Hardware Interrupts; A.5 Hardware Interrupts - Siemens SIMATIC ET 200SP HA Manual
Digital input module di 16xnamur ha 6dl1131-6th00-0ph1
Hide thumbs
Also See for SIMATIC ET 200SP HA:
- System manual (186 pages) ,
- Compact operating instructions (182 pages) ,
- Original instructions manual (165 pages)
Table of Contents
Advertisement
Drivers, parameters, diagnostics messages and address space
A.5 Hardware interrupts
A.5
Hardware interrupts
Hardware interrupts
The DI 16×24VDC HA generates a hardware interrupt for the following events:
● At a rising edge (signal change from 0 to 1)
● At a falling edge (signal change from 1 to 0)
Interrupt OBs are called automatically if an interrupt occurs.
The module channel that triggered the hardware interrupt is recorded in the start information
of the OB40 in the OB40_POINT_ADDR tag. The figure below shows the assignment to the
bits of local data double word 8.
Figure A-4
46
Start information of the organization block
Digital Input Module DI 16xNAMUR HA (6DL1131-6TH00-0PH1)
Manual, 11/2017, A5E39293880-AB
Hide quick links:
Advertisement
Table of Contents
