Fan - HP Envy 13 Series Maintenance And Service Manual
Pc
Hide thumbs
Also See for Envy 13 Series:
- User manual (95 pages) ,
- Maintenance and service manual (82 pages) ,
- Maintenance and service manual (74 pages)
Table of Contents
Advertisement
Fan
Table 5-7
Fan description and part number
Description
Fan
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
To remove the fan:
NOTE:
On select products, the size and shape of the Mylar cover may vary from the illustration.
1.
Pull back the Mylar cover to access the fan (1).
2.
Disconnect the fan cable from the system board (2).
3.
Remove the two Phillips M2.0 × 2.0 screws (3) that secure the fan to the computer.
4.
Remove the fan from the computer (4).
Reverse this procedure to install the fan.
(Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page
39).
Spare part number
L94043-001
37).
38).
Component replacement procedures
47
Hide quick links:
Advertisement
Table of Contents
