hit counter script
Sony MAV-555 Installation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVR
  5. MAV-555
  6. Installation manual

Sony MAV-555 Installation Manual

Multi access video disk recorder
Hide thumbs Also See for MAV-555:
Table of Contents

Advertisement

Quick Links

Download this manual
MULTI ACCESS VIDEO DISK RECORDER
MAV-555
INSTALLATION MANUAL
1st Edition (Revised 1)
Serial No. 10001 and Higher

Advertisement

Table of Contents
loading

Related Manuals for Sony MAV-555

Summary of Contents for Sony MAV-555

  • Page 1 MULTI ACCESS VIDEO DISK RECORDER MAV-555 INSTALLATION MANUAL 1st Edition (Revised 1) Serial No. 10001 and Higher...
  • Page 2 4. Prevention against achieving hazardous condition due to uneven mechanical loading When this product is installed in a rack, please make sure that the rack does not achieve hazardous condition due to uneven mechanical loading. MAV-555...

  • Page 3: Table Of Contents

    DM-120 Board ..............2-4 (E) 2-3-3. EM-1 Board ................2-8 (E) 2-3-4. FM-68 Board ..............2-12 (E) 2-3-5. FP-115 Board ..............2-14 (E) 2-3-6. IF-751 Board ..............2-15 (E) 2-3-7. PU-109 Board ..............2-16 (E) 2-3-8. TM-40 Board ..............2-21 (E) 1 (E) MAV-555...

  • Page 5: Manual Structure

    Manual Structure Purpose of this manual This manual is the installation manual of the MAV-555 Multi Access Video Disk Recorder. This manual is intended for use by trained system and service engineers, and describes the information regarding installation. Contents The following is a summary of all the section for understanding the contents of this manual.

  • Page 7: Installation

    Cautions when an error appears in a HDD . Treat this unit conform to the above cautions, even when an error appeared. . Keep the unit in the condition in which the error appeared, and record the details of the error. 1-1 (E) MAV-555...

  • Page 8: Installation Procedure

    3. To prevent the internal temperature from rising, ensure air ventilation of the place where the unit is installed. Do not block the ventilation slots. If the ventilation slots are blocked, overheating inside the unit may cause fire. 1-2 (E) MAV-555...
  • Page 9 . If the power is turned on with the cabinet is removed, the air-cooling effect of the fan will be greatly reduced, damaging the HDD or its data. Avoid operating the unit with the cabinet is removed. 123.8 263.5 415.9 Unit : mm 1-3 (E) MAV-555...

  • Page 10: Power Supply

    1 Power cord : ! 1-557-377-11 2 Plug holder : 2-990-242-01 AC inlet (MAV) For customers in the United Kingdom. 1 Power cord : ! 1-782-929-11 2 Plug holder : 3-613-640-01 Safety earth (Green/Yellow) AC inlet (MAV) Live (Brown) Neutral (Blue) 1-4 (E) MAV-555...

  • Page 11: On Slots To Which Option Boards Are Inserted

    Inserted The option boards must be inserted to the different slots Power supply unit depending on the application that the MAV-555 is used. Slot No.1 An example of the name of the boards that are inserted into slots, and necessity of the analog expansion units is shown below.

  • Page 12: Rack Mounting

    : 4 pcs . Ornamental washer : 4 pcs Outer rail Standard tightening torque Inner rail Screw size Standard tightening torque M3.0 0.7 to 1.0 N.m (7 to 9 kgf.cm) M4.0 1.2 to 1.6 N.m (12 to 16 kgf.cm) 1-6 (E) MAV-555...
  • Page 13 Tighten the screws of the bracket that were temporary tightened in step 1. Rack angle 4 x 16 Rack mounting surface Rack angle PSW4 x 16 50 to 55 mm Outer rail 1 1-7 (E) MAV-555...
  • Page 14 2. Attach the rack angles to the rack with screws and ornamental washers. Secure the rack angles to the rack with the screws. Other- wise the unit may slide and fall off, resulting in injury. Rack angle Ornamental washers RK5 x 14 RK5 x 14 Ornamental washers 1-8 (E) MAV-555...

