Table of Contents
Advertisement
22
System Setting
A/V SYNC menu (Adjusting the
audio delay)
You can delay the sound output using this function
when the image is slower than the sound.
1. Press SETUP.
"1 TESTTONE" appears on the display window.
2. Press W/S repeatedly until "4 A/V SYNC"
appears, then press ENTER/SET.
3. Press A/D to adjust the delay between sound
and image.
You can adjust from 0 MS to 300 MS in 10 MS
steps.
3
4. Press
BACK to move to the previous menu.
Press SETUP to exit the setup menu.
,
Note
You may not be able to adjust the delay between
sound and image perfectly using this function.
DOLBY DRC menu
This function allows you to listen to a movie at a
lower volume without losing clarity of sound. You
can compress the dynamic range of the Dolby Digital
audio output.
1. Press SETUP.
"1 TESTTONE" appears on the display window.
2. Press W/S repeatedly until "5 DOLBY DRC"
appears, then press ENTER/SET.
3. Press A/D to set the DRC.
- DOLBY DRC OFF : Deactivates this function.
- DOLBY DRC ON : Activates this function.
4. Press
BACK to move to the previous menu.
Press SETUP to exit the setup menu.
,
Note
Audio dynamic range compression lets you
compress the dynamic range of the soundtrack
based on the dynamic range information
included in the Dolby Digital signal.
LHR846-FE.DVNMLLK_ENG.indd 22
RESET menu
This allows you to initialize settings you have made in
the SETUP menu.
1. Press SETUP.
"1 TESTTONE" appears on the display window.
2. Press W/S repeatedly until "6 RESET" appears,
then press ENTER/SET.
"1 : YES 2 : NO" appears on the display window.
3. Press the numeric 1 to reset the unit to its
original settings.
If you don't want to reset it, press the numeric 2.
4. Press
BACK to move to the previous menu.
Press SETUP to exit the setup menu.
2017-04-06
2:04:01
Hide quick links:
Advertisement
Table of Contents
