Welcome Thank you for choosing the Cisco ISA500 Series Integrated Security Appliances, a member of the Small Business Family. The ISA500 Series are a set of Unified Threat Management (UTM) security appliances that provide business class security gateway solutions with dual WAN, DMZ,...
Small Business SPEED LINK /ACT POWER/SYS CONFIGURABLE ISA550W Front Panel ISA550W Cisco Small Business SPEED LINK /ACT POWER/SYS WLAN CONFIGURABLE ISA570 Front Panel ISA570 Cisco Small Business SPEED LINK /ACT POWER/SYS CONFIGURABLE Cisco ISA500 Series Integrated Security Appliances Quick Start Guide...
Page 4
Flashes green when the USB device is transmitting and receiving data. WLAN Indicates the WLAN status. • Solid green when the WLAN is up. (ISA550W and ISA570W only) • Flashes green when the WLAN is transmitting and receiving data. Cisco ISA500 Series Integrated Security Appliances Quick Start Guide...
A NT02 CONFIGURABLE CONFIGURABLE L A N L A N WA N WA N RESET RESET POWER POWER Power Power Connector Connector Configurable Configurable Port Port Port Port Ports Ports Ports Ports Cisco ISA500 Series Integrated Security Appliances Quick Start Guide...
GUEST VLAN 192.168.2.1 Mounting the Cisco ISA500 Series Integrated Security Appliances You can place your security appliance on a desktop, mount it on a wall, or mount it in a rack. Cisco ISA500 Series Integrated Security Appliances Quick Start Guide...
Insert two 18.6 mm (0.73 inch) screws, with anchors, into the wall 234 mm apart (9.21 inches) horizontally. Leave 3 to 4 mm (about 1/ 8 inch) of the screw threads beneath the screw head exposed. Cisco ISA500 Series Integrated Security Appliances Quick Start Guide...
Install the security appliance into a standard rack as shown below. Place the washers on the brackets so that the holes align to the screw holes and then install the M5 screws. Step 2 Step 1 Cisco ISA500 Series Integrated Security Appliances Quick Start Guide...
Page 9
For a DSL or cable modem, or other WAN connectivity devices, connect an Ethernet network cable from the device to the WAN port on the back panel. Cisco strongly recommends using Cat5E or better cable. (Optional) For network devices, connect an Ethernet network cable from the network device to an available LAN port on the back panel.
Start a web browser. In the Address bar, enter the default LAN IP address of the security appliance: 192.168.1.1. When the login page opens, enter the username and password. The default username is “cisco”. The default password is “cisco”. Usernames and passwords are case sensitive. Click Login.
Firmware Download www.cisco.com/go/isa500software Product Documentation Cisco ISA500 Series www.cisco.com/go/isa500resources Integrated Security Appliances Technical Documentation Cisco Small Business Cisco Partner Central for www.cisco.com/web/partners/sell/smb Small Business (Partner Login Required) Cisco Small Business Home www.cisco.com/smb Cisco ISA500 Series Integrated Security Appliances Quick Start Guide...
Page 12
Small Business Support, Global: www.cisco.com/go/sbsc 78-19625-01 Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/ trademarks. Third party trademarks mentioned are the property of their respective owners.