Čítačka Kariet Sd; Removing Sd Card Reader - Dell Precision 7550 Service Manual
Hide thumbs
Also See for Precision 7550:
- Service manual (102 pages) ,
- Setup and specifications manual (45 pages) ,
- Connection manual (10 pages)
Table of Contents
Advertisement
Steps
1. Place the touchpad buttons into its slot in the palmrest.
2. Replace the two (M2x2.5) screws to secure the touchpad buttons to the palmrest
3. Connect the touchpad buttons cable to the connector in the touchpad.
Next steps
1. Install the
inner
frame.
2. Install the
primary M.2
SSD.
3. Install the battery.
4. Install the
base
cover.
5. Install the
SD
card.
6. Follow the procedure in
Čítačka kariet SD
Removing SD card reader
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
primary M.2
6. Remove the
WWAN
card.
7. Remove the
WLAN
card.
8. Remove the
inner
frame.
About this task
The figure indicates the location of the SD card reader and provides a visual representation of the removal procedure.
Steps
1. Disconnect the SD card reader cable from the connector on the system board.
after working inside your
computer.
before working inside your
SSD.
computer.
Demontáž a opätovná montáž
55
Advertisement
Table of Contents