  • Page 15: Signal Input And Output

    AUDIO L : +4 dBm/ 600 Z load, Low impedance, Unbalanced AUDIO R : +4 dBm/ 600 Z load, Low impedance, Unbalanced CONTROL PANEL (BNC) 1 Vp-p, 75 Z (Sync negative) (COMPOSITE VIDEO OUT) HEAD PHONES (JM-60) _12 dBu (8 Z), Unbalanced 1-9 (E) MAV-555...
  • Page 16 TX _ TX (_) RX + RX (+) RXCT RXCT RX _ TXCT TX (+) TXCT RX (_) REMOTE IN/OUT 1, 2 : RS-422A (D-sub 9-pin, Female) Pin No. Signal RX (_) TX (+) RX (+) TX (_) 1-10 (E) MAV-555...
  • Page 17 GPI IN21 GPI OUT22 GPI IN24 GPI OUT3 GPI IN2 GPI OUT6 GPI IN5 GPI OUT9 GPI IN8 GPI OUT12 GPI IN11 GPI OUT15 GPI IN14 GPI OUT18 GPI IN17 GPI OUT21 GPI IN20 GPI OUT24 GPI IN23 1-11 (E) MAV-555...

  • Page 18: Connecting Connectors And Cable

    When connecting cables to various connectors on the rear panel, connect the following connectors/cable or their equivalent. MAV-555 Matching Connector/Cable Panel Indication Connector Connector Sony Part No. VIDEO IN (COMPOSITE) BNC, 75 Z BNC, 75 Z 1-569-370-12 VIDEO OUT (COMPOSITE) 5C-2V cable...

  • Page 19: Settings Upon Completion Of Installation

    R1 00 : 00 : 00 : 00 P1 00 : 00 : 00 : 00 010-525/625 R2 00 : 00 : 00 : 00 P2 00 : 00 : 00 : 00 Execute 7. Turn the VIDEO/MENU knob and select “YES”. 010-525/625 Execute [SET] 8. Press the SET button. 1-13 (E) MAV-555...

  • Page 20: Setting The Operation Mode

    5. Turn off the main power once. 8. Press the SET button. 9. Turn off the main power once. To re-start the system swiftly, execute [027-FAST REBOOT] from the setup menu. To re-start the system swiftly, execute [027-FAST REBOOT] from the setup menu. 1-14 (E) MAV-555...

  • Page 21: Setting The Setup Level

    8. Set the switch S300-1 on the EM-1 board back to the OFF position. 7. Set the other bytes in the same way. 8. Press the SET button. 9. Turn off the main power. 10. Set the switch S300-1 on the EM-1 board back to the OFF position. 1-15 (E) MAV-555...

  • Page 23: Service Overview

    Therefore, the filters should be cleaned periodically. For details of filter replacement, refer to the MAV-555 maintenance manual volume 1. Cleaning 1. Turn off the main power.

  • Page 24: List Of Periodic Replacement Parts

    The following parts should be replaced periodically. The replacement timing in the following chart is the operation hour reading from the hours meter. The filter should be cleaned periodically. Part name Replacement timing (guideline) Fan motor unit 60,000 hours 2-2 (E) MAV-555...

  • Page 25: Description Of Internal Switches And Indicators

    Board suffix : -12 S901 Side A (Component side) Switch Do not change the setting of the switch described as “Factory use only” Ref. No. Address Name Function Factory setting S901 (F-6) Factory use 1 2 3 4 2-3 (E) MAV-555...

  • Page 26: Dm-120 Board

    2-3. Description of Internal Switches and Indicators 2-3-2. DM-120 Board Board suffix : -13 and higher S600 S601 D900 D1000 D600 D800 D700 S200 Side A (Component side) 2-4 (E) MAV-555...
  • Page 27 Flashes when the IC702 configuration Flashes is completed. D800 (A-4) Green Flashes when the IC800 configuration Flashes is completed. D900 (E-2) Green Flashes when the IC900 configuration Flashes is completed. D1000 (C-2) Green Flashes when the IC1000 configuration Flashes is completed. 2-5 (E) MAV-555...
  • Page 28 S601-6, 7 : Selects the CPU startup mode. OFF OFF : Normal operation mode OFF : TFTP server mode OFF ON : HOST debugging mode ON : Configuration mode S601-8: Not used. S602 (G-1) ABORT switch Stops operating the DM-120 board. ––– 2-6 (E) MAV-555...
  • Page 29 Lights off D1004 (B-1) Green For testing Lights off D1005 (B-1) Green For testing Lights off D1006 (B-1) Green For testing Lights off D1007 (B-1) Green For testing Lights off D1008 (B-1) Green For testing Lights off 2-7 (E) MAV-555...

