Related Manuals for Makita SK105D
Summary of Contents for Makita SK105D
-
Page 1: Table Of Contents
Overview Technical data Instrument Set-up Operations How to use the adapters and wall mount Message Codes Accuracy Check Care Safety instructions Optional accessories Makita SK105D/SK105GD... -
Page 2: Overview
Overview Ov e r v i e w The Makita SK105D/SK105GD is a self-levelling There are 2 different types available: 1 Window of vertical line cross-line laser. It is a reliable precision laser for any kind of tasks like levelling, plumbing, trans- SK105D (red laser) 2 Window of horizontal line... -
Page 3: Technical Data
0.46 kg Weight with Li-Ion battery 0.67 kg – 0.84 kg Power supply Makita battery cartridge / USB adapter Rated voltage D.C. 10.8 V - 12 Vmax, D.C. in 5 V Dimensions (L x W x H) 112 x 61 x 102 mm (4.41 x 2.40 x 4.01 in) Operating temperature (instrument) -10…+50 °C (+14…+122 °F) - Page 4 Procedure 01/2014, are shown in the table. Some of the battery cartridges listed above may not be available depending on your region of residence. WARNING Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire. Makita SK105D/SK105GD...
-
Page 5: Instrument Set-Up
Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner. Makita SK105D/SK105GD... - Page 6 CAUTION ing and slip it into place. Insert it all the way until it We recommend the Makita LDX1 laser locks in place with a little click. If you can see the Always switch off the tool before installing or receiver.
- Page 7 Instrument Set-up Using the USB adapter (optional) Makita CXT batteries Depending on the conditions of use and the ambient temperature, the indication may dif- fer slightly from the actual capacity. Indicating the remaining battery capacity Only for battery cartridges with the indicator Press the check button (2) on the battery cartridge to indicate the remaining battery capacity.
-
Page 8: Operations
Operations Op e r a t i o n s Switching ON/Set key Brightness reduction If the instrument is locked press laser key 3 times to switch off: Makita SK105D/SK105GD... - Page 9 Operations Functions with unlocked levelling Vertical lines and horizontal lines Horizontal line Vertical line Makita SK105D/SK105GD...
- Page 10 Operations Functions with locked levelling Horizontal line Vertical line Horizontal line tilted Makita SK105D/SK105GD...
-
Page 11: How To Use The Adapters And Wall Mount
Turn the instrument 360° to adjust the vertical line. thread. PRO L-Adapter can not be used when bat- L-adapter can not be used when battery cart- tery cartridge BL1040B or BL1041B is inser- ridge BL1040B or BL1041B is inserted. ted. Makita SK105D/SK105GD... - Page 12 Turn the adjustment knob of the wall mount to loose and fix the slide for fine adjustment of the horizontal line to the desired reference level. The wall mount is a single item and will not be delivered with the L-adapter as shown above. Makita SK105D/SK105GD...
-
Page 13: Message Codes
Levelling lock is activated and Change power supply instrument is at low power Blinks every 5 seconds Lights green Normal, levelling lock is activated Blinks every 5 seconds Blinks green Levelling lock is activated and laser set at reduced brightness Makita SK105D/SK105GD... -
Page 14: Accuracy Check
|(A1 - A2) - (B1 - B2)| <=2 mm (B1). If the difference does not exceed 2 mm, then the instrument is within tolerance. Should your instrument be outside of the spe- cified tolerance, please contact a local dealer or an authorised Makita distributor. Makita SK105D/SK105GD... - Page 15 If the difference does not exceed 2 mm, then the instrument is within tolerance. Should your instrument be outside of the spe- cified tolerance, please contact a local dealer or an authorised Makita distributor. Makita SK105D/SK105GD...
-
Page 16: Care
To clean the magnetic surface you could use compressed air or modelling clay. If the equipment get wet always dry it (max. 70°C/158°F) before repacking it into the case. Makita SK105D/SK105GD... -
Page 17: Safety Instructions
3. Always prevent access to the product by WARNING unauthorised personnel. Makita Line Laser and L-adapter / PRO L-adapter should not be used in the vicinity of pacemaker because of integrated magnets which can affect the function of the pacemaker. - Page 18 12. Use the batteries only with the products (1) Do not touch the terminals with any the battery may cause irritation or burns. specified by Makita. Installing the bat- conductive material. 5. Do not use a battery pack or tool that is...
- Page 19 Care for the environment and take instrument (see Levelling lock). Please use the ori- also void the Makita warranty for the Makita tool them to the collection points provided in accord- ginal case or an equivalent packaging for trans- and charger.
- Page 20 1. Reorient or relocate the receiving antenna 2. Increase the separation between the equipment and the receiver Makita SK105D/SK105GD...
- Page 21 (e.g. binoculars, telescopes) can be hazardous. CAUTION Looking into the laser beam may be hazardous to the eyes. Wavelength SK105D: 635 +/- 5 nm (red) / SK105GD: 525 +/- 5 nm (green) Maximum radiant output power for clas- sification <1 mW Pulse duration 45 - 70 µs...
-
Page 22: Optional Accessories
Op t i o n a l a c c e s s o r i e s CAUTION These accessories or attachments are recom- mended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to per- sons.