hit counter script
Bosch MIC IP ultra 7100i Installation Manual

Bosch MIC IP ultra 7100i Installation Manual

Hide thumbs Also See for MIC IP ultra 7100i:

Advertisement

MIC IP ultra 7100i │ MIC IP starlight 7100i
MIC‑7504│MIC‑7522
en
Installation Manual

Advertisement

Table of Contents
loading

Summary of Contents for Bosch MIC IP ultra 7100i

  • Page 1 MIC IP ultra 7100i │ MIC IP starlight 7100i MIC‑7504│MIC‑7522 Installation Manual...
  • Page 3: Table Of Contents

    MIC IP ultra 7100i │ MIC IP starlight 7100i Table of contents | en Table of contents Safety About this Manual Legal Information Safety Precautions Important Safety Instructions Important Notices Important Notices - Illumination Safety Customer Support and Service Introduction...
  • Page 4: Safety

    Legal Information Copyright This manual is the intellectual property of Bosch Security Systems, and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
  • Page 5: Safety Precautions

    MIC IP ultra 7100i │ MIC IP starlight 7100i Safety | en Safety Precautions In this manual, the following symbols and notations are used to draw attention to special situations: Danger! High risk: This symbol indicates an imminently hazardous situation such as “Dangerous Voltage”...
  • Page 6: Important Safety Instructions

    – Do not point the camera at the sun. Bosch Security Systems will not be liable for any damage to cameras that have been pointed directly at the sun. 2019-07-03 | 0.17 |...
  • Page 7 Notice! Bosch recommends the use of surge/lightning protection devices (sourced locally) to protect network and power cables and the camera installation site. Refer to NFPA 780, Class 1 & 2, UL96A, or the equivalent code appropriate for your country/region, and to local building codes.
  • Page 8: Important Notices

    | Safety MIC IP ultra 7100i │ MIC IP starlight 7100i Important Notices For use in China: CHINA ROHS DISCLOSURE TABLE Moving cameras Hazardous substance table according to SJ/T 11364-2014 Cr 6+ PBDE (Pb) (Hg) (Cd) (Cr 6+) (PBB) (PBDE) Housing &...
  • Page 9 MIC IP ultra 7100i │ MIC IP starlight 7100i Safety | en Environmental statement - Bosch has a strong commitment towards the environment. This device has been designed to respect the environment as much as possible. Electrostatic-sensitive device - Use proper ESD safety precautions when handling the camera to avoid electrostatic discharge.
  • Page 10 MIC IP ultra 7100i High-definition 4K PTZ camera MIC IP starlight 7100i High-definition PTZ camera Note: Changes or modifications not expressly approved by Bosch could void the user’s authority to operate the equipment. FCC & ICES Information (U.S.A. and Canadian Models Only) This device complies with part 15 of the FCC Rules.
  • Page 11: Important Notices - Illumination Safety

    MIC IP ultra 7100i │ MIC IP starlight 7100i Safety | en Important Notices - Illumination Safety The text in this section applies only to cameras which have the optional illuminator accessory. Notice! This product has been tested according to standard IEC62471:2006 “Photobiological safety of lamps and lamp systems”.
  • Page 12: Customer Support And Service

    | Safety MIC IP ultra 7100i │ MIC IP starlight 7100i Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Telephone: 800-366-2283 Fax: 800-366-1329 Email: cctv.repair@us.bosch.com...
  • Page 13: Introduction

    Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. – Do not use this product if any component appears to be damaged. Please contact Bosch Security Systems in the event of damaged goods. –...
  • Page 14: Parts List - Camera

    Quick Installation Guide Safety instructions Additional Tools The following table lists additional tools (not supplied by Bosch) that may be required to install a MIC camera or its accessories: 1 Phillips-head screwdriver to secure the ground lug of the camera...
  • Page 15: Product Description

    MIC IP ultra 7100i │ MIC IP starlight 7100i Product Description | en Product Description The first ruggedized PTZ camera with UHD (“4K”) resolution, MIC IP ultra 7100i offers unmatched imaging and reliability in extreme environments. The camera’s ruggedized design meets customer expectations in demanding environments that exceed the capabilities of conventional IP cameras.
  • Page 16: Overview Of Installation Steps

