Table of Contents
Advertisement
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
ACTIVE STANDBY
?/1
1
Press ?/1 to turn on the
receiver.
2
Hold down ?/1 for 5 seconds.
"CLEARED" appears.
All the settings you have changed or
adjusted are reset to the initial settings.
22
GB
Insert two R6 (size-AA) batteries in the
RM-AAU058 Remote Commander.
Observe the correct polarity when installing
batteries.
MASTER VOLUME
INPUT SELECTOR
Notes
• Do not leave the remote in an extremely hot or
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of
• Do not expose the remote sensor to direct sunlight
• If you do not intend to use the remote for an
• When you replace the batteries, the remote buttons
• When the remote no longer operates the receiver,
Inserting batteries into the
remote
humid place.
batteries.
or lighting apparatuses. Doing so may cause a
malfunction.
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
may be reset to their factory settings. If this
happens, reassign the buttons again (page 51).
replace all the batteries with new ones.
Hide quick links:
Advertisement
Table of Contents
