Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Thank you for choosing this IDK product.
To ensure the best performance of this product, please read this User's Guide fully and carefully
before using it and keep this manual beside this product.
DFS-01UHD / DFS-01HD
IDK Corporation
4K Digital Frame Synchronizer
<Command Reference Guide>
Ver.2.1.0
Advertisement
Chapters
Table of Contents
Related Manuals for IDK DFS-01UHD
Summary of Contents for IDK DFS-01UHD
- Page 1 DFS-01UHD / DFS-01HD <Command Reference Guide> Ver.2.1.0 Thank you for choosing this IDK product. To ensure the best performance of this product, please read this User’s Guide fully and carefully before using it and keep this manual beside this product.
- Page 2 DFS-01UHD / DFS-01HD Command Guide Trademarks The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. All other company and product names mentioned in this manual are either registered trademarks or...
- Page 3 ● Some of the contents in this command guide such as product appearance in diagrams, menu operations, communication commands, and so on may differ from DFS series depending on the version. ● This command guide is subject to change without notice. You can download the latest version from IDK’s website at: http://www.idkav.com...
-
Page 4: Table Of Contents
DFS-01UHD / DFS-01HD Command Guide Table of Contents About this Guide ........................... 5 Communication configuration and Specifications .................. 6 LAN communication ........................6 2.1.1 LAN connector specification ..................... 6 2.1.2 LAN communication specification ..................... 6 2.1.3 Setting up LAN communication....................7 2.1.4... -
Page 5: About This Guide
DFS-01UHD / DFS-01HD Command Guide 1 About this Guide This guide explains communication commands for controlling the “DFS-01UHD” and “DFS-01HD” (hereafter referred to as “DFS”, scan-converter equipped frame synchronizer. ■ You can perform the following operations using communication commands. ・Setting I/O, audio, and EDID. -
Page 6: Communication Configuration And Specifications
DFS-01UHD / DFS-01HD Command Guide 2 Communication configuration and Specifications 2.1 LAN communication 2.1.1 LAN connector specification It supports Auto MDI/MDI-X, which distinguishes/switches straight and cross cables automatically. Pin assignments of LAN connector: Lights in green while link is established. -
Page 7: Setting Up Lan Communication
DFS-01UHD / DFS-01HD Command Guide 2.1.3 Setting up LAN communication (1) Connect the DFS and the control device via a LAN cable. (2) Set up LAN communication as follows: ・Set IP address and subnet mask ・TCP pot number: 1100, 6000 to 6999 【Reference: User’s Guide】... -
Page 8: The Number Of Tcp-Ip Connections
DFS-01UHD / DFS-01HD Command Guide 2.1.4 The number of TCP-IP connections The DFS series can connect up to eight connections (eight ports) simultaneously. If the DFS is controlled from nine or more PCs, they may not be connected to the DFS normally, since the number of connections that can be used is limited. -
Page 9: Command
DFS-01UHD / DFS-01HD Command Guide 3 Command 3.1 Command outline A command consists of “@” (“40” in hexadecimal), 3 one-byte alphabetical characters (upper and lower cases), and parameters (one-byte numbers ). For some commands, several parameters can be specified or no parameter is required. -
Page 10: Command List
DFS-01UHD / DFS-01HD Command Guide 3.2 Command list ■ Error status Command Function Page @ERR Error status ■ Output timing Command Function Page @GOT / @SOT Output resolution @GUM / @SUM Aspect ratio of sink device @GOC / @SOC Output contrast... - Page 11 DFS-01UHD / DFS-01HD Command Guide ■ Videowall setting Command Function Page @GMR / @SMR Size / position ■ Audio Command Function Page @GSL / @SSL Audio output level @GOL Limit status of audio output level @SOL Audio output level @GAM / @SAM...
