Managing pcie adapters for ibm power system l922 9008-22l; ibm power system s922 9009-22a; ibm power system h922 9223-22h; ibm power system s914 9009-41a; ibm power system s924 9009-42a; ibm power system h924 9223-42h; ibm emx0 pcie gen3 i/o expansion dra
Page 1
Power Systems Managing PCIe adapters for the 9008-22L, 9009-22A, 9009-41A, 9009-42A, 9223-22H, or 9223-42H and EMX0 PCIe Gen3 I/O expansion drawer...
Page 3
Power Systems Managing PCIe adapters for the 9008-22L, 9009-22A, 9009-41A, 9009-42A, 9223-22H, or 9223-42H and EMX0 PCIe Gen3 I/O expansion drawer...
Page 4
Before using this information and the product it supports, read the information in “Safety notices” on page v, “Notices” on page 197, the IBM Systems Safety Notices manual, G229-9054, and the IBM Environmental Notices and User Guide, Z125–5823. This edition applies to IBM Power Systems servers that contain the POWER9 processor and to all associated models.
Electrical voltage and current from power, telephone, and communication cables are hazardous. To avoid a shock hazard: v If IBM supplied the power cord(s), connect power to this unit only with the IBM provided power cord. Do not use the IBM provided power cord for any other product.
Page 8
– For racks with AC power, connect all power cords to a properly wired and grounded electrical outlet. Ensure that the outlet supplies proper voltage and phase rotation according to the system rating plate. – For racks with a DC power distribution panel (PDP), connect the customer’s DC power source to the PDP.
Page 9
v Each rack cabinet might have more than one power cord. – For AC powered racks, be sure to disconnect all power cords in the rack cabinet when directed to disconnect power during servicing. – For racks with a DC power distribution panel (PDP), turn off the circuit breaker that controls the power to the system unit(s), or disconnect the customer’s DC power source, when directed to disconnect power during servicing.
Page 10
CAUTION: Removing components from the upper positions in the rack cabinet improves rack stability during relocation. Follow these general guidelines whenever you relocate a populated rack cabinet within a room or building. v Reduce the weight of the rack cabinet by removing equipment starting at the top of the rack cabinet.
Page 11
DANGER: Rack-mounted devices are not to be used as shelves or work spaces. (L002) (L003) Safety notices...
Page 12
DANGER: Multiple power cords. The product might be equipped with multiple AC power cords or multiple DC power cables. To remove all hazardous voltages, disconnect all power cords and power cables. (L003) (L007) CAUTION: A hot surface nearby. (L007) (L008) Managing PCIe adapters...
Page 13
Exchange only with the IBM-approved part. Recycle or discard the battery as instructed by local regulations. In the United States, IBM has a process for the collection of this battery. For information, call 1-800-426-4333. Have the IBM part number for the battery unit available when you call. (C003)
Page 14
Freewheeling will cause uneven cable wrapping around winch drum, damage cable, and may cause serious injury. (C048) Power and cabling information for NEBS (Network Equipment-Building System) GR-1089-CORE The following comments apply to the IBM servers that have been designated as conforming to NEBS (Network Equipment-Building System) GR-1089-CORE: Managing PCIe adapters...
Page 15
The equipment is suitable for installation in the following: v Network telecommunications facilities v Locations where the NEC (National Electrical Code) applies The intrabuilding ports of this equipment are suitable for connection to intrabuilding or unexposed wiring or cabling only. The intrabuilding ports of this equipment must not be metallically connected to the interfaces that connect to the OSP (outside plant) or its wiring.
System S922L (9008-22L), IBM Power System S922 (9009-22A), IBM Power System H922 (9223-22H), IBM Power System S914 (9009-41A), IBM Power System S924 (9009-42A), or IBM Power System H924 (9223-42H), and EMX0 PCIe Gen3 I/O expansion drawer. Overview of managing PCIe adapters Find information about using and managing Peripheral Component Interconnect Express (PCIe) adapters.
This feature is typically referred to as Multi-Path I/O (MPIO). MPIO support is part of the operating system support and can be used to provide a redundant IBM SAS RAID controller configuration with RAID protected disks.
Find information about using and managing the Peripheral Component Interconnect Express (PCIe) adapters for the IBM Power System S922L (9008-22L), IBM Power System S922 (9009-22A), or IBM Power System H922 (9223-22H) servers.Also, find information about specifications and installation notes for specific adapters.
