Advertisement
Quick Links
Quick Setup Guide
1
EZ Record
2
Getting Connected
3
DTV Functions
4
Basic Operation
1
EZ Record
This function allows you Initialise and Finalise a disc automatically.
(Refer to page 48 of the Instruction Manual for more information.)
1.
With the unit in Stop mode, press the MENU button.
Press the buttons to select Setup, then press the OK or ► button.
2.
Press the buttons to select Recording, then press the OK or ► button.
3.
Press the buttons to select EZ Record, then press the OK or ► button.
4.
Press the buttons to select On, then press the OK or ► button.
5.
Press the EXIT button to exit the menu.
6.
Insert a disc.
If the disc is new, it is initialised to V mode automatically. (DVD-RW only)
7.
Press the REC button.
2
Getting Connected
Select one of the following three types of connections :
The VHF/UHF RF OUT jack of this product sends only signals received through the antenna.
It does not output audio/video signals.
You must use one of the following connections on this unit.
Antenna + HDD & DVD Recorder + TV
You can connect your HDD & DVD Recorder to the
television using the SCART cable if the appropriate input is
available on the television. You thus:
•
Obtain better quality sound and pictures
•
Simplify the setting up procedure of your HDD & DVD Recorder
Connect the RF cable as shown.
Connect one end of the SCART cable to the AV1 jack
on the rear of the HDD & DVD Recorder. Also use the
Video/Audio Cable to connect AUDIO OUT(R/L)/VIDEO
OUT jacks on the HDD & DVD Recorder to the Audio &
Video jacks on the TV.
•
For the best picture quality, if your TV has Component
video jacks, you can use component cables instead of
the yellow video connector on the Video/Audio cable. If
your TV has a HDMI or DVI jack, you can use the HDMI
or HDMI-DVI cable instead of the yellow video
connector on the Video/Audio cable.
If you have an AV amplifi er
Connect either audio cables from the AUDIO OUT(R/L) jacks on
the HDD & DVD Recorder to the AUDIO IN jacks on your AV
amplifi er, or a digital cable from the DIGITAL AUDIO OUT
(OPTICAL) jack on the HDD & DVD Recorder to the DIGITAL
AUDIO IN jack on your AV amplifi er.
C Samsung Electronics
HDD & DVD RECORDER
DVD-893M/895M/897M
AV amplifier (receiver) ▼
To RF IN
To RF OUT
RF Cable
To ANT INPUT
English-1
Recordable Discs
DVD-RAM/±RW/±R
OR
▲ HDD & DVD Recorder
OR
OR
OR
▲ TV
Advertisement
Related Manuals for Samsung 895M
Summary of Contents for Samsung 895M
- Page 1 DIGITAL AUDIO OUT (OPTICAL) jack on the HDD & DVD Recorder to the DIGITAL AUDIO IN jack on your AV amplifi er. C Samsung Electronics HDD & DVD RECORDER DVD-893M/895M/897M AV amplifier (receiver) ▼...
- Page 2 HDD & DVD Recorder appears on your TV screen. • If you use an HDMI cable to connect a Samsung TV to the HDD & DVD RECORDER, you can operate the recorder using the TV remote control. (This is only available with SAMSUNG TVs that support Anynet+.
-
Page 3: Display Screen
DTV Functions Display Screen After the television channels have been stored, you will see the following picture(banner) each time you switch channels. ◆ Banner Elements 1. Displays the favorite channel. 2. Displays the teletext. 3. Displays the subtitle. 4. Displays the multi audio. ■... -
Page 4: Making A Timer Recording
Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by connecting the HDD & DVD RECORDER to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TVs that support Anynet+.) With the unit in Stop mode, press the MENU button.