hit counter script
2N Lift8 User Manual
  1. Manuals
  2. Brands
  3. 2N Manuals
  4. Cell Phone
  5. Lift8
  6. User manual

2N Lift8 User Manual

Communicator for lifts
Hide thumbs Also See for Lift8:
Table of Contents

Advertisement

Quick Links

Download this manual
Firmware
1.0.0
Version
1.0.0
®
2N
Communicator for lifts
User manual
Lift8
 
www.2n.cz

Advertisement

Table of Contents
loading

Related Manuals for 2N Lift8

Summary of Contents for 2N Lift8

  • Page 1 ® Lift8 Communicator for lifts User manual Firmware 1.0.0 Version 1.0.0 www.2n.cz  ...
  • Page 2 2N TELEKOMUNIKACE administers the FAQ database to help you quickly find information and to answer your questions about 2N products and services. On www.faq.2n.cz you can find information regarding products adjustment and instructions for optimum use and procedures „What to do if...“.

  • Page 3: Table Of Contents

    1. Introduction of product ......5 1.1 Product description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6   1.2 Components of system 2N® Lift8 and associated products  . . . . . . . . . . . . . . . .  8   1.3 Changes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16  ...
  • Page 4 8. Communicator ........140 8.1 Installation and Login  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  141  ...

  • Page 5: Introduction Of Product

    Here is an overview of everything you will find in the chapter: 1.1 Product description 1.2 Components of system 2N® Lift8 and associated products 1.3 Changes 1.4 Abbreviations, expressions and pictograms used ®...

  • Page 6: Product Description

    It also has a USB interface which serves for the comfortable configuration of parameters, for the recording of announcements and program upgrade. The CU can be connected via: GSM, UMTS, or PSTN. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 7 System diagram Main bus Audio unit bus Picture 1.1: Example of connection of Central Unit, splitters and announcers of system 2N® Lift8 ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 8: Components Of System 2N® Lift8 And Associated Products

    Components of system Notification The components of the system Lift8 cannot be used outside this system. Announcers cannot be connected to a telephone line without a central unit! When the system is connected into several shafts, it is not possible to connect the announcers without a central unit and splitters.
  • Page 9 Serves for connection of central unit with announcers of given lift. ® 918610E, 918610EX 2N Lift8 Announcer – cabin universal (normal version, cable version - contains LED, microphone and speaker connected to cables) Electronics of announcer for building into lift cabin. Including speaker and microphone (handsfree).
  • Page 10 PC. It is equipped with a contact for connection of an external siren. This announcer can be configured as common for several lifts (shafts). Robust cover in yellow. ® 918612E 2N Lift8 Announcer – shaft ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 11 Handsfree mode, Alarm button and triphony, indication elements, It is not intended for use in the cabin. ® 918620E 2N Lift8 I/O module Contains logical inputs and switch relays. ® 918650E 2N Lift8 Module GSM ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 12 For connection of central unit via mobile network. Data connection for remote system configuration is also possible. ® 918651E 2N Lift8 Module UMTS ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 13 For connection of central unit via mobile network. Data connection for remote system configuration is also possible. ® 918652E 2N Lift8 Module PSTN For connection of central unit via analogue line. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 14 For connection of central unit via analogue line. ® Cooperating 2N Lift8 applications ® 918700E 2N Lift8 Service tool ® The application Lift8 Service Tool is intended for remote supervision and ® configuration of Lift8 Communicators ® 