Please read this manual first! Dear Customers! Thank you for preferring a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Important safety and environmental instructions This section contains safety • If the power cable is faulty, instructions that will help protect it should be replaced by a from risk of personal injury or qualified person certified by property damage. Failure to follow the manufacturer, after-sales these instructions invalidates the service or similar (preferably an...
Important safety and environmental instructions • If the supply cord is damaged, it • Avoid large flames beneath the m u s t b e r e p l a c e d b y t h e product. Otherwise, particles on manufacturer or its service agent oil filter may ignite and lead to a or a similarly qualified person in...
Page 5
Important safety and environmental instructions • Operate your hood for 15 minutes The hood may stop working during more after the end of cooking or an electrostatic discharge frying in order to remove the smell (e.g.lightning). This involves no risk of damage.
Important safety and environmental instructions 1.1.3 Children's safety • The manufacturer shall not be liable for any damage caused by • Packaging materials are dangerous improper use or handling. to children. Keep packaging materials in a safe place out of reach of children.
Important safety and environmental instructions • WARNING: Failure to fix the screws in concordance with the instructions provided in the manual may lead to electrical hazards. 1.3 Compliance with WEEE Directive and disposing of the waste product This product complies with EU WEEE Directive (2012/19/EU).
Technical specifications of your appliance BRH60CX BRH90CX 600 mm 900 mm Width Depth 500 mm 500 mm Height Min. 710 - Max. 1150 mm Min. 710 - Max. 1150 mm Supply Voltage 220-240V~50 Hz 220-240V~50 Hz Control Electronic Tact Switch with...
Page 9
Technical specifications of your appliance Fig.2 Dimension drawing 9 / EN Hood / User Manual...
Operating your appliance The hood is designed for suction of fumes while preparing meals. The device can be operated in two modes: As extractor: vapors are removed outside the room by means of a venting pipe. The venting pipe is not available with the device and must be purchased separately.
Installing your appliance • Use a rigid PVC pipe with a min. Ø l20 mm to T he ex ha us t a ir mu st not be evacuate fumes outside. discharged into a flue which is used for exhausting fumes from other •...
Installing your appliance Before installation, the following must be done: The installation must be carried out • Check that the dimensions of the purchased very carefully, so as not to scratch product are adapted to the selected target spot. the chimney cover and the hood. •...
Page 13
Installing your appliance [4 x 32mm] x4 [Ø6 x 30mm] x4 13 / EN Hood / User Manual...
Page 14
Installing your appliance [4 x 12mm] x2 [4 x 32mm] x4 [Ø6 x 30mm] x4 14 / EN Hood / User Manual...
Page 15
Installing your appliance [4 x 12mm] x2 15 / EN Hood / User Manual...
Installing your appliance 4.2 Electric connection The mains voltage must correspond to the voltage indicated on the rating plate affixed to the inside of the hood. If the kitchen hood is equipped with a plug, it should be put in a socket connector that meets the requirements of binding regulations and is located in an easily accessible place.
Cleaning and maintenance 5.3 Activated Charcoal Filter Before carrying out any maintenance operations on the appliance, remove the plug from the Replace the charcoal filter every 3 months. wall outlet. The hood should be cleaned with mild cleaning agents, do not use abrasives. Increase the filter cleaning/ Regular maintenance significantly improves the replacement frequency if the hood...
Control of hood operation 6.1 Control of the hood 6.2 Methods of reducing the effect of cooking process on The different control panels are described the environment below. Check the panel model installed on your hood and see the figure indicated in each •...
Solving problems Symptoms Cause Repairing method No symbol is shown on the display, the The touch control is probably Disconnect the hood from the power hood does not respond to pressing the suspended. supply for about 15 sec. and switch it on control fields.
Reserves the right to make any modications • to the equipment or this manual without prior notice. Contact our ocial distributor should you require technical assistance or additional information on our products. www.beko.com VER 1712...