    Electrical Code ® (NEC)), Canadian Electrical Code, Part I (also called CE Code or CSA C22.1), and all applicable local codes. Bosch Security Systems accepts no liability for any damages or losses caused by incorrect or improper installation. Caution! ELECTRIC SHOCK HAZARD...
  • Page 17: Mounting

    MIC-IP67-5PK MIC7000 IP67 Connector Kit – MIC-9K-IP67-5PK (IP67 Connector kit for MIC IP fusion 9000i, MIC IP ultra 7100i, and MIC IP starlight 7100i cameras) To have an installation rated IP67, you must use the appropriate IP67 Connector Kit from Bosch.
  • Page 18 If the camera is installed in a highly exposed location where lightning strikes may occur, then Bosch recommends installing a separate lightning conductor within 0.5 m (1.6 ft) of the camera and at least 1.5 m (4.9 ft) higher than the camera. A good earth bonding connection to the camera housing itself will provide protection against damage from secondary strikes.
  • Page 19: Mounting Options

    The fasteners and fixtures shipped with the camera help to keep the camera secure. Always use Bosch-supplied screws and other fasteners when installing or performing maintenance on the camera. Bosch-supplied hardware is properly treated and engineered for safe use with your MIC camera.
  • Page 20 | Mounting MIC IP ultra 7100i │ MIC IP starlight 7100i 90° 90° 55° 55° Figure 5.1: Tilt range, MIC IP ultra 7100i 2019-07-03 | 0.17 | Installation Manual Bosch Security Systems...
  • Page 21: Mounting Bracket Options

    Bosch sells a complete series of mounting brackets that support multiple mounting configurations. Always use only Bosch-supplied mounts, which are designed for safe installation of your MIC camera. Refer to the MIC Series Mounting Brackets Installation Guide for complete installation instructions.
  • Page 22: Considerations For Mounting The Camera In Inverted Orientation

    | Mounting MIC IP ultra 7100i │ MIC IP starlight 7100i Corner Mount Figure 5.4: Typical Corner mount configuration Note: Always install an SCA when you install a wall mount for any installation configuration. Route cables through the bottom of the SCA (to prevent water from running into the side or top of the SCA along the cables).
  • Page 23 MIC IP ultra 7100i │ MIC IP starlight 7100i Mounting | en The figure that follows shows the camera installed in inverted orientation on a pole. Figure 5.6: MIC camera mounted in inverted orientation (on pole) Bosch Security Systems Installation Manual...
  • Page 24: Optional) Installing An Sd Card

    | (Optional) Installing an SD card MIC IP ultra 7100i │ MIC IP starlight 7100i (Optional) Installing an SD card The steps that follow are applicable for MIC enhanced models (MIC-7504-Z12xR, MIC-7522- Z30xR). Use a T20 Torx driver to remove the two (2) fasteners from the SD card cover on the rear of the camera head.
  • Page 25: Optional) Configuration Programming In The Shipping Box

    MIC IP ultra 7100i │ MIC IP starlight 7100i (Optional) Configuration Programming in the Shipping Box | en (Optional) Configuration Programming in the Shipping The camera packaging allows installers to connect the camera to the network and configure the camera still in the box.
  • Page 26: (Optional) Configuration Programming On A Temporary Table-Top Stand

    | (Optional) Configuration Programming on a Temporary Table-top Stand MIC IP ultra 7100i │ MIC IP starlight 7100i (Optional) Configuration Programming on a Temporary Table-top Stand Caution! Take extra care lifting or moving MIC cameras because of their weight.
  • Page 27: Installing A Mic Camera On A Hinged Dca

