Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. SPECIFICATIONS Model: DVC750L Maximum air volume Normal (1) 1.3 m /min High (2) 1.6 m...
Before use, make sure that this cleaner must Intended use be used by people who have been adequately instructed on the use of this cleaner. The tool is intended for collecting both wet and dry dust. If foam/liquid comes out, switch off The tool is suitable for commercial use, for example in immediately.
Page 4
19. REPLACEMENT PARTS. When servicing, use Under abusive conditions, liquid may be only identical replacement parts. ejected from the battery; avoid contact. If con- tact accidentally occurs, flush with water. If 20. STORE IDLE CLEANER. When not in use, the liquid contacts eyes, additionally seek medical cleaner should be stored indoors.
It will Failure to do so may cause personal injury. also void the Makita warranty for the Makita tool and To install the battery cartridge, open the battery cover charger.
Indicator lamps Remaining capacity Lighted Blinking 75% to 100% 50% to 75% 25% to 50% 0% to 25% Charge the battery. The battery may have malfunctioned. NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity.
Page 7
Indicating the remaining battery capacity ► 1. Switch lever Auto-suction stop during wet suction operation ► 1. Battery indicator 2. Check button Press the check button to indicate the remaining battery WARNING: Do not use for a long time while capacities.
For blowing ASSEMBLY Insert the hose to blower outlet and turn it clockwise until it clicks. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. CAUTION: Always wear dust mask during assembly or maintenance.
When storing the hose, loop it on the tool and fix it with Connecting the tool the hook as illustrated. Optional accessory To connect the tool, connect the end of the hose to the tool's extraction outlet. Depending on the tool, you may need the optional joint 22-38 or the front cuff 24.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should Using as a blower be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. CAUTION: Do not blow out muddy water such Emptying the tank as pool and sand area.
CAUTION: These accessories or attachments dry thoroughly in the shade before use. Never wash the are recommended for use with your Makita tool filter in a washing machine. specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons.