Advertisement
Quick Links
Floor Stand
Operating Instructions
©2016 Sony Corporation
Printed in China
LSPX-PS1
Checking the contents
• Floor stand (1)
Power cord connector
Stand base
Power cord
Poles
• Wall strap (1)
• Wall strap screw (1)
• Warranty (1)
• Operating Instructions (this document) (1)
Use the AC adaptor supplied with the LSPX-P1 projector.
4-582-834-11(1)
Mounting plate
Charge contact
Quick release
• Hex key (1.5 mm) (1)
Assembling
1
Assemble the poles and stand base in order of .
Take care not to pinch the power cord between the poles.
Route the power cord between two rubber feet under the stand base.
Preventing tipping over by securing to the
wall
1
Drive the wall strap screw (supplied) into a solid wall.
Drive the wall strap screw at a height of 70 cm (27
(31
1
/
inches) above the floor.
2
2
From the mounting plate, pass the stand through the larger loop of
the wall strap (supplied).
3
Hook the smaller loop of the wall strap onto the wall strap screw.
/
inches) to 80 cm
5
8
Continued
Advertisement
Related Manuals for Sony LSPX-PS1
Summary of Contents for Sony LSPX-PS1
- Page 1 Floor Stand Operating Instructions Preventing tipping over by securing to the wall ©2016 Sony Corporation Printed in China Drive the wall strap screw (supplied) into a solid wall. Drive the wall strap screw at a height of 70 cm (27...
-
Page 2: Specifications
Sony personnel. • Screw the poles together tightly. If screwed loosely, they may separate causing Adjust the mounting plate angle while supporting the projector with injury or damage to the projector.