secure configuration of the WLAN and select a method used to easily add wireless devices to the WLAN.
Page 222 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual To activate the WPS function, select the WPS Enable checkbox and click the Apply button. When the checkbox is selected, the Information and Connection sections are available on the page.
Page 223: Using Wps Function Via Web-Based Interface
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Using WPS Function via Web-based Interface To add a wireless device via the PIN method of the WPS function, follow the next steps: 1. Select the WPS Enable checkbox.
Page 224 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Later you will be able to add wireless devices to the WLAN by pressing the WPS button of the access point. 1. Select the PBC method in the software of the wireless device that you want to connect to the access point's WLAN.
Page 225: Wds
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual On the Wi-Fi / WDS page, you can enable the WDS function and select a mode of this function. The WDS function allows joining local area networks together via a wireless connection of access points.
Page 226 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual The following fields are available on the page: Parameter Description The WDS function mode. Disable: The function is disabled. Bridge mode: Access points communicate to each other only, WDS Mode wireless devices cannot connect to them.
Page 227: Additional Settings
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Additional Settings On the Wi-Fi / Additional settings page, you can define additional parameters for the WLAN of the access point. Changing parameters presented on this page may negatively affect your WLAN! Figure 179.
Page 228 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description TX Power The transmit power (in percentage terms) of the access point. Select the checkbox to disable multicasting for the access point's WLAN. Deselect the checkbox to enable multicasting from WAN...
Page 229: Wmm
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
Page 230 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual For every Access Category the following fields are available: Parameter Description Arbitrary Inter-Frame Space Number. This parameter influences Aifsn time delays for the relevant Access Category. The lower the value, the higher is the Access Category priority.
Page 231: Client
To use the access point as a WISP repeater, you need to configure the same channel of the wireless connection for DAP-1360 and the WISP access point. Other parameters of the wireless network of DAP-1360 do not depend upon the settings of the WISP access point.
Page 232 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 182. The page for configuring the client mode. To configure the access point as a client, select the Enable client checkbox. When the checkbox is selected, the following fields are displayed on the page:...
Page 233 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description The number of the key (from first to fourth) which will be used for Default Key ID WEP encryption. Encryption Key WEP as Select the checkbox to set a hexadecimal number as a key for encryption.
Page 234 Configuring Device (Router Mode) User Manual After clicking the Apply button, the wireless channel of DAP-1360 will switch to the channel of the wireless access point to which you have connected. If the access point is connected to the selected network successfully, the green indicator appears to the right of the network's SSID in the table.
Page 235: Advanced
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Advanced In this menu you can configure advanced settings of the access point switched to the router mode: enable the UPnP IGD protocol • configure a DDNS service •...
Page 236: Upnp Igd
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual UPnP IGD On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The access point uses the UPnP IGD protocol for automatic configuration of its parameters for network applications requiring an incoming connection to the access point.
Page 237: Ddns
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses. Figure 184. The Advanced / DDNS page.
Page 238: Dns
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual On the Advanced / DNS page, you can add DNS servers to the system. Figure 185. The Advanced / DNS page. DNS servers are used to determine the IP address from the name of a server in Intranets or the Internet (as a rule, they are specified by an ISP or assigned by a network administrator).
Page 239: Routing
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Routing On the Advanced / Routing page, you can add static routes (routes for networks that are not connected directly to the device but are available through the interfaces of the device) into the system.
Page 240 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual To edit an existing route, select a needed field in the relevant line of the table, change its value, and click the Apply button. To remove an existing route, select the checkbox located to the left of the relevant line in the table and click the Delete button.
Page 241: Remote Access To Device
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Remote Access to Device On the Advanced / Remote access to device page, you can configure access to the web-based interface of the access point. By default, the access from external networks to the access point is closed.
Page 242: Miscellaneous
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Miscellaneous On the Advanced / Miscellaneous page, you can enable IGMP, SIP, RTSP, and the PPPoE pass through function for the access point. IGMP is used for managing multicast traffic (transferring data to a group of destinations). This protocol allows using network resources for some applications, e.g., for streaming video, more...
Page 243 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual To disable the SIP ALG function, deselect the SIP checkbox and click the Apply button. To enable RTSP, select the RTSP checkbox and click the Apply button. Such a setting allows managing media stream: fast forward streaming audio/video, pause and start it.
Page 244: Firewall
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Firewall In this menu you can configure the firewall of the access point switched to the router mode: add rules for IP filtering • create virtual servers •...
Page 245 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 190. The page for adding a rule for IP filtering. You can specify the following parameters: Parameter Description General Name A name for the rule for easier identification.
Page 246 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Parameter Description The source host/subnet IP address. To choose a device connected to the LAN of the access point at the moment, select the relevant IP address from the drop-down list (the field will be filled in automatically).
