Display Problems - Toshiba Tecra A8 User Manual
Toshiba user's guide laptop pc tecra a8
Hide thumbs
Also See for Tecra A8:
- Maintenance manual (428 pages) ,
- User manual (276 pages) ,
- User manual (205 pages)
Table of Contents
Advertisement
220
If Something Goes Wrong
Resolving a hardware conflict
Nothing happens when you press the keys on the
external keyboard.
You may have plugged the external keyboard in while the
computer was turned on. Click Start, Shut Down or Turn off
computer, and Restart the computer using the TouchPad on
the internal keyboard. The computer will restart and
recognize the device.
Display problems
Here are some typical display problems and their solutions:
The screen is blank.
Display Auto Off may have gone into effect. Press any key to
activate the screen.
You may have activated the instant password feature by
pressing
password, press any key, type the password and press
no password is registered, press any key. The screen
reactivates and allows you to continue working.
If you are using the built-in screen, make sure the display
priority is not set for an external monitor. To do this, press
and
F5
problem, press
display priority to its previous setting.
If you are using an external monitor:
❖
Check that the monitor is turned on.
❖
Check that the monitor's power cord/cable is firmly
plugged into a working power outlet.
❖
Check that the cable connecting the external monitor to
the computer is firmly attached.
and
simultaneously. If you have registered a
Fn
F1
simultaneously (once). If this does not correct the
and
Fn
HINT: Holding the Fn key and pressing the F5 key several
times will advance you through the display options.
simultaneously again to return the
F5
. If
Enter
Fn
- Quick Links:
- Adding Memory (Optional)
Hide quick links:
Advertisement
Table of Contents
