Table of Contents
Advertisement
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC
Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5
independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a
specific computer.
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the PC Adjust Menu icon.
2
Press the Point
the item that you want to adjust and then press the SELECT
button. An adjustment dialog box will appear. Press the
Point
7 8
button to adjust value.
Fine sync
Eliminates flicker from the image displayed. Press the Point
button to adjust value. (From 0 to 31)
Total dots
Adjusts the number of total dots in one horizontal period. Press
the Point
7 8
button and adjust number to match your PC image.
Horizontal
Adjusts horizontal picture position. Press the Point
adjust the position.
Vertical
Adjusts vertical picture position. Press the Point
adjust the position.
Current mode
Press the SELECT button to show H-Freq. and V-Freq. of the
connected computer.
Clamp
Adjusts clamp level. When the image has dark bars, try this
adjustment.
30
7 8
button to move the red frame
d d
button to move the red frame pointer to
PC Adjust Menu
7 8
7 8
button to
button to
7 8
PC Adjust Menu icon
Move the red frame pointer to
an item and press the SELECT
button.
Shows status
(Stored / Free) of the
Selected Mode
selected Mode.
Press the Point 7 8 button to
adjust the value.
Press the SELECT button at
this icon to adjust the other
items.
Current mode
Press the SELECT button at
the Current mode icon to
show the information of the
connected computer.
- Quick Links:
- Connecting to a Computer
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