Find information about using and managing the Peripheral Component Interconnect Express (PCIe) adapters that are supported for the IBM Power System S914 (9009-41A), IBM Power System S924 (9009-42A), or IBM Power System H924 (9223-42H) servers. Also, find information about specifications and installation notes for specific adapters.
For more information about the PCIe3 SAS RAID controllers, see the following topics: v SAS RAID controllers for AIX. v SAS RAID controllers for IBM i. v SAS RAID controllers for Linux. Managing PCIe adapters...
Table 8. Supported PCIe adapters in the EMX0 PCIe Gen3 I/O expansion drawer attached to a system that is running the AIX, IBM i, or Linux operating system (continued) Feature code Description EJ0J PCIe3 RAID SAS Quad-port 6 Gb Adapter (FC EJ0J; CCIN 57B4); Adapter FRU number:...
Installing the AIX device driver software Find information about how to install the AIX device driver software for a PCI adapter. Before you begin If you are installing the AIX operating system at this time, install the adapter before you install the operating system.
Find information about using and managing the Peripheral Component Interconnect Express (PCIe) adapters that are supported for the IBM Power System S922L (9008-22L), IBM Power System S922 (9009-22A), or IBM Power System H922 (9223-22H), and EMX0 PCIe Gen3 I/O expansion drawer.Also, find information about specifications and installation notes for specific adapters.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 30
Adapter FRU number 74Y4064 (Designed to comply with RoHS requirement) Wrap plug 10N7405 Note: Wrap plugs are not included with the card and cannot be purchased from IBM. I/O bus architecture PCIe2 x4 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter...
Page 31
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
PCIe LP POWER GXT145 Graphics Accelerator (FC 5269; CCIN 5269) Learn about the features, requirements, installation notes, and troubleshooting tips for the PCIe LP POWER GXT145 Graphics Accelerator adapter. Overview The PCIe LP POWER GXT145 Graphics Accelerator adapter is a versatile 2D graphics accelerator and enhances the system unit video.
Page 33
If attaching a device that requires a 15 pin D-Shell receptacle for a VGA connection (eg. when the graphic adapter output is routed directly to a 7316-TF3 display or indirectly through a KVM switch), order a VGA to DVI Connection Converter, feature number 4276 and connect it to the main DVI connector (labeled 1/3) of your converter cable.
Page 34
v The adapter v The operating system documentation v The system service guide for removing and replacing features v The PCI adapter placement documentation v A flat-blade screwdriver v The media containing the device driver software Installing the device driver software Find information about installing device driver software.
Page 35
1. Determine the PCIe slot in which to place the adapter. The PCIe LP POWER GXT145 Graphics Accelerator adapter has an x1 PCIe connector and can be placed in a PCIe x1, x4, x8, or x16 slot. See PCI adapter placement for information about the PCIe slots on your system unit.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 37
10N9824 (Designed to comply with RoHS requirement) Wrap plug FRU number 12R9314 Note: The wrap plug is included with the card, and can also be purchased from IBM. I/O bus architecture PCI Express (PCIe) Base and Card Electromechanical (CEM) 2.0...
Page 38
Table 13. POST conditions and results Green LED Yellow LED State Action to be taken Wake-up failure (dead board) Perform AIX, IBM i, or Linux operating system diagnostics procedure. POST failure (dead board) Perform AIX, IBM i, or Linux operating system diagnostics procedure. Slow flash...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 40
The PCIe LP 4-Port Async EIA-232 Adapter provides connections for four asynchronous EIA-232 devices using a 4-port DB-9F DTE fan-out cable. Ports are programmable to support EIA-232 protocols at a line speed of 128 Kbps. Figure 5. PCIe LP 4-Port Async EIA-232 Adapter Figure 6.
Page 41
Installing the adapter For general instructions on how to install a PCI adapter, see the For instructions about installing PCIe adapters, see Installing, removing, or replacing PCIe adapters (http://www.ibm.com/support/ knowledgecenter/POWER9/p9hak/pciadapters.htm) and select the system that you are working on. topic. Return here to verify the adapter installation.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 43
74Y3467 (Designed to comply with RoHS requirement) Wrap plug FRU number 12R9314 Note: The wrap plug is included with the card, and can also be purchased from IBM. I/O bus architecture PCI Express (PCIe) Base 2.0 and x8 PCIe bus interface...
Page 44
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
10N9824 (Designed to comply with RoHS requirement) Wrap plug FRU number 12R9314 Note: The wrap plug is included with the card, and can also be purchased from IBM. I/O bus architecture PCI Express (PCIe) Base and Card Electromechanical (CEM) 2.0...