    MIC IP ultra 7100i │ MIC IP starlight 7100i Installing a MIC Camera on a Hinged DCA | en Installing a MIC Camera on a Hinged DCA The hinge feature allows installers to “hang” the camera temporarily but securely during installation for easier connection of cables/wiring before final bolts are installed.
  • Page 28 MIC IP ultra 7100i │ MIC IP starlight 7100i 3/4” NPT 1. Attach the DCA to the mounting location using user-supplied hardware (item 1). (Bosch recommends stainless steel bolts and washers.) 2. Attach user-supplied conduit or glands to the side hole or to the bottom hole. If applicable, use the conduit adapter (male M25 to female ¾...
  • Page 29 MIC IP ultra 7100i │ MIC IP starlight 7100i Installing a MIC Camera on a Hinged DCA | en T25 Torx 5. Insert the O-ring (item 1). 6. Loosen the Torx bolts two (2) turns (items 2). Slide the hook up (item 3). Tighten the bolts to hold the hook in place temporarily (item 4).
  • Page 30 | Installing a MIC Camera on a Hinged DCA MIC IP ultra 7100i │ MIC IP starlight 7100i 7. For inverted installation, apply a small amount of grease to the primary O-ring to hold it in place. 8. Push the wires from the camera base into the DCA while positioning the base pin of the camera under the DCA hook (item 1).
  • Page 31 MIC IP ultra 7100i │ MIC IP starlight 7100i Installing a MIC Camera on a Hinged DCA | en Notice! Risk of damage to the camera! Ease the camera into position; do not allow it to fall unassisted into rotated position or allow head to slam into any surface or object! 10.
  • Page 32 | Installing a MIC Camera on a Hinged DCA MIC IP ultra 7100i │ MIC IP starlight 7100i (x4) 17 N m (12.5 ft lb) 12. Carefully tip the camera to its final position. Avoid pinching wires between the camera base and the DCA! Insert four washers and hex bolts (supplied).
  • Page 33: Optional) Installing A Sunshield

    MIC IP ultra 7100i │ MIC IP starlight 7100i (Optional) Installing a Sunshield | en (Optional) Installing a Sunshield Quantity Component Sunshield shell Screws, M4 x 10 Flat washers Quick Installation Guide Additional Tools Required Phillips-head screwdriver, #2, to remove factory-installed plastic screws from...
  • Page 34 | (Optional) Installing a Sunshield MIC IP ultra 7100i │ MIC IP starlight 7100i Make sure that the tabs in the sunshield lock into place in the camera head. Install the M4 x 10 screws. Tighten the screws to 2.2 N m (19.5 in-lb).
  • Page 35 MIC IP ultra 7100i │ MIC IP starlight 7100i (Optional) Installing a Sunshield | en M4 x 8 2.2 N m (19.5 in lb) Note that when you install the sunshield correctly, the sunshield appears as in the following figure.
  • Page 36: Optional) Installing The Illuminator

    The camera head will rotate automatically into inverted position (180°). Regardless of mounting orientation, the visor should always be above the camera window. Bosch suggests storing the access plug inside the DCA mount (or wall mount accessory) in case it becomes necessary to remove the illuminator.
  • Page 37 MIC IP ultra 7100i │ MIC IP starlight 7100i (Optional) Installing the Illuminator | en Bosch Security Systems Installation Manual 2019-07-03 | 0.17 |...
  • Page 38: (Optional) Canting The Camera

    | (Optional) Canting the Camera MIC IP ultra 7100i │ MIC IP starlight 7100i (Optional) Canting the Camera MIC IP ultra 7100i cameras have on-site canting functionality. Installers can adjust the camera from an upright position to a canted position (35º angle) if necessary.
  • Page 39 Bosch strongly recommends attaching the camera to a DCA and mounting the DCA before canting the camera. To cant the camera, follow these steps: 1.
  • Page 40 | (Optional) Canting the Camera MIC IP ultra 7100i │ MIC IP starlight 7100i Figure 12.3: Cant the camera head. 6. Reinsert the screws into both yoke arms. Note the letter assigned to each screw in the figure below. Figure 12.4: Reinsert the screws in the yoke arms in the following sequence: ABCD.
  • Page 41 MIC IP ultra 7100i │ MIC IP starlight 7100i (Optional) Canting the Camera | en 0.0mm - 0.5mm Figure 12.5: Attach the yoke caps. 10. Canting is complete. Figure 12.6: Canting is complete. 11. Change the camera orientation to “Canted.” Complete the following steps: –...
  • Page 42: Connections