-
Page 12: Detailed Descriptions
DFS-01UHD / DFS-01HD Command Guide 3.3 Detailed descriptions 3.3.1 Error status @ERR Error status Description Response in case the command is not executed. Response @ERR, error Parameter error: Error status 1 = Erroneous parameter format or value 2 = Undefined command or wrong format 3 = Currently cannot be used. -
Page 13: Output Timing
DFS-01UHD / DFS-01HD Command Guide 3.3.2 Output timing @GOT / @SOT Output resolution Getting Command @GOT Response @GOT, auto, resolution Setting Command @SOT, auto, resolution Response @SOT, auto, resolution Parameter auto: Output resolution mode 0 = Resolution can be specified for the “resolution” parameter below. -
Page 14: Gum / @Sum Aspect Ratio Of Sink Device
DFS-01UHD / DFS-01HD Command Guide @GUM / @SUM Aspect ratio of sink device Getting Command @GUM Response @GUM, aspect Setting Command @SUM, aspect Response @SUM, aspect Parameter aspect: Aspect ratio of sink device 0 = THROUGH [Default], 1 = 4:3,... -
Page 15: Gob / @Sob Output Brightness
DFS-01UHD / DFS-01HD Command Guide @GOB / @SOB Output brightness Getting Command @GOB Response @GOB, bright Setting Command @SOB, bright Response @SOB, bright Parameter bright: Output brightness 80 to 120 [Default] 100 Getting Command @GOB example Response @GOB,110 Description Getting the output brightness. -
Page 16: Gtp / @Stp Test Pattern
DFS-01UHD / DFS-01HD Command Guide @GTP / @STP Test pattern Getting Command @GTP Response @GTP, pattern Setting Command @STP, pattern Response @STP, pattern Parameter pattern: Test pattern 0 = OFF [Default], 1 = COLOR BAR, 2 = 16 STEP GRAY,... -
Page 17: Output Setting
DFS-01UHD / DFS-01HD Command Guide 3.3.3 Output setting @GDM / @SDM Output mode Getting Command @GDM Response @GDM, mode Setting Command @SDM, mode Response @SDM, mode Parameter mode: Output mode 0 = HDMI RGB MODE [Default], 1 = DVI MODE,... -
Page 18: Gen / @Sen Hdcp Output
DFS-01UHD / DFS-01HD Command Guide @GEN / @SEN HDCP output Getting Command @GEN Response @GEN, hdcp Setting Command @SEN, hdcp Response @SEN, hdcp Parameter hdcp: HDCP output 0 = HDCP is encrypted at all times. [Default], 1 = HDCP is encrypted only if input signal is with HDCP... -
Page 19: Gdc / @Sdc Deep Color
DFS-01UHD / DFS-01HD Command Guide @GDC / @SDC Deep Color Getting Command @GDC Response @GDC, color Setting Command @SDC, color Response @SDC, color Parameter color: Color depth 0 = 24 bit / pixel (8 bit / component) [Default], 1 = 30 bit / pixel (10 bit / component) -
Page 20: Input Timing
DFS-01UHD / DFS-01HD Command Guide 3.3.4 Input timing @GPI / @SPI Start position Getting Command @GPI Response @GPI, h_posi, v_posi Setting Command @SPI, h_posi, v_posi Response @SPI, h_posi, v_posi Parameter h_posi: Horizontal start position (Dot) -100 to 100 [Default] 0... -
Page 21: Gap / @Sap Aspect Ratio
DFS-01UHD / DFS-01HD Command Guide @GAP / @SAP Aspect ratio Getting Command @GAP Response @GAP, aspect Setting Command @SAP, aspect Response @SAP, aspect Parameter aspect: Aspect ratio of input signal 0 = AUTO [Default], 1 = FULL, 2 = 4:3,... -
Page 22: Input Contrast
DFS-01UHD / DFS-01HD Command Guide @GIC / @SIC Input contrast Getting Command @GIC Response @GIC, red, green, blue Setting Command @SIC, red, green, blue Response @SIC, red, green, blue Parameter : Input contrast (Red) green : Input contrast (Green) blue... -
Page 23: Ghu / @Shu Hue
DFS-01UHD / DFS-01HD Command Guide @GHU / @SHU Getting Command @GHU Response @GHU, hue Setting Command @SHU, hue Response @SHU, hue Parameter 0 to 359 [Default] 0 Getting Command @GHU example Response @GHU,0 Description Getting the set HUEs. 0°. Getting... -
Page 24: Ggm / @Sgm Gamma
DFS-01UHD / DFS-01HD Command Guide @GGM / @SGM Gamma Getting Command @GGM Response @GGM, gamma Setting Command @SGM, gamma Response @SGM, gamma Parameter gamma 1 = 0.1 to 30 = 3.0 [Default] 10 = 1.0 Getting Command @GGM example Response... - Page 25 DFS-01UHD / DFS-01HD Command Guide All input video settings (cont’d) @GEF / @SEF Parameter gamma 1 = 0.1 to 30 = 3.0 [Default] 10 = 1.0 sharpness -5 to +15 [Default] 0 0 to 359 [Default] 0 saturation 0 to 200 [Default] 100...