Page 46
Table 19. POST conditions and results Green LED Yellow LED State Action to be taken Wake-up failure (dead board) Perform AIX, Linuxor IBM i operating system diagnostics. POST failure (dead board) Perform AIX, Linuxor IBM i operating system diagnostics. Slow blink...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 48
The POWER GXT145 PCI Express Graphics Accelerator adapter is a PCI Express (PCIe) adapter that accelerates and enhances the system unit video. The adapter has no hardware switches to set. Mode selection is made through the software. Figure 9 shows the adapter and its connectors. Figure 9.
Page 49
Display power management: Video Electronics Standards Association (VESA), Display Power Management Signaling (DPMS) For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/p9eab/ p9eab_mtm_pciplacement.htm) and select the system that you are working on. Preparing for installation If you are installing the operating system at this time, install the adapter before you install the operating system.
Page 50
5. Type the name of the input device that you are using, or press F4 to select the input device from a list. 6. Press Enter. The Install Additional Device Software window highlights the SOFTWARE to install option. 7. Press F4 to select List. 8.
Page 51
To check for operating system and partition requirements, see one of the following links: v The latest version of enabling libraries and utilities can be downloaded from Fix Central (http://www.ibm.com/support/fixcentral/). Managing PCIe adapters...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 53
I/O bus architecture PCIe-V1.0a 1x Slot requirement For details about the maximum number of adapters that are supported, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on.c Busmaster Adapter size...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 55
v CAT5e (or later) UTP cables for 1000 Mbps network attachment v CAT5 or CAT3 UTP cables for 100 Mbps or 10 Mbps network attachment The cables are attached to the copper RJ45 connectors. Each port is independent of one another and supports full-duplex or half-duplex.
Page 56
Adapter FRU number 74Y4064 (Designed to comply with RoHS requirement) Wrap plug 10N7405 Note: Wrap plugs are not included with the card and cannot be purchased from IBM. I/O bus architecture PCIe2.0, x4 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 58
provides Ethernet connectivity with a nominal data rate of 10 gigabits per second (Gbps). The link aggregation and failover features of the adapter are ideal for critical network applications that require redundancy and high availability. Figure 13 on page 43 shows the FC EC2M adapter. The adapter provides the following features: v The adapter is a PCIe3 NIC network convergence adapter.
Page 59
To check for operating system and partition requirements, see one of the following links: v The latest version of enabling libraries and utilities can be downloaded from Fix Central (http://www.ibm.com/support/fixcentral/). v IBM Power Systems Prerequisites (https://www14.software.ibm.com/support/customercare/iprt/ home). v IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). Managing PCIe adapters...
The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 61
I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V Form factor...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 63
RDMA over Converged Ethernet (RoCE) Dual port 10 Gb Ethernet network connectivity Supports 10 Gb Ethernet SFP+ connectivity ® Supports 10 Gb SFP+ SR connectivity with a 10 Gb optical transceiver (IBM P/N 77P9336, purchased separately) ® Network Installation Management (NIM) support PCI Express 3.0 (up to 8 GT/s) x8...
Page 64
PowerVM SR-IOV support Cables ® For 10 GbE, IBM offers Direct Attach Copper (DAC) cables up to 5 M. SFP based transceivers are included on each end of these cables. For more information about adapter cabling, see the “Cable and Transceiver information.”...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 66
Figure 17. PCIe3 LP 2-port 25/10 Gb NIC & RoCE SFP28 Adapter (FC EC2T) Figure 18. PCIe3 2-port 25/10 Gb NIC & RoCE SFP28 Adapter (FC EC2U) Specifications Item Description Managing PCIe adapters...
Page 67
Dual port 25 Gb/10 Gb Ethernet network connectivity Supports 25 Gb Ethernet SFP28 connectivity Supports 10 Gb Ethernet SFP+ connectivity ® Supports 25 Gb SFP28 SR connectivity with a 25 Gb optical transceiver (IBM P/N 77P5153, purchased separately) ® Supports 10 Gb SFP+ SR connectivity with a 10 Gb optical transceiver (IBM...
Page 68
OM3 cable. Either one or both of the adapter’s two SFP28 ports can be populated. ® For 10 GbE, IBM qualifies and supports SFP+ optical transceiver (FC EB46) to install into the adapter. Customers can also use their own optical cabling and SFP+ optical transceiver for the other end.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 70
– 802.3x for flow control – 802.3ad for load-balancing and failover – IEEE 802.3ad and 802.3 for link aggregation v The adapter provides message signal interrupts (MSI), MSI-X, and support of legacy pin interrupts. v The adapter supports jumbo frames up to 9.6 KB. v The adapter supports gigabit EtherChannel (GEC) with the existing software.
