hit counter script

When An Operation Is Prohibited; To Protect The Lcd Screen; For Viewing Lcd Comfortably; What The Marks On Dvds Indicate - Pioneer AVH-P5700DVD Operation Manual

In-dash touchsreen 6.5" lcd multimedia unit dvd/cd receiver with built-in 6.5" touchscreen display
Hide thumbs Also See for AVH-P5700DVD:
Table of Contents

Advertisement

C_B_e_fo_r_e_~_o_u_St_a_rt
~)
Section
C~
~).
Mark
Meaning
When an operation is prohibited
When you are watching a DVD and attempt to
perform an operation, it may not be performed
because of the programming on the disc.
When this happens, the icon (S) appears on
the screen.
• The icon
(9
may not appear with certain'
discs. [!J
Indicates the number of the region
where playback is possible.
Indicates the picture size (aspect ratio:
screen width-to· height ratio) type,
Resetting the microprocessor
Pressing RESET lets you reset the micropro-
cessor to its initial settings.
The microprocessor must be reset under the
following conditions:
Prior to using this un it for the fi rst time
after installation
• If the unit fails to operate properly
• When strange or incorrect messages ap-
pear on the display
.
What the marks on DVDs
indicate
For viewing
LCD comfortably
Due to its construction, the view angle of the
LCD screen is limited. The viewing angle (verti-
cal and horizontal) can be increased, however,
by using BRIGHT to adjust the black density of
the video. When using for the first time, adjust
the black density in accordance with the view-
ing angle (vertical and horizontal) to adjust for
clear viewing. DIMMER can also be used to
adjust the brightness of the LCD screen itself
to suit your personal preference. [!J
To protect the LCD screen
Do not allow direct sunlight to fallon the
display when this unit is not being used.
Extended exposure to direct sunlight can
result in LCD screen malfunction due to
the resulting high temperatures.
• When using a portable phone, keep the an-
tenna of the portable phone away from the
display to prevent disruption of the video by
the appearance of spots, colored stripes,
etc.[!J
The marks below may be found on DVD disc
labels and packages. They indicate the type of
images and audio recorded on the disc, and
the functions you can use.
1
Turn the ignition switch OFF.
Mark
Meaning
(})))
Indicates the number of audio sys-
tems.
Indicates the number of subtitle lan-
guages.
Indicates the number of viewing an·
gles.
En
®

Advertisement

Table of Contents
loading

Table of Contents