  • Page 30: Board

    ON : DIAG mode S300-6, 7 : Selects the CPU startup mode. ON : Configuration mode OFF : HOST debugging mode OFF ON : TFTP server mode OFF OFF : Normal operation mode S300-8 : Not used. 2-8 (E) MAV-555...
  • Page 31 +4 : +4 dBm LEDs Ref. No. Address Color Name Function Normal condition D1100 (D-1) Green DSP2 For DSP testing Lights off D1101 (D-1) Green DSP1 For DSP testing Lights off D1102 (D-1) Green DSP3 For DSP testing Lights off 2-9 (E) MAV-555...
  • Page 32 S300-8 : Not used. S301 (K-1) Reset switch Initializes the EM-1 board ––– (both hardware and software). S302 (K-1) CPU ABORT switch Stops operating the CPU. ––– S303 (K-1) Reset switch Initializes the EM-1 board hardware. ––– 2-10 (E) MAV-555...
  • Page 33 (D-1) Green BOOT Lights up during FPGA booting Lights off D1100 (D-1) Green DSP2 For DSP testing Lights off D1101 (D-1) Green DSP1 For DSP testing Lights off D1102 (D-1) Green DSP3 For DSP testing Lights off 2-11 (E) MAV-555...

  • Page 34: Board

    ON : DIAG mode S300-6, 7 : Selects the startup mode. OFF OFF : Normal operation mode OFF : TFTP server mode OFF ON : HOST debugging mode ON : Configuration mode S104-8 : Not used. 2-12 (E) MAV-555...
  • Page 35 Lights up when a link with the LNK network is established. D458 (D-1) Green Lights up when COL data collision occurs. Lights off * : These LEDs are not used in the FM-68 board that has the suffix No.-12 and higher. 2-13 (E) MAV-555...
  • Page 36 D102 (G-3) Green Flashes when the command is sent to Flashes the EM board. D103 (G-3) Green Flashes when data is written to the FL tube. Flashes D104 (G-3) Lights up when an error occurs. Lights off 2-14 (E) MAV-555...

  • Page 37: If-751 Board

    Ref. No. Address Color Name Function Normal condition D402 (F-2) Green +5 V monitor Lights up while +5 V is supplied. Lights up +3.3 V monitor Lights up while +3.3 V is supplied. D403 (F-2) Green Lights up 2-15 (E) MAV-555...

  • Page 38: Pu-109 Board

    AUTO BOOT MODE PROGRAM FLASH, and executes the program. OFF ON : The DIAG MODE BSPS dialog is displayed. OFF ON : The DIAG MODE BSPS dialog is displayed. : The DIAG MODE BSPS dialog is displayed. 2-16 (E) MAV-555...
  • Page 39 PROGRAM FLASH, and executes the program. OFF ON ON : The DIAG MODE BSPS dialog is displayed. OFF ON : The DIAG MODE BSPS dialog is displayed. ON ON : The DIAG MODE BSPS dialog is displayed. 2-17 (E) MAV-555...
  • Page 40 S700 (L-1) Selects either Ethernet on the circuit board or Ethernet on the front of the unit. OFF (GND): Ethernet on the front of the unit ON (VCC) : Ethernet on the circuit board 2-18 (E) MAV-555...
  • Page 41 PROGRAM FLASH, and executes the program. OFF ON ON : The DIAG MODE BSPS dialog is displayed. OFF ON : The DIAG MODE BSPS dialog is displayed. ON ON : The DIAG MODE BSPS dialog is displayed. 2-19 (E) MAV-555...
  • Page 42 Lights up while +5 V is supplied. Lights up +3.3 V monitor Lights up while +3.3 V (for video) is D1401 (F-7) Green Lights up supplied. D1402 (G-7) Green +3.3 V monitor Lights up while +3.3 V (for audio) is Lights up supplied. 2-20 (E) MAV-555...

  • Page 43: Board

    The present time slot number lights up. D906 (C-1) Green TIME SLOT The present time slot number lights up. D907 (D-1) Green TIME SLOT The present time slot number lights up. D908 (D-1) Green NT/PAL Lights up during PAL mode. 2-21 (E) MAV-555...
  • Page 45 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any...
  • Page 46 Printed in Japan Sony Corporation MAV-555 (SY) J, E 1999. 9 16 Broadcasting & Professional Systems Company 3-202-563-02 ©1999...

Table of Contents