Page 71
This adapter feature requires the use of compatible SFP+10 Gbps, copper, twinaxial, active, Ethernet cables. See Figure 21 on page 56 for a view of the cable top and cable bottom. These cables are compliant with industry standard specifications SFF-8431 Rev 4.1 and SFF-8472 Rev 10.4, and all applicable IBM requirements.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 73
The PCIe3 2-port 10 GbE NIC and RoCE SFP+ Copper Adapter is a PCIe generation 3 (PCIe3), full-height, dual port, 10 Gigabit Ethernet (GbE) adapter with a PCIe 3.0 host bus interface. The adapter provides two 10 Gb SFP+ ports for copper twinax cabling. These cables also include copper transceivers. The adapter is a converged network adapter supporting both NIC and IBTA RoCE standard.
Page 74
This adapter feature requires the use of compatible SFP+10 Gbps, copper, twinaxial, active, Ethernet cables. See Figure 23 on page 59 for a view of the cable top and cable bottom. These cables are compliant with industry standard specifications SFF-8431 Rev 4.1 and SFF-8472 Rev 10.4, and all applicable IBM requirements.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 76
I/O bus architecture PCIe3 x16 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V Form factor...
Page 77
See FC EB2B, EB2H, and ECBN for a 1 M, 3 M, and 5 M copper cables. Transceivers IBM qualifies and supports QSFP28 optical transceiver (FC EB59) to install into the adapter. Customers can also use their own optical cabling and QSP28 optical transceiver for the other end.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 79
I/O bus architecture PCIe 2.2 compliant Slot priority For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Busmaster Form factor...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 81
I/O bus architecture PCIe2.2 compliant Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Busmaster Form factor Short form factor, half-length...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 83
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
After the warranty period, if the maximum write capability is achieved, the adapter's replacement is not covered under IBM maintenance. This adapter has protection against single Flash channel failures. To prevent the entire adapter from failing, software RAID should be used.
Page 85
I/O bus architecture PCIe3 x8. Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V, 12 V.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 87
I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V, 12 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 89
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
PCIe4 x16 1-Port EDR 100 GB IB ConnectX-5 CAPI Capable Adapter (FC EC62 and EC63; CCIN 2CF1) Learn about the specifications and operating system requirements for feature code (FC) EC62 and EC63 adapters. Overview FC EC62 and EC63 are both the same adapter with different feature codes. FC EC62 is a low-profile adapter and FC EC63 is a full-height adapter.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 92
I/O bus architecture PCIe4 x16 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V, 12 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
I/O bus architecture PCIe3 x16 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 12 V Form factor Low profile, double-wide adapter PCIe3 Optical Cable Adapter (FC EJ07;...
I/O bus architecture PCIe3 x16 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 12 V Form factor Full-height, full-length PCIe3 cable adapter (FC EJ08;...
SAS drives as dedicated hot-spares with equal or higher capacity. Important: For more information, see the SAS RAID controllers for AIX, SAS RAID controllers for IBM i, or SAS RAID controllers for Linux topics for more information and important considerations for multi-initiator and high availability or dual storage IOA configurations.
Page 97
PCIe 3.0 but compatible to PCIe 2.0 or PCIe 1.0 slots. Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 99
This adapter enables configuring the SAS drives as dedicated hot-spares with equal or higher capacity. Important: For more information, see the SAS RAID controllers for AIX, SAS RAID controllers for IBM i, or SAS RAID controllers for Linux topics for more information and important considerations for multi-initiator and high availability or dual storage IOA configurations.
Page 100
System Enclosure Services (SES) code is applied to the enclosure before attaching to the FC EJ0M adapter. For details, see the IBM Prerequisites website. An automatic sector conversion takes place for use with the new adapter when migrating existing SAS disk enclosures and devices from existing previous PCIe SAS adapters to PCIe2 or PCIe3 SAS adapters.
The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 102
To check for operating system and partition requirements, see one of the following links: v The latest version of enabling libraries and utilities can be downloaded from Fix Central (http://www.ibm.com/support/fixcentral/). v IBM Power Systems Prerequisites (https://www14.software.ibm.com/support/customercare/iprt/ home). v IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). Managing PCIe adapters...
The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 104
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Externally attached devices are designed to run at a maximum data rate of 6 Gbps for SAS tape devices. Important: For more information, see the SAS RAID controllers for AIX, SAS RAID controllers for IBM i, or SAS RAID controllers for Linux topics for more information and important considerations for multi-initiator and high availability or dual storage IOA configurations.