-
Page 26: Input Setting
DFS-01UHD / DFS-01HD Command Guide 3.3.5 Input setting @GDT / @SDT No input monitoring interval Getting Command @GDT Response @GDT, time Setting Command @SDT, time Response @SDT, time Parameter time: No input monitoring interval 0 = OFF, 3 = 3 sec. to 15 = 15 sec. [Default] 10 = 10 sec. -
Page 27: Videowall Setting
DFS-01UHD / DFS-01HD Command Guide 3.3.1 Videowall setting @GMR / @SMR Size / position @GMR Getting Command @GMR, h_zoom, v_zoom, h_posi, v_posi Response @SMR, h_zoom, v_zoom, h_posi, v_posi Setting Command @SMR, h_zoom, v_zoom, h_posi, v_posi Response Parameter h_zoom: Horizontal size 200 = 20.0% to 4000 = 400.0% [Default] 1000 (100.0%) -
Page 28: Audio
DFS-01UHD / DFS-01HD Command Guide 3.3.2 Audio @GSL / @SSL Audio output level Getting Command @GSL Response @GSL, level Setting Command @SSL, level Response @SSL, level Parameter level: Audio output level -60 to 10 [Default] 0 Getting Command @GSL example... -
Page 29: Gam / @Sam Audio Output Mute
DFS-01UHD / DFS-01HD Command Guide @GAM / @SAM Audio output mute Getting Command @GAM Response @GAM, mute Setting Command @SAM, mute Response @SAM, mute Parameter mute: Audio output mute 0 = Mute OFF [Default], 1 = Mute ON Getting Command... -
Page 30: Glo / @Slo Lip Sync
DFS-01UHD / DFS-01HD Command Guide @GLO / @SLO Lip sync Getting Command @GLO Response @GLO, frame Setting Command @SLO, frame Response @SLO, frame Parameter frame: Lip sync 0 to 16 [Default] 0 Getting Command @GLO example Response @GLO,0 Description Getting the set lip sync. -
Page 31: Edid Setting
DFS-01UHD / DFS-01HD Command Guide 3.3.3 EDID setting @GED / @SED EDID resolution Getting Command @GED Response @GED, edid Setting Command @SED, edid Response @SED, edid Parameter edid: resolution of EDID 0 = External EDID, 1 = Copied EDID, 2 = 1080p(1920x1080),... -
Page 32: Rme Copying Edid
DFS-01UHD / DFS-01HD Command Guide @RME Copying EDID Setting Command @RME Response @RME － Parameter Setting Command @RME example Response @RME Description Recalling the sink device EDID and saving it as copied EDID. Remarks @GED / @SED EDID resolution @GDI / @SDI... -
Page 33: Gsp / @Ssp Speaker Configuration
DFS-01UHD / DFS-01HD Command Guide @GSP / @SSP Speaker configuration Getting Command @GSP Response @GSP, number Setting Command @SSP, number Response @SSP, number Parameter number: The number of speakers 0 = 2 channels [Default], 1 = 2.1 channels, 2 = 5.1 channels, 3 = 7.1 channels... -
Page 34: Gaf / @Saf Audio Format
DFS-01UHD / DFS-01HD Command Guide @GAF / @SAF Audio format Getting Command @GAF Response @GAF, format_1, frequency_1, format_2, frequency_2, format_3, frequency_3, format_4, frequency_4, format_5, frequency_5, format_6, frequency_6, format_7, frequency_7 Setting Command @SAF, format_1, frequency_1 (, format_2, frequency_2･･･) Response @SAF, format_1, frequency_1 (, format_2, frequency_2･･･) -
