Table of Contents
Advertisement
➤
To call/monitor a door phone
1. With the handset off-hook, press a extension. You hear dial tone and the LED
flashes green (in-use).
2. Press
your telephone and the called door phone. You can audibly monitor the area around
the door phone.
➤
To call from a door phone
1. Press the door phone button and then release it. You hear a distinctive ringing
tone–one or five times (set in system programming).
2. When answered, speak at a normal voice level in the direction of the door phone.
Emergency Ringdown
If a station remains off-hook for a programmable period, it can be automatically
treated as an Emergency Call and directed to an emergency destination. The station
may have partially dialed a number or have dialed no digits at all. Each station is
programmed with its specific emergency ringdown destination.
A station number or a group pilot number can be specified as an emergency ringdown
destination. In a private network, the station or pilot number must be in the same
network node. Remote emergency destination and door phones are not permitted.
Override Calls
The available override features are:
Busy Override
Ring Over Busy Override enables you to send a muted ring tone to a busy station to
indicate a call is waiting. The Busy Override (BOV) muted ring can be programmed
for each station to be two muted rings only or continued muted rings until the call is
answered. This option applies to the station receiving the muted ring. The muted ring
can be sent to the telephone speaker or to the telephone handset/headset and speaker.
Strata CTX DKT3001/2001 Digital Single Line Telephone
+ extension for the door location. A two-way talk-path exists between
01/02
Advanced Operation
Emergency Ringdown
31
Advertisement
Table of Contents
