Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION
Open the battery compartment cover underneath the scale.
1
Insert 1x CR2032
2
battery compartment.
3
Close the battery compartment cover. Place the appliance on an even and firm surface.
Notes:
• If the battery level is low,
same type.
• Remove the battery if the scale is not to be used for a long period of time, as battery
leakage may cause damage.
OPERATION
Using the scale without a container
Switching on: Press the ON/TARE key.
4
Wait until appears on the display. The scale is now ready for use.
5
Place the foodstuff to be weighed directly on the weighing platform. The weight of the
6
foodstuff appears on the display.
Using the scale without a container
Put a suitable container (not provided) on the switched-off scale. Press the ON/TARE
7
key to switch the scale on.
Wait until appears on the display . The appliance is now ready for use. Place the
8
foodstuff to be weighed directly on the weighing platform. The weight of the foodstuff
appears on the display.
• Switching off (automatically): After about 1 minute of inactivity.
• Switching off (manually): Press and hold the ON/TARE key for a few seconds until the
display goes off.
Toggling between weight units
Press the ON/TARE key. Then, press UNIT key.
9
Press the UNIT key repeatedly to toggle between weight units (grams, ounces, pounds,
10
millilitres).
100_A6_140320 (1.4).indb 13
13
battery (provided) with the + polarity facing upwards into the
will appear on the display. Replace with a new battery of the
EN
20/3/14 7:54
Advertisement
Table of Contents