Page 35: Lan Communication
DFS-01UHD / DFS-01HD Command Guide 3.3.4 LAN communication @GIP / @SIP IP address Getting Command @GIP Response @GIP, unit_1, unit_2, unit_3, unit_4 Setting Command @SIP, unit_1, unit_2, unit_3, unit_4 Response @SIP, unit_1, unit_2, unit_3, unit_4 Parameter unit_1: Upper bit of the IP address to unit_4: lower bit of the IP address 0 to 255 = 8 bit (Decimal notation) [Default] 192.168.1.199... -
Page 36: Glp / @Slp Tcp Port Number
DFS-01UHD / DFS-01HD Command Guide @GLP / @SLP TCP port number Getting Command @GLP Response @GLP, port, connection Setting Command @SLP, port, connection Response @SLP, port, connection Parameter port: TCP port number 1100, 6000 to 6999 [Default] 1100 connection: 8-connection mode enabled / disabled... -
Page 37: Preset Memory
DFS-01UHD / DFS-01HD Command Guide 3.3.5 Preset memory @RPM Recalling preset memory Setting Command @RPM, preset Response @RPM, preset Parameter preset: The number of preset memory 1 to 16 Setting Command @RPM,3 example Response @RPM,3 Description Loading preset memory 3. -
Page 38: Other Settings
DFS-01UHD / DFS-01HD Command Guide 3.3.6 Other settings @GIS Input signal status Getting Command @GIS, mode Response @GIS, mode, status_1 (, status_2, status_3, status_4) Parameter mode: Status 0 = All statuses of input signals, 1 = Input mode / color depth / HDCP,... -
Page 39: Gos Sink Device Status
DFS-01UHD / DFS-01HD Command Guide Input signal status (Cont’d)) @GIS Getting Command @GIS,0 example Response @GIS,0,H24,1920x1080p 59.94Hz,L-PCM 48kHz,HDCP 1.4 Description Getting all input statuses. Input mode: HDMI mode; Color depth : 24 bit / pixel (8 bit / component); Input resolution / Vertical synchronous frequency: 1080p 59.94 Hz;... -
Page 40: Gst Internal Temperature
DFS-01UHD / DFS-01HD Command Guide @GST Internal temperature @GST Getting Command Response @GST, temp, status Parameter temp: Internal temperature value The value of temperature x 100 e.g.) 38.75℃: 3875 status: Internal temperature status 0 = Normal, 1 = Abnormal Getting... -
Page 41: Glm / @Slm Key Function Lock
DFS-01UHD / DFS-01HD Command Guide @GLM / @SLM Key function lock @GLM Getting Command Response @GLM, lock @SLM, lock Setting Command @SLM, lock Response Parameter lock: Key function lock 0 = Releasing lock [Default], 1 = Locking, 2 = Changing the current setting... - Page 42 DFS-01UHD / DFS-01HD Command Guide User’s Guide (Command Guide) of DFS-01UHD / DFS-01HD Ver.2.1.0 Issued on: 10 August 2018 Headquarters IDK Corporation 7-9-1 Chuo, Yamato-shi, Kanagawa-pref. 242-0021 JAPAN TEL: +81-46-200-0764 FAX: +81-46-200-0765 Email: idk_eng@idk.co.jp URL: http://www.idkav.com IDK America Inc. 72 Grays Bridge Road Suite 1-C, Brookfield, CT 06804 TEL: +1-203-204-2445 Email: sales@idkav.com URL:...