Installation, Operation and Maintenance Manual Field Installed Variable Frequency Drives (VFD’s Important Notice This manual is the property of the owner. Please be sure to leave it with the owner when you leave the job. Use of Symbols This publication includes warnings, cautions and information icons that point out safety related issues or conditions as well as other pertinent information relative to a safe installation, service or maintenance situation�...
If damage occurred during transit, contact the freight carrier immediately and file a damage claim report. ELECTRICAL HAZARD Inspect the unit data plate to verify the VFD is the appropriate one for the application� (Voltage, VFD and Evaporator Motor Only a qualified licensed electrician or...
It should be noted that the inclusion of a variable frequency balanced between phases, but if the level of the unbalance drive (VFD) with an unbalanced power supply may result in becomes excessive it will create problems for not only nuisance tripping and 3rd harmonic currents�...
NEC or applicable local codes� 6. Attach the appropriate size wire to the power block (motor side) and connect them to the terminals on the VFD marked for the Motor (U, V & W) (Refer to Figure 2A or 2B)� INFORMATION Damage to VFD may occur if not correctly wired�...
(Refer to Figure 3) repair or maintenance� Failure to follow all 9. The terminal markings on the VFD can vary from one electrical safety precautions and industry manufacturer to another� Refer to the VFD manufactur accepted practices when exposed to er instructions for the proper terminal connections�...
Installation, Operation and Maintenance Manual Field Installed Variable Frequency Drives (VFD’s Field Provided VFD/Field Installed (Continued) Figure 2A - After VFD Installed Motor w/ Overload Figure 2B - After VFD Installed Motor w/o Overload Subject to change without notice. 120.7-IM (1218)
Damage to VFD may occur if not correctly wired� 7. Attach the appropriate size wire to the line side power block and connect them to the terminals on the VFD marked for Line Voltage (L1, L2, & L3) (Refer to Figure 4A or 4B)�...
Installation, Operation and Maintenance Manual Field Installed Variable Frequency Drives (VFD’s Field Provided VFD/Field Installed (Continued) Figure 4A - After VFD Installed Motor w/ Overload Figure 4B - After VFD Installed Motor w/o Overload Subject to change without notice. 120.7-IM (1218)
Page 11
Installation, Operation and Maintenance Manual Field Installed Variable Frequency Drives (VFD’s NOTES: Subject to change without notice. 120.7-IM (1218)
Engineered to Order LIMITED WARRANTY Authorized Distributor: United CoolAir Units are backed by a 1 year limited warranty on parts and a 5 year limited warranty on the compressor (labor not included). Maintenance items such as filters and belts are excluded under this limited warranty�...