Page 106
PCIe 3.0 but compatible to PCIe 2.0 or PCIe 1.0 slots. Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 108
PCIe 3.0 but compatible to PCIe 2.0 or PCIe 1.0 slots. Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 110
For higher availability, place adapters in separate enclosures where supported For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 112
SSDs and cold data to attached HDDs in the AIX or Linux systems. Systems running the IBM i operating system do not support the two adapters being owned by different partitions, nor the Easy Tier function.
Page 113
To check for operating system and partition requirements, see one of the following links: v The latest version of enabling libraries and utilities can be downloaded from Fix Central (http://www.ibm.com/support/fixcentral/). Managing PCIe adapters...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 115
Figure 44. PCIe3 x8 cache SAS RAID internal adapter 6 Gb Specifications Item Description Adapter CCIN number 57DC Adapter FRU number 01JC780 (includes the backup power module card) - (Designed to comply with RoHS requirement) I/O bus architecture PCIe3 x8 Slot requirement Internal PCIe3 slot with x16 connector and x8 bus signaling Adapter is installed in slot P1-C49...
IBM Prerequisite website (www-912.ibm.com/e_dir/eServerPrereq.nsf). v IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html).
Page 117
PCIe1 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Cables SAS device attachment requires specific cables that are provided with the subsystem or device features being attached.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 119
PCIe1 x4 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Supported Systems POWER8 and POWER9 processor-based systems Voltage 3.3 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 121
10N9824 (Designed to comply with RoHS requirement) Wrap plug FRU number 12R9314 Note: The wrap plug is included with the card, and can also be purchased from IBM. I/O bus architecture PCI Express (PCIe) Base and Card Electromechanical (CEM) 2.0 x8 PCIe bus interface...
Page 122
Table 32. POST conditions and results Green LED Yellow LED State Action to be taken Wake-up failure (dead board) Perform AIX, IBM i, or Linux operating system diagnostics procedure. POST failure (dead board) Perform AIX, IBM i, or Linux operating system diagnostics procedure. Slow flash...
Page 123
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
PCIe3 LP 2x10Gb FCoE 2x1GbE SFP+ Adapter (FC EL38; CCIN 2B93) Learn about the specifications and operating system requirements for the feature code (FC) EL38 adapters. Overview The PCIe3 LP 2x10Gb FCoE 2x1GbE SFP+ Adapter is a PCI Express (PCIe) generation 3, low-profile capable adapter.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 126
SAS drives as dedicated hot-spares with equal or higher capacity. Important: For more information, see the SAS RAID controllers for AIX, SAS RAID controllers for IBM i, or SAS RAID controllers for Linux topics for more information and important considerations for multi-initiator and high availability or dual storage IOA configurations.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 128
high-performance adapter that consolidates traffic for networking and Fibre Channel storage. The adapter is optimized for cloud computing, virtualization, storage, and other data center applications. Both the FCoE and network interface controller (NIC) functions are available for all the four ports. Use of the FCoE requires that you use convergence enhanced Ethernet (CEE) switches.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 130
v The adapter supports the following standards for the different ports and functions: – AIX NIM and Linux Network Install are supported – IBTA RoCE v2 support – IEEE 802.3ae in the 10 GbE ports – 802.3ab in the 1 GbE ports –...
Page 131
This adapter feature requires the use of compatible SFP+10 Gbps, copper, twinaxial, active, Ethernet cables. See Figure 52 for a view of the cable top and cable bottom. These cables are compliant with industry standard specifications SFF-8431 Rev 4.1 and SFF-8472 Rev 10.4, and all applicable IBM requirements.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 133
Regular-height tailstock part number: 00E2862 Low-profile tailstock part number: 00E2721 Wrap plug FRU number 10N7405 (RJ45 wrap plug) Note: Wrap plugs are not included with the card and cannot be purchased from IBM. I/O bus architecture PCIe2 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 135
I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V Form factor...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 137
– Provides support for Fibre Channel class 3 – Provides a maximum Fibre Channel throughput that is achieved by using full duplex hardware support v The adapter provides an end-to-end data path parity and CRC protection, including internal data path random-access memory (RAM) v Provides architectural support for multiple upper layer protocols v Provides comprehensive virtualization capabilities with support for N_Port ID Virtualization (NPIV)
Page 138
I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V, 12 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 140
Overview FC EL4L and EL4M are both the same adapter with different feature codes. FC EL4L is a full-height adapter and FC EL4M is a low-profile adapter. The PCIe2 LP 4-port 1 GbE Adapter is a full-height, generation 2 (Gen2) PCIe adapter. This adapter provides four 1-Gb Ethernet ports that can be configured to run at 1000 megabits per second (Mbps) or 1 gigabit per second (Gbps), 100 Mbps, or 10 Mbps.
