Advertisement
Quick Links
856-129808-101-00
N8101-601F/602F/603F/604F/605F
The User's Guide is intended to allow you to install and use the Xeon Processor Kit.
N8101-601F/602F/603F/604F/605F
Read this manual thoroughly before handling the Kit.
In addition, refer to this guide whenever you want to know how to use the Kit or some
malfunction occurs. Always keep this guide at hand so that you can see it when necessary.
For the server in which the Kit is installed, refer to the User's Guide of the server.
Read "Notes on Use" carefully before handling the Kit.
Indicates the presence of a hazard that may result in death or serious personal injury.
When you install the option or delete it, unplug the power
cord and extract the cable that has connected to another
one.
Otherwise, an electric shock or fire may be caused.
Do not disassemble, repair, or modify the server. Otherwise,
an electric shock or fire may be caused.
Keep this manual carefully along with the product
Xeon Processor Kit
User's Guide
correctly and safely.
WARNING
Unplug the power
cord!
Precaution against
electric shock
Prohibition of
disassembly
Indicates that
improper use
may cause fire.
Precaution
against electric
shock
Advertisement
Related Manuals for NEC N8101-601F
Summary of Contents for NEC N8101-601F
- Page 1 856-129808-101-00 Keep this manual carefully along with the product N8101-601F/602F/603F/604F/605F Xeon Processor Kit User’s Guide The User's Guide is intended to allow you to install and use the Xeon Processor Kit. N8101-601F/602F/603F/604F/605F correctly and safely. Read this manual thoroughly before handling the Kit.
-
Page 2: Notes On Use
856-129808-101-00 Notes On Use Please be sure to protect the following notes after picking out this product from a box. Do not use the server in the place where dust, water or liquid may pour. Do not use the server in the place where the strong electromagnetic waves generate ... - Page 3 856-129808-101-00 Introduction This processor kit is that used on Express5800/E120d-M. ･N8101-601F:Intel®Xeon® processor E5-2407 clock 2.20GHz 4c/4t 80W ･N8101-602F:Intel®Xeon® processor E5-2430 clock 2.20GHz 6c/12t 95W ･N8101-603F:Intel®Xeon® processor E5-2430L clock 2GHz 6c/12t 60W ･N8101-604F:Intel®Xeon® processor E5-2450L clock 1.80GHz 8c/16t 70W ･N8101-605F:Intel®Xeon® processor E5-2470 clock 2.30GHz 8c/16t 95W...
- Page 4 856-129808-101-00 Install the Xeon Processor Kit 1．Preparation point to be checked You need to remove server module when installing the processor : Lift the lever while pushing the locking mechanism toward right. Hold the handle, and pull out the server module horizontally,.
- Page 5 856-129808-101-00 Remove the protective cover from the CPU socket. Note Keep the removed protective cover for future use. Push down the socket lever once to unlatch it from the hook, then slowly open the lever until it stops. Lift the plate. Important Do not touch the socket contacts.
- Page 6 856-129808-101-00 Put the additional processor on the CPU socket slowly and gently. For easy installation, hold edges of processor with your thumb and index fingers so that the notch is aligned with the key on the CPU socket. Important Be sure to hold the processor only at the edges. Pay attention not to touch the bottom of the processor (pin section).
- Page 7 856-129808-101-00 Put the heat sink on the processor and fix the heat sink with four screws. Temporarily tighten the four screws diagonally, then tighten them securely. Make sure that the screw aligns with the screw hole. If not, the screw may damage the motherboard. ...
- Page 8 11. Run BIOS Setup Utility (SETUP) to confirm the following settings. Refer to Chapter 2 (1. System BIOS) in "Maintenance Guide". Advanced Processor Configuration Processor Information [CPU ID] [L2 Cache RAM] [L3 Cache RAM] N8101-601F/602F/603F/604F/605F Xeon Processor Kit User’s Guide *856-129808-101-00S* *856-129808-101-00*...