Table of Contents
Advertisement
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has five independent memory areas to store those parameters manually adjusted. It allows you to
recall the setting for a specific computer.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the PC Adjust Menu icon.
2
Use the Point
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point
7 8
buttons to adjust the setting value.
Fine sync
Use the Point
7 8
flicker from the image displayed (from 0 to 31).
Total dots
Use the Point
7 8
dots in one horizontal period to match your PC image.
Horizontal
Use the Point
7 8
position.
Vertical
Use the Point
7 8
position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync
freq. of the connected computer.
Clamp
Use the Point
7 8
the image has dark bars, try this adjustment.
32
7 8
buttons to move the red
buttons to move the red frame
ed
buttons to adjust the value, eliminating a
buttons to adjust the number of total
buttons to adjust the horizontal picture
buttons to adjust the vertical picture
buttons to adjust the clamp level. When
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer
to the desired item and
press the SELECT button.
Status (Stored/Free) of the
selected Mode.
Selected Mode
Use the Point
to adjust the value.
Press the SELECT button
here to adjust other items.
Press the SELECT button at
Current mode to show the
information of the connected
computer.
7 8
buttons
Hide quick links:
Advertisement
Table of Contents