Page 141
Figure 56. PCIe2 4-port 1 GbE Adapter Specifications Item Description Adapter FRU number 74Y4064 (Designed to comply with RoHS requirement) Wrap plug 10N7405 I/O bus architecture PCIe2 x4 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 143
v The adapter is a PCIe3 NIC network convergence adapter. v The adapter supports RoCE and NIC functions but not concurrently on same adapter. v The adapter supports the following standards for the different ports and functions: – AIX NIM and Linux Network Install are supported –...
Page 144
This adapter feature requires the use of compatible SFP+10 Gbps, copper, twinaxial, active, Ethernet cables. See Figure 58 for a view of the cable top and cable bottom. These cables are compliant with industry standard specifications SFF-8431 Rev 4.1 and SFF-8472 Rev 10.4, and all applicable IBM requirements.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 146
I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V Form factor...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 148
I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V, 12 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 150
PCIe2 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Cables SR SFP+ Copper Twinax and Cat5 Ethernet cables Voltage 3.3 V, 12 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 152
PCI Express (PCIe) Base and Card Electromechanical (CEM) 2.0 x8 PCIe bus interface Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V...
Page 153
Table 41. POST conditions and results Green LED Yellow LED State Action to be taken Wake-up failure (dead board) Perform AIX, Linuxor IBM i operating system diagnostics.Perform AIX operating system diagnostics.Perform IBM i operating system diagnostics.Perform Linux operating system diagnostics. POST failure (dead board) Perform AIX, Linuxor IBM i operating system diagnostics.Perform AIX operating system...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 155
I/O bus architecture PCIe2 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V, 12 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 157
v Provides comprehensive virtualization capabilities with support for N_Port ID Virtualization (NPIV) and virtual fabric (VF) v Provides support for message signaled interrupts extended (MSI-X) v Provides support for 255 VFs and 1024 MSi-X v Provides an internal, high-speed static random-access memory (SRAM) memory v Provides ECC protection of local memory that includes single-bit correction and double-bit protection v Provides an embedded shortwave optical connection with diagnostics capability v Provides support for an on-board context management by firmware:...
Page 158
(http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V, 12 V Form factor Short, MD2 FC compatibility 4, 8, 16 Gb Cables Cables are the responsibility of the customer. Use multimode fiber optic cables with shortwave...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 160
Externally attached devices are designed to run at a maximum data rate of 6 Gbps for SAS tape devices. Important: For more information, see the SAS RAID controllers for AIX, SAS RAID controllers for IBM i, or SAS RAID controllers for Linux topics for more information and important considerations for multi-initiator and high availability or dual storage IOA configurations.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 162
(LC) and utilize shortwave laser optics. The adapter operates at link speeds of 4, 8 and 16 Gbps and will automatically negotiate to the highest speed possible. LEDs on each port provide information on the status and link speed of the port. The adapter connects to a Fibre Channel switch at 4 Gb, 8 Gb or 16 Gb.
Page 163
00E3496 (Designed to comply with RoHS requirement) Wrap plug FRU number 12R9314 Note: The wrap plug is included with the card, and can also be purchased from IBM. I/O bus architecture PCIe base and CEM 3.0, x8 PCIe bus interface...
Page 164
Because core sizes are different, OM1 cables can only be connected to other OM1 cables. For best results, OM2 cables must not be connected to OM3 cables. However, if an OM2 cable is connected to an OM3 cable, the characteristics of the OM2 cable apply to the entire length of the cables. The following table shows the supported distances for the different cable types at the different link speeds.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 166
v The adapter is compliant with the PCIe base and Card Electromechanical (CEM) 2.0 specifications with the following characteristics: – Provides an x8 lane link interface at 14.025 Gbps, 8.5 Gbps, or 4.25 Gbps (automatic negotiation with system) – Provides support for one Virtual Channel (VC0) and one Traffic Class (TC0) –...
Page 167
000E9283 (Designed to comply with RoHS requirement) Wrap plug FRU number 12R9314 Note: The wrap plug is included with the card, and can also be purchased from IBM. I/O bus architecture PCIe base and CEM 3.0, x8 PCIe bus interface...
