About The Indications In The Display - Sony STR-DA1ES Operating Instructions Manual
Hi-fi receivers: fm stereo/fm-am receiver
Hide thumbs
Also See for STR-DA1ES:
- Limited warranty (1 page) ,
- Service manual (86 pages) ,
- Operating instructions manual (84 pages)
Table of Contents
Advertisement
About the indications in the display
1
2 3
4
a
SLEEP
DIGITAL
SW
SP. OFF
OPT
L
C
R
L F E
qd
SL S SR
qg
qf
1 SW: Lights up when sub woofer selection is
set to "YES" and the receiver detects that the
disc being played back does not contain the
LFE channel signal. While this indicator
lights up, the receiver creates a sub woofer
signal based on the low frequency
components of the front channels.
2 SLEEP: Lights up when sleep timer is
activated.
3 SP.OFF.: Lights up when the headphones are
inserted or the SPEAKERS ON/OFF is set to
OFF.
4 ; DIGITAL: Lights up when the receiver is
decoding signals recorded in the Dolby
Digital format.
5 PRO LOGIC: Lights up when the receiver
applies Pro Logic processing to 2 channel
signals in order to output the center and
surround channel signals. However, this
indicator also lights when the Pro Logic II
movie/music decoder is in active. However,
this indicator does not light if the center and
surround speakers are set to "NO".
6 DTS: Lights up when DTS signals are input.
When playing a DTS format disc, be sure that
you have made digital connections and that
INPUT MODE is NOT set to ANALOG (see
page 37).
5
6
DTS MPEG STEREO
PRO LOGIC
COAX MULTI CH IN
qs
qa
7
MONO RDS
D.RANGE EQ
0
9
7 MPEG: Lights up when MPEG signals are
input.
Note
Only the front 2 channels are compatible with
MPEG format. Multi channel surround sound is
downmixed and output from the front 2 channels.
8 Tuner indicators: Light up when using the
receiver to tune in radio stations, etc. See
pages 25–29 for tuner operations.
9 EQ: Lights up when the equalizer is
functioning.
0 D.RANGE: Lights up when dynamic range
compression is activated. See page 46 to
adjust the dynamic range compression.
qa MULTI CH IN: Lights up when adjusting the
level of the MULTI CH IN sub woofer
channel.
qs COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
qd OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
8
MEMORY
continued
GB
31
Hide quick links:
Advertisement
Table of Contents
