Table of Contents
Advertisement
Preparing for surround sound
• Press the FRONT key each time to select Front L or Front R
channel.
• Press the CENTER or SW key to select center or subw oofer
channel.
• Press the REAR key to select surround channel.
And use the REAR key for the follow ing displays.
1 LS : Surround L channel.
2 BS : Back surround channel.
3 RS : Surround R channel.
4 Press the SET UP key again.
• The test tone is turned off and return to the main setup displays.
6
Input the distance to the speakers.
1 M easure the distance from the listening position to each of
the speakers.
Jot dow n the distance to each of the speakers.
Distance to Front left speaker (L)
Distance to Center speaker (C)
Distance to Front right speaker (R) : ____ meters
Distance to Surround right (RS)
Distance to Back Surround (BS)
Distance to Surround left (LS)
Distance to Subw oofer (SW)
2 Press theTRIM %/ fi keys to select the "DISTANCE" on setup
displays and press the SETUP key again.
3 Use the SET UP key to select the speakers and the TRIM %/ fi
keys to adjust the distance to the front speakers.
The speaker indicator to be adjusted blinks.
DOLBY DEX
NEO:6
DSP
TS
MUTE
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
• The allow able setting range is 0.3 to 9.0 m, adjustable in 0.3 m
increments.
4 Repeat steps 3 to input the distance for each of the speakers.
5 Press the SET UP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
: ____ meters
: ____ meters
: ____ meters
: ____ meters
: ____ meters
: ____ meters
DIGITAL
ST.
L
AUTO
LFE
LS S BS RS
C
R
SW
17
EN
Advertisement
Table of Contents