Page 168
The following table shows the supported distances for the different cable types at the different link speeds. Table 48. Supported distances for cables Header Cable type and distance Rate 4 Gbps 0.5 - 70 m (1.64 - 0.5 - 150 m (1.64 - 0.5 - 380 m (1.64 - 0.5 - 400 m (1.64 - 229.65 ft)
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 170
Wrap plug FRU number 12R9314 (for Fibre LC connector) 10N7405 Note: These wrap plugs are not included with the card. 12R9314 (FC ECW0) is the only wrap plug that can be purchased from IBM. I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 172
I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V, 12 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 174
Wrap plug FRU number 74Y7010 10N7405 Note: These wrap plugs are not included with the card. 12R9314 (FC ECW0) is the only wrap plug that can be purchased from IBM. I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/...
Page 175
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
PCIe3 LP 4-port (10 Gb FCoE and 1 GbE) Copper and RJ45 Adapter (FC EN0L; CCIN 2CC1) Learn about the specifications and operating system requirements for the feature code (FC) EN0L adapter. Overview The PCIe3 LP 4-port (10 Gb FCoE and 1 GbE) Copper and RJ45 Adapter is a PCI Express (PCIe) generation 3, low-profile adapter.
Page 177
Wrap plug FRU number 74Y7010 10N7405 Note: These wrap plugs are not included with the card. 12R9314 (FC ECW0) is the only wrap plug that can be purchased from IBM. I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/...
Page 178
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
PCIe3 4-Port (10 Gb + 1 GbE) SR+RJ45 Adapter (FC EN0S; CCIN 2CC3) Learn about the specifications and operating system requirements for the feature code (FC) EN0S adapter. Overview The PCIe3 4-Port (10 Gb + 1 GbE) SR+RJ45 Adapter is a PCI Express (PCIe) generation 3 (Gen3) x8, short form-factor, low-profile capable, full-height adapter.
Page 180
Hazardous Substances in Electrical and Electronic Equipment Figure 74. PCIe3 4-Port (10 Gb + 1 GbE) SR+RJ45 Adapter Note: The ports are numbered from top to bottom as T1, T2, and so on for the AIX and IBM i operating systems.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 182
Overview The PCIe3 LP 4-Port (10Gb+1GbE) SR+RJ45 Adapter is a PCI Express (PCIe) generation 3 (Gen3) x8, short form-factor, low-profile adapter. The adapter provides two 10 Gb SR optical ports and two 1 Gb RJ45 ports. This adapter provides a PCIe 3.0 host bus interface. The adapter supports the Ethernet network interface controller (NIC) function.
Page 183
12R9314 (SFP+ SR wrap plug) 10N7405 (1 Gb UTP wrap plug) Note: These wrap plugs are not included with the card. 12R9314 (FC ECW0) is the only wrap plug that can be purchased from IBM. I/O bus architecture PCIe3 x8...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 185
adapter is a high-performance adapter that consolidates traffic for networking. The link aggregation and failover features of the adapter make it suitable for critical network applications that require redundancy and high availability. The two 10 Gb are SFP+ and do not include a transceiver. Active Copper twinax cables up to 5 meter in length are supported such as provided by feature codes EN01, EN02 or EN03.
Page 186
Low-profile tailstock part number: 00E2720 Wrap plug FRU number 74Y7010 (Twinax wrap plug) 10N7405 (1 Gb UTP wrap plug) Note: Wrap plugs are not included with the card and cannot be purchased from IBM. I/O bus architecture PCIe2 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/...
Page 187
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
This adapter requires the following drivers: v AIX: devices.pciex.e4148a1614109304 for SFP+ optical ports and devices.pciex.e4148a1614109404 for RJ45 ports v Linux: bnx2x driver PCIe2 LP 4-port (10 Gb + 1 GbE) Copper SFP+RJ45 Adapter (FC EN0V; CCIN 2CC3) Learn about the specifications and operating system requirements for the feature code (FC) EN0V adapter.
Page 189
Low-profile tailstock part number: 00E2720 Wrap plug FRU number 74Y7010 (Twinax wrap plug) 10N7405 (1 Gb UTP wrap plug) Note: Wrap plugs are not included with the card and cannot be purchased from IBM. I/O bus architecture PCIe2 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 191
link aggregation and failover features of the adapter make it suitable for critical network applications that require redundancy and high availability. Figure 79 on page 176 shows the FC EN0W adapter. The ports default to auto negotiate the highest speed either at 10 Gb (10G BaseT), 1Gb (1000 BaseT), or 100 Mb (100 BaseT) full duplex.
