Table of Contents
Advertisement
<P=004>
(Continued)
ON/
STAND-BY
1
TRACK
EDIT
Preset tuning
You can store up to 40 stations in memory (40 stations consisting of any combi-
nation of FM and AM stations you like) and recall them at the push of a button.
To enter stations into memory:
1
Perform steps 1 - 5 in the "Tuning" section.
3
2
Press the ENTER button.
3
Within 10 seconds, turn the jog dial to make the preset channel number flash
in the display.
Store the stations in memory, in order, starting with preset channel 1.
2,4
4
Within 10 seconds, press the ENTER button to store that station in the selected
station preset number memory.
If the preset number indicators go out before the station is memorised, repeat
the operation from step 2.
5
Repeat steps 1 - 4 to set other preset stations, or to change a preset station.
When a new station is stored in the selected station preset number memory,
the contents previously memorised will be erased.
To recall a memorised station:
1
Press the TUNER (BAND) button.
2
Press the DIRECT KEY on the remote control or turn the jog dial on the main
unit to recall the preset channel number.
The frequency will appear in the display.
For example, to select 5:
Press the "5" button.
2
ENTER
For example, to select 23:
Y
Press the
10 button.
Within 5 seconds, press the "2" button.
Within 5 seconds, press the "3" button.
2
To erase all memorised stations:
1
When the unit is in the stand-by mode, hold and press the TRACK EDIT and
ENTER buttons, and then press the ON/STAND-BY button.
All of the memorised stations will be erased.
13
MD-X60H(SUK) TINSE0227AWZZ
Advertisement
Table of Contents
