Table of Contents
Advertisement
Video Connections (cont.)
1
Connect an optional AUDIO/VIDEO cable from the VIDEO OUT jack on the rear of the VCR to the VIDEO IN jack on
the rear of the TV.
2
Connect another optional audio/video cable from the AUDIO OUT jacks on the rear of the VCR to the AUDIO IN jacks
on the rear of the TV.
◆
If you have a VCR with 21 pin scart jack, connect scart cable to the rear of TV (Option).
3
Press the TV/VIDEO button to select "AV".
◆
As you press the button, TV, AV1, AV2, AV3, S-VIDEO1, and S-VIDEO2 are repeated alternately.
TV ➞ S-VIDEO1 ➞ S-VIDEO2 ➞ AV1 ➞ AV2 ➞ AV3
if connected
4
Playback a tape in the VCR.
(See owner's Manual for VCR)
☛
Self Checkup Function
◆
When all front and rear jack of this TV are disconnected, the video mode changes as
below.
➞
TV
AV3
(When only AV1 Jack is connected)
➞
TV
AV1
☛
TV/Video Selection
◆
Press the TV/VIDEO button repeatedly to select the desired input.
◆
Whenever the TV/VIDEO button is pressed, the mode changes as below.
➞
TV
S-VIDEO1
(when all input jacks are connected)
➣
◆
When video mode is selected and that AV mode has no input picture signal, the
background colour of the TV screen will change to blue regardless of whether the BLUE-
SCREEN function is set.
◆
Teletext displays on screen will not be output at the Monitor output terminal and Scart
output terminal.
◆
AV mode isn't selected when VCR wasn't operating, so you must check VCR status before
selecting AV mode.
➞
S-VIDEO2
➞
➞
AV3
AV2
AV1
ENG
9
- Quick Links:
- Feature
- Video Connections
- Specification
Hide quick links:
Advertisement
Table of Contents
