Table of Contents
Advertisement
Quick Links
FRONT BASE
LENGTH: 3.0m
SIDE BASE
LENGTH: 0.78m
FRONT WALL
HEIGHT: 1.8m
REAR WALL
HEIGHT: 1.95m
We thank you for choosing an Australian made shed. For further assistance please
visit our detailed instructional video library at
Http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be number ONE, so please let us
know what you think of our instructions. Feedback makes us better.
feedback@absco.com.au
ABSCO INDUSTRIES
Absco Space Saver Shed
Assembly Instructions
Model: J30082SK
ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16
WHEN LAYING YOUR CONCRETE
SLAB, CHAMFER THE 50mm EDGES
DOWNWARDS BY 10mm.
50mm
THIS WILL ENSURE THAT
WATER RUN OFF IS KEPT
CLEAR FROM YOUR SHED
10mm
PAGE 1
Advertisement
Table of Contents
Related Manuals for ABSCO SHEDS J30082SK
Summary of Contents for ABSCO SHEDS J30082SK
- Page 1 Http://www.abscosheds.com.au/watch-videos At ABSCO Industries we are always looking to be number ONE, so please let us know what you think of our instructions. Feedback makes us better. feedback@absco.com.au ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 1...
-
Page 2: General Instructions
Do not erect your shed in windy conditions, ensure that the shed is securely anchored to a solid foundation immediately after construction is completed. · It is highly recommended to erect the shed with two or more people. ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 2... - Page 3 L = 1496.5mm (58.9") L = 1496.5mm (58.9") 81BL 81BR CHANNEL CHANNEL L = 1496.5mm (58.9") L = 1496.5mm (58.9") 81AL 81AR CHANNEL CHANNEL L = 1496.5mm (58.9") L = 1496.5mm (58.9") ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 3...
-
Page 4: Component Description
STEEL SHEET 865mm X 773mm CHANNEL L = 1725mm STEEL SHEET 1785mm X 711mm CHANNEL L = 773mm STEEL SHEET 1725mm X 773mm JAMB L= 1785mm STEEL SHEET 1725mm X 773mm ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 4... - Page 5 PADBOLTS TO DOOR HASP SHEET 3mm POP RIVETS SECURE 4mm CSK SCREW & HINGES TO DOOR NUT SECURE HINGES (ALTERNATIVE FIXING TO DOOR METHOD) DOOR ASSEMBLY STRAP INSTRUCTIONS L: 165mm ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 5...
- Page 6 CSJ positioned equally inside of the channel at the center of the CSJ joined channels. (on an angle). Push the CSJ into the channel until you here a 'click'. CHANNEL HIGH-SIDE LOW-SIDE 20mm 15mm CHANNEL ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 6...
- Page 7 2 X 81AL 1 x 81B 1 X 55AR 1 X 55AL 1 X 55CR 1 X 55CL 1 X 55BR 1 X 55BL 1 X 81BR 1 X 81BL ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 7...
- Page 10 Do not join components together at this location yet, as the screw may obstruct further assembly of other components ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 10...
- Page 11 DOOR PANEL ASSEMBLY DOOR PANEL ASSEMBLY ALL VERTICAL DOOR CHANNELS ARE INSTALLED IN THE REVERSE DIRECTION IN COMPARISON TO HORIZONTAL DOOR CHANNELS 20mm FLANGE 15mm FLANGE FOUR HOLE SET FOR PADBOLT CONNECTION ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 11...
-
Page 12: Rear Panel Assembly
Absco Space Saver Shed Model: J30082SK REAR PANEL ASSEMBLY ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 12... - Page 13 Absco Space Saver Shed Model: J30082SK SIDE PANEL ASSEMBLY (TWO REQUIRED) ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 13...
- Page 14 Absco Space Saver Shed Model: J30082SK ROOF PANEL ASSEMBLY ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 14...
-
Page 15: Front Panel Assembly
Absco Space Saver Shed Model: J30082SK FRONT PANEL ASSEMBLY ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 15... -
Page 16: Door Panel Assembly
NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm holes and secure with screws ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 16... - Page 17 The top channel of each panel is pre-punched for attaching roof sheets. The base channels are not pre-punched. SIDE WALL PANEL CHANNELS FIT INTO THE NOTCHED FRONT AND REAR WALL PANEL CHANNELS ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 17...
- Page 18 - EACH ANCHOR CONSISTS OF ONE NUT, BOLT, DYNABOLT AND STEEL ANGLE SLAB - DRILL A 10mm HOLE INTO THE WALL SHEET - DRILL A 10mm HOLE INTO THE CONCRETE DYNABOLT ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30082SK 23/11/16 PAGE 18...