Table of Contents
Advertisement
Chapter 2
Before You Begin
•
•
Optional Tools and Hardware That You Supply
Tools and materials that are user-supplied are:
•
•
•
•
•
•
•
•
•
•
•
•
Pole Installation Hardware and Tools
To install the access point on a vertical or horizontal metal, wood, or fiberglass pole, you need the
following additional hardware and tools:
•
•
•
•
Optional pole mount kit (AIR-ACCPMK1550=, AIR-ACCPMK1550HZM=)
Optional banding strap tool (BAND IT) (AIR-BAND-INST-TL=)
Ground lug crimping tool (Panduit CT-720 with CD-720-1 die)
6-AWG copper ground wire
13 mm box-end wrench or socket set
Adjustable wrench, 22 mm socket, or Sealcon S-2200-WR socket wrench
#8 Torx screwdriver
Torque Wrench (ft-lbs)
Small flat screwdriver for DC power connector
Optional shielded outdoor-rated Ethernet (CAT5e or better) cable with 0.20 to 0.35 in
(0.51 to 0.89 cm) diameter
Optional Ethernet RJ-45 connector and installation tool
Optional shielded outdoor-rated DC power cable with 0.20 to 0.35 inch (.0.51 to 0.89 cm) diameter
Optional ground rod, as required by local regulations
Optional ladder, power lift, rope, or other tools as required
Pole mount kit (AIR-ACCPMK1550=, AIR-ACCPMK1550HZM=)
–
Pole clamp bracket
–
Two gusset strap brackets
One mounting bracket
–
Twelve hex bolts (M8 x16)
–
One M8 flange nut
–
Six M8 flat washers
–
Ten M8 split lock washers
–
Two stainless steel mounting straps
–
Customer banding strap tool (BAND IT)—(AIR-BAND-INST-TL=)
Customer-supplied 13-mm and box-end wrench or socket set
Customer-supplied adjustable wrench, 22 mm socket, or Sealcon S-2200-WR socket wrench
Cisco Aironet 1552 Series for Hazardous Locations Installation Guide
Tools and Hardware
2-31
Advertisement
Table of Contents
