ABB FPBA-01 Quick Installation And Start-Up Manual
Profibus dp adapter module
Hide thumbs
Also See for FPBA-01:
- User manual (141 pages) ,
- User manual (196 pages) ,
- Quick installation and start-up manual (2 pages)
Advertisement
Quick Links
Options for ABB drives, converters and inverters
Quick installation and start-up guide
FPBA-01 PROFIBUS DP adapter module
Safety instructions
WARNING! Obey the safety instructions. If you ignore them, injury or death, or damage to the
equipment can occur. See the user's manual.
Mechanical installation
1. Pull out the lock.
2. Install the module carefully to an option
module slot of the drive. See the drive
hardware manual.
3. Push in the lock.
4. Tighten the screw to torque 0.8 N·m using
a Torx TX10 screwdriver.
WARNING! Do not use excessive force,
or leave the screw too loose. Over-
tightening can damage the screw or
module. A loose screw decreases the EMC
performance, and can even cause an operation
failure.
Electrical installation
Layout of the module
2
1
4
3
1
No.
Description
1
Lock
2
Mounting and grounding screw
3
Bus connector [X1]
4
Diagnostic LEDs
3
4
Advertisement
Related Manuals for ABB FPBA-01
Summary of Contents for ABB FPBA-01
-
Page 1: Safety Instructions
Options for ABB drives, converters and inverters Quick installation and start-up guide FPBA-01 PROFIBUS DP adapter module Safety instructions WARNING! Obey the safety instructions. If you ignore them, injury or death, or damage to the equipment can occur. See the user’s manual. - Page 2 To take the settings into use, validate and refresh the parameters with parameter 51.27 FBA par refresh. Further information See the latest version of FPBA-01 PROFIBUS DP adapter For more information on fieldbus options and protocols module user's manual (3AFE68573271 [English]) in ABB provided by ABB Drives, see the fieldbus library (www.abb.com/drives/documents)