Page 192
Regular-height tailstock part number: 00E2862 Low-profile tailstock part number: 00E2721 Wrap plug FRU number 10N7405 (RJ45 wrap plug) Note: Wrap plugs are not included with the card and cannot be purchased from IBM. I/O bus architecture PCIe2 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/...
The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 194
00E2714 (Designed to comply with RoHS requirement) Low-profile tailstock part number: 00E2721 Wrap plug FRU number 10N7405 (RJ45 wrap plug) Note: Wrap plugs are not included with the card and cannot be purchased from IBM. I/O bus architecture PCIe2 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 196
Figure 81. PCIe2 LP 8 Gb 4-port Fibre Channel Adapter Table 57. LED indications Hardware State Yellow LED (8 Gbps) Green LED (4 Gbps) Amber LED (2 Gbps) Comments Power Off Power On (before firmware initialization) Power On (after Flash Flash Flash All flash at the same...
Page 197
Wrap plug FRU number 12R9314 Note: The wrap plug is included with the card, and can also be purchased from IBM. I/O bus architecture PCIe2.0 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/...
The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 199
I/O bus architecture PCIe3 x16. Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on.. Voltage 3.3 V, 12 V.
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 201
I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V, 12 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 203
I/O bus architecture PCIe2.0 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V, 12 V...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 206
v FC EN16: PCIe3 LPX 4-port 10 GbE SR Adapter The PCIe3 4-port 10 GbE SR Adapter is a PCI Express (PCIe) generation 3, x8, short form-factor adapter. The adapter provides four 10 Gb small form-factor pluggable (SFP+) optical SR transceiver ports, as shown in Figure 86 on page 191.
Page 207
00ND466 (Designed to comply with RoHS requirement) Full-height tailstock part number: 00ND462 Wrap plug FRU number 12R9314 (SFP+ SR wrap plug) Note: The wrap plug is not included with the card, but can be purchased from IBM. I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/...
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Page 209
v FC EN17: PCIe3 4-port 10 GbE SFP+ Copper Adapter v FC EN18: PCIe3 LPX 4-port 10 GbE SFP+ Copper Adapter The PCIe3 4-port 10 GbE SFP+ Copper Adapter is a PCI Express (PCIe) generation 3, x8, short form-factor adapter. The adapter provides four 10 Gb small form-factor pluggable (SFP+) ports into which copper twinax transceivers will be placed.
Page 210
I/O bus architecture PCIe3 x8 Slot requirement For more information about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER9/ p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on. Voltage 3.3 V Form factor...
Page 211
IBM SSIC (System Storage Interoperation Center)(http://www-03.ibm.com/systems/support/storage/ ssic/interoperability.wss). v The latest version of the device driver or the IBM Power RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/home.html). v For more information on Linux support, see the Linux Alert website(www14.software.ibm.com/ webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html).
Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead.
All IBM prices shown are IBM's suggested retail prices, are current and are subject to change without notice. Dealer prices may vary. This information is for planning purposes only. The information herein is subject to change before the products described become available.
This product uses standard navigation keys. Interface information The IBM Power Systems servers user interfaces do not have content that flashes 2 - 55 times per second. The IBM Power Systems servers web user interface relies on cascading style sheets to render content properly and to provide a usable experience.
IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the web at Copyright and trademark information at www.ibm.com/legal/copytrade.shtml.
Page 217
European Community contact: IBM Deutschland GmbH Technical Regulations, Abteilung M456 IBM-Allee 1, 71139 Ehningen, Germany Tel: +49 800 225 5426 email: halloibm@de.ibm.com Warning: This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Page 218
This statement explains the JEITA statement for products greater than 20 A per phase, three-phase. Electromagnetic Interference (EMI) Statement - People's Republic of China Declaration: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may need to perform practical action.
Page 219
Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung von IBM verändert bzw.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Proper cables and connectors are available from IBM-authorized dealers. IBM is not responsible for any radio or television interference caused by unauthorized changes or modifications to this equipment.
Page 221
This product is in conformity with the protection requirements of EU Council Directive 2014/30/EU on the approximation of the laws of the Member States relating to electromagnetic compatibility. IBM cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the fitting of non-IBM option cards.
Page 222
Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung von IBM verändert bzw.
Permissions for the use of these publications are granted subject to the following terms and conditions. Applicability: These terms and conditions are in addition to any terms of use for the IBM website. Personal Use: You may reproduce these publications for your personal, noncommercial use provided that all proprietary notices are preserved.