Table of Contents
Advertisement
Example 2
This example shows how to change the default terminal table for a 3161/62/63 as
follows:
• Change the ENTER function from the return key to the send key.
• Assign the NEWLINE function to the return key.
The send key on the 3161/62/63 sendsthe following characters: ESC! 8 LTA. The
ASCII! character
(X'
21') must be defined as the intermediate control sequence
character. (See the address X' 04' description on page 15-10.)
Since the default terminal tables for the 3161/62/63 contain the ASCII! character as
the intermediate control sequence character, this character need not
be
changed for
the user-defined terminal table.
The LTA (line turnaround) character is set from the 3161/62/63 setup menu. Since
LT A is sent after the character sequence, an X' 80' must be added to the function
number to tells the 3708 to ignore the LTA character. (See the special
considerations for the keyboard mapping section on page 15-12.)
To change the key functions described for this example, do the following:
1.
Use default terminal ID 02 (3161/62/63).
2. Type the terminal ID of one of the available user-defined terminals. Up to six
can be defined. The choices are 20 through 25. The selected number is
displayed on the 3708 logon screen along with the default terminal types.
3. Display address X' 5E' , which is the send key sequence. The data is displayed
as follows:
C125.1
3708 USER DEFINED TERMINAL 02 TABLE
TYPE ADDRESS AND PRESS "ENTER": 05E
CURRENT DATA DISPLAY :
0708 3333 330B 3333 0022 2325 2433 3333
TYPE ANY DESIRED CHANGES TO DATA BELOW AND THEN PRESS "ENTER"
0708 3333 330B 3333 0022 2325 2433 3333
PRESS "PF6" TO UPDATE MASTER COPY OF TABLE
PRESS "ENTER" TO CONTINUE OR "PF2" TO QUIT
4BMYJOB
P 00
15-22
3708 Planning and Installation
Advertisement
Table of Contents
