Power Supply; Common Operation - Sanyo MCD-Z260F Instruction Manual
Hide thumbs
Also See for MCD-Z260F:
- Service manual (30 pages) ,
- Service manual (16 pages) ,
- Service manual (27 pages)
Table of Contents
Advertisement
POWER SUPPLY
AC POWER OPERATION
Connect one end of the mains lead to the [AC
INPUT] socket (Fig. 2) on the unit and the other
end to the AC outlet.
NOTES:
-
When the mains lead is connected to the unit.
the installed batteries will be automatically
disconnected.
The FUNCTION switch is mounted on the sec-
ondary side. The unit is not disconnected
from
mains, even switched off.
BAITERY
POWER OPERATION
(Fig. 3)
1,
Open the battery compartment
lid by pushing
down on the tabs.
2.
Install 8 "C" and 4 "AA" size batteries (not sup-
plied). Refer to the polarity diagram on the back
of the unit. Match the (+) and (–) marks on the
diagram to the (+) and (-) marks on the
batteries.
IMPORTANT
NOTES
Tuner memory back-up batteries
If 4 "AA
cell batteries are installed,
the
Tuner memory contents have been set will
be retained even if the power should fail
or the C batteries should run down.
-
When the mains lead is kept plugged into
the outlet (energized state), the consump-
tion of the memory back-up battery power
can be reduced.
3.
Replace the lid.
CAUTION:
WHEN INSTALLING
BAITERIES
To prevent battery electrolyte
leakage, which
may result in injury and damage to the unit or
other objects, observe the following
precau-
tions:
1.
All batteries
must be installed
with the
proper polarity (see diagram on the back
of the unit).
2.
Do not mix new with old or used batteries.
3.
Only use batteries of the same type and
brand,
4.
Remove the batteries when they are not to
be used for a long period time.
CD PLAYER/RADIO
REMOTE
CONTROL
BAITERY
INSTALLATION
(Fig. 4)
1.
Open the battety compartment
lid.
2.
Install 2 "AA size batteries (not supplied)
exactly as shown in the battery compartment.
3.
Close the lid.
Remote
control
range (Fig. 5)
CONTROLS
(Fig. 6)
NOTE:
1.
2.
3.
4.
5.
6.
7.
The buttons on the remote control perform
similar functions
to similarly marked buttons
on the unit.
PLAY/
II
PAUSE. Play/Pause
button
STOP: Stop button
144 SKIP/SEARCH
Di, - TUNING
+: CD
Skip/Search
and Radio Tuning buttons
BAND: Radio band button
MEMORY (CDTW): CD/luner
memory button
PSCAN: Preset scan button
(FM MODE) REPEAT: FM mode/CD
repeat
button
COMMON
OPERATION
Adjusting the volume
Turn [VOLUME].
Adjusting the tone
Turn [TONE].
Bass expander system
Press [BASSXPANDER]
to ON to enhance
the
bass sound.
Stereo headphones
socket
Inserl the miniplug from a pair of headphones
(not
supplied)
into the [PHONES]
socket. When the
headphones
are plugged in, speakers are auto-
matically disconnected.
Advertisement
Table of Contents