Page 247: Virtual Servers
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Virtual Servers On the Firewall / Virtual servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
Page 248 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual You can specify the following parameters: Parameter Description Select a virtual server template from the drop-down list, or select Template Custom to specify all parameters of the new virtual server manually.
Page 249: Dmz
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks. In the access point, the DMZ implements the capability to transfer a request coming to a port of the DSL access point from the external network to a specified host of the internal network.
Page 250: Mac Filter
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual MAC Filter On the Firewall / MAC filter page, you can configure MAC-address-based filtering for computers of the device's LAN. Figure 194. The Firewall / MAC filter page.
Page 251 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual To edit a rule for filtering, select a needed field in the relevant line of the table, change its value, and click the Apply button. To remove a rule for filtering, select the checkbox located to the left of the relevant line in the table and click the Delete button.
Page 252: Control
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Control This menu is designed to create restrictions on access to certain web sites. URL Filter On the pages of the Control / URL filter section, you can specify restrictions on access to certain web sites.
Page 253 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Figure 196. The Control / URL filter / URL addresses page. Click the Add button and enter an address in the field displayed. Then click the Apply button.
Page 254: System
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual System In this menu you can do the following: change the password used to access the access point's settings • save the current settings to the non-volatile memory •...
Page 255: Administrator Password
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Administrator Password On the System / Administrator password page, you can change the password for the administrator account used to access the web-based interface of the access point and to access the device settings via TELNET.
Page 256: Configuration
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Configuration On the System / Configuration page, you can reboot the device, save the changed settings to the non-volatile memory, restore the factory defaults, backup the current configuration, or restore the access point's configuration from a previously created file.
Page 257 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual The following buttons are available on the page: Control Description Click the button to save settings to the non-volatile memory. Please, save settings every time you change the device's parameters.
Page 258: System Log
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual System Log On the System / System log / Configuration page, you can set the system log options and configure sending the system log to a remote host.
Page 259 DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Control Description A port of the host specified in the Server field. By default, the value Port 514 is specified. After specifying the needed parameters, click the Apply button.
Page 260: Firmware Upgrade
Figure 201. The System / Firmware upgrade page. The current version of the access point's firmware is displayed next the D-Link logo in the top left corner of the page. By default, the automatic check for the access point's firmware updates is enabled. If a firmware update is available, a notification will be displayed in the top right corner of the page.
Page 261: Local Update
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Local Update Attention! Do not turn off the access point before the firmware upgrade is completed. This may cause the device breakdown. To update the firmware of the access point locally, follow the next steps: 1.
Page 262: Remote Update
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Remote Update Attention! Do not turn off the access point before the firmware upgrade is completed. This may cause the device breakdown. To update the firmware of the access point remotely, follow the next steps: 1.
Page 263: System Time
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual System Time On the System / System time page, you can manually set the time and date of the access point or configure automatic synchronization of the system time with a time server on the Internet.
Page 264: Ping
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility. The Ping utility sends echo requests to a specified host and receives echo replies.
Page 265: Traceroute
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Traceroute On the System / Traceroute page, you can define the route of data transfer to a host via the traceroute utility. Figure 204. The System / Traceroute page.
Page 266: Telnet
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Telnet On the System / Telnet page, you can enable or disable access to the device settings via TELNET from your LAN. By default, access is enabled.
Page 267: Device Mode
DAP-1360 Wireless N300 Access Point & Router Configuring Device (Router Mode) User Manual Device mode On the System / Device mode page, you can change the operating mode of the device. Figure 206. The page for changing the operating mode of the device.
Page 268: Chapter 6. Operation Guidelines
RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DAP-1360 device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3- 90 feet (1-30 meters).
Page 269: Chapter 7. Abbreviations And Acronyms
DAP-1360 Wireless N300 Access Point & Router Abbreviations and Acronyms User Manual CHAPTER 7. ABBREVIATIONS AND ACRONYMS Access Category Advanced Encryption Standard Address Resolution Protocol BSSID Basic Service Set Identifier Complementary Code Keying Cyclic Redundancy Check DDNS Dynamic Domain Name System...
Page 270 DAP-1360 Wireless N300 Access Point & Router Abbreviations and Acronyms User Manual PPPoE Point-to-point protocol over Ethernet PPTP Point-to-point tunneling protocol Pre-shared key Quality of Service RADIUS Remote Authentication in Dial-In User Service Routing Information Protocol Request To Send RTSP...

D-Link DAP-1360 User Manual

Chapter 1. Introduction

Chapter 2. Overview

Chapter 3. Installation and Connection

Chapter 4. Configuring Device (Access Point Mode)

Chapter 5. Configuring Device (Router Mode)

Chapter 6. Operation Guidelines

Chapter 7. Abbreviations and Acronyms

Quick Links

Related Manuals for D-Link DAP-1360

Summary of Contents for D-Link DAP-1360

Table of Contents