    24 VAC. After the High PoE Midspan power source is restored, the camera switches power input again to the High PoE Midspan. Bosch recommends 24VAC power output of 24V at 100VA, 4A with a slow blow fuse. Camera models...
  • Page 43: Ethernet Connections

    Note: If the MIC camera will be installed directly to a mounting surface, instead of onto a MIC DCA or a MIC wall mount bracket, Bosch recommends using the connector kit for your model of camera to protect the connections against moisture and dust particles. Each kit provides components for connecting as many as 5 MIC cameras.
  • Page 44: Typical System Configurations

    | Typical System Configurations MIC IP ultra 7100i │ MIC IP starlight 7100i Typical System Configurations 14.1 Typical IP Configuration with High PoE midspan (no I/O connections) Figure 14.1: System Configuration with a midspan (no input or output connections) 1 MIC camera...
  • Page 45: Typical Configuration With Mic-Alm-Was-24

    MIC IP ultra 7100i │ MIC IP starlight 7100i Typical System Configurations | en 14.2 Typical Configuration with MIC-ALM-WAS-24 Figure 14.2: System Configuration with an MIC Alarm-Washer Box (MIC-ALM-WAS-24) 1 MIC camera 2 MIC Hinged DCA (MIC-DCA-Hx) 3 RS-485 cable, 3-conductor (user-...
  • Page 46: Troubleshooting

    | Troubleshooting MIC IP ultra 7100i │ MIC IP starlight 7100i Troubleshooting Table of Troubleshooting Issues The table below identifies issues that could occur with the camera, and how to resolve them. Note: Refer to the Error Codes section of the manual for descriptions of the error codes that appear on the OSD.
  • Page 47 MIC IP ultra 7100i │ MIC IP starlight 7100i Troubleshooting | en Bosch Security Systems Installation Manual 2019-07-03 | 0.17 |...
  • Page 48: Maintenance

    No User-serviceable Parts Except for the external wiper blade, the device contains no user-serviceable parts. Contact your local Bosch service center for device maintenance and repair. In the event of failure, the device should be removed from site for repair.
  • Page 49: Disposal

    MIC IP ultra 7100i │ MIC IP starlight 7100i Disposal | en Disposal Disposal Your Bosch product has been developed and manufactured using high- quality materials and components that can be reused. This symbol means that electronic and electrical devices that have reached the end of their working life must be disposed of separately from household waste.
  • Page 50: Technical Data

    | Technical data MIC IP ultra 7100i │ MIC IP starlight 7100i Technical data For product specifications, see the datasheet for your camera, available on the appropriate product pages of the Online Product Catalog at www.boschsecurity.com. 2019-07-03 | 0.17 |...
  • Page 51: Best Practices For Outdoor Installation

    MIC IP ultra 7100i │ MIC IP starlight 7100i Best Practices for Outdoor Installation | en Best Practices for Outdoor Installation Cameras installed outdoors are susceptible to surges and lightning. Always include surge and lightning protection when installing outdoor cameras.
  • Page 52 | Best Practices for Outdoor Installation MIC IP ultra 7100i │ MIC IP starlight 7100i 1 Indoor main building 2 Network equipment 3 Connect the ground of the camera 4 Surge protection power supply to the building earth ground.
  • Page 53 MIC IP ultra 7100i │ MIC IP starlight 7100i Best Practices for Outdoor Installation | Bosch Security Systems Installation Manual 2019-07-03 | 0.17 |...
  • Page 54 | Best Practices for Outdoor Installation MIC IP ultra 7100i │ MIC IP starlight 7100i 2019-07-03 | 0.17 | Installation Manual Bosch Security Systems...
  • Page 56 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2019...

This manual is also suitable for:

Mic ip starlight 7100iMic-7504Mic-7522

Table of Contents