Related Manuals for Sony FD Trinitron WEGA KV-XJ29
Summary of Contents for Sony FD Trinitron WEGA KV-XJ29
- Page 1 Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-XJ29 © 2002 Sony Corporation 4-088-152-11 (1)
- Page 2 WARNING • Dangerously high voltages are present inside the TV. • Operate the TV only between 110 - 240 V AC. For your own safety, do not touch any part of the TV, the power cord and the antenna cable during lightning storms.
-
Page 3: Table Of Contents
Table of Contents Using Your New TV Getting Started ... 4 Step 1: Connect the antenna ... 4 Step 2: Insert the batteries into the remote ... 5 Step 3: Preset the channels automatically ... 5 Connecting optional components ... 6 Securing the TV ... -
Page 4: Using Your New Tv
Using Your New TV Getting Started Step 1 Connect the antenna If you wish to connect a VCR, see the Connecting a VCR diagram below. Antenna cable (not supplied) IEC connector (not supplied) Antenna cable (not supplied) Connecting a VCR To watch the video input, press t (see page 13). -
Page 5: Step 2: Insert The Batteries Into The Remote
Notes • If you connect a monaural VCR, connect the yellow plug to jack) and the black plug to -L (MONO) (the white jack). • If you connect a VCR to the 8 (antenna input) terminal, preset the signal output from the VCR to the program number 0 on the TV. •... -
Page 6: Connecting Optional Components
Connecting optional components You can connect optional audio/video components, such as a VCR, multi disc player, camcorder, video game or stereo system. To watch the video input of the connected equipment, press t (see page 13). Connecting a camcorder/video game equipment using the t (video input) jacks Front of TV Notes... - Page 7 Connecting a DVD player using the input) jacks 1 Connect R and L under AUDIO R and L output connectors on your DVD player. 2 Using a component video cable, connect Y, C input) on your TV to the COMPONENT VIDEO OUT Y, C connectors on your DVD player.
-
Page 8: Securing The Tv
Securing the TV To prevent the TV from falling, secure the TV using one of the following methods: With the supplied screws, attach the band to the TV stand and to the rear of the TV using the provided hole. Put the cord or chain through the clamps to secure the TV against a wall or pillar. -
Page 9: Presetting Channels
Presetting channels You can preset up to 100 TV channels in numerical sequence from program number 1 using the remote and the buttons on your TV as well. AUTO PROGR Presetting channels automatically Press ! to turn on the TV. Press AUTO PROGR. -
Page 10: Presetting Channels Manually
Presetting channels (continued) Presetting channels manually Press SELECT until “MANUAL PROGRAM” appears. Press + or – to enter the “MANUAL PROGRAM” mode. Press PROGR +/– or the number buttons until the desired program number appears. Press + or – until the desired channel picture appears. - Page 11 To change the color system setting If the color is abnormal when receiving programs through the 8 (antenna input) terminal or the t (video input) jack. (1) Press SELECT until “COLOR SYS” appears. (2) Press + or – to select the appropriate color system until the color is optimal.
-
Page 12: Watching The Tv
Watching the TV This section explains functions used while watching the TV. Most operations can be done using the remote. Press ! to turn on the TV. When the TV is in the standby mode (the 1 indicator on the TV is lit red), press ?/1 on the remote or PROGR +/–... - Page 13 Additional tasks Turn off temporarily Turn off completely Mute the sound Watch the video input (VCR, camcorder, etc.) Jump back to the previous program number Display the on-screen information* Adjust the volume of all program numbers automatically Adjust the picture position when it is not aligned to the TV screen * The picture, sound, and either the program number or video input are displayed.
-
Page 14: Setting The Sleep Timer
Watching the TV (continued) Setting the Wake Up timer Press until the desired period of time appears. The Wake Up timer starts immediately after you have set it. Select the program number or video input you want to display when you wake up. -
Page 15: Advanced Operations
Advanced Operations Customizing the picture and sound You can customize the picture and sound by selecting the picture and sound modes or by adjusting its settings. You can change the sound effect by selecting the surround mode. Selecting the picture and sound modes To select the picture mode Press PIC MODE repeatedly until you get... - Page 16 Customizing the picture and sound (continued) Adjusting the picture and sound settings Press SELECT until the desired setting appears. Each time you press SELECT, the setting item will change as follows: Press + or – to adjust the item. To adjust other items, repeat steps 1 to 2. * “HUE”...
- Page 17 Selecting the surround mode Press SELECT repeatedly until “SURROUND” appears. Press + or – to select the desired surround sound. Select “MOVIE” listen to sound that spreads out over a large area, giving the feeling of being at a movie theatre. “MUSIC”...
-
Page 18: Viewing Your Favorite Channels
Viewing your favorite channels You can display six of your favorite channels for quick and easy selection. You can program the favorite channel as well. Selecting a favorite channel Press FAVORITE. Press the number button from 1 to 6 to select the desired favorite channel. -
Page 19: Blocking The Channels (Child Lock)
Blocking the channels (CHILD LOCK) You can lock some program numbers to prevent children from watching certain channels, by using the buttons on the remote control. Select the program number you want to lock. Press SELECT until “CHILD LOCK” appears on the screen. -
Page 20: Additional Information
Count the number of times the 1 indicator flashes. Press ! (main power) to turn off your TV. Inform your nearest Sony service center about the number of times the 1 indicator flashes. Be sure to note the model name and serial number located on the rear of your TV. -
Page 21: Troubleshooting
Troubleshooting If you find any problem while viewing your TV, please check the following guide. If any problem persists, contact your Sony dealer . Symptom Possible cause Snowy picture • Connection is loose or the cable is damaged. • Channel presetting is inappropriate or incomplete. - Page 22 • Do not use a hair dryer or other equipment near the TV. • Adjust the antenna direction for minimum interference. Contact a Sony dealer for advice. • Use a highly directional antenna. • Use the fine tuning (FINE) function.
- Page 23 • Press SELECT until “PIC ROTATION” appears on the screen, then press + or – to adjust the picture position until it is optimal. • Use the fine tuning (FINE) function. • Contact your nearest Sony service center. — — Additional Information Page –...
-
Page 24: Overview Of Controls
Overview of controls TV front panel (MONO) SELECT Button AUTO PROGR SELECT PROGR +/– 2 +/– Additional Information PROGR AUTO PROGR Function Preset channels automatically. Select the desired item. Select program number. Turn off or turn on the TV. Adjust volume. Standby indicator. -
Page 25: Remote Control
Remote Control -/-- JUMP SOUND PROGR MODE FAVORITE The names/symbols of buttons on the remote are indicated in different colors to represent the available functions. Label color Button function White For general TV operations For Teletext Green operations Button SELECT Select the desired item. -
Page 26: Specifications
Tube size (cm) Screen size (cm) Dimensions (w/h/d, mm) Mass (kg) Design and specifications are subject to change without notice. Sony Corporation Additional Information KV-XJ29M80 KV-XJ29M50 110 - 240 V AC, 50/60 Hz Indicated on the rear of the TV B/G, I, D/K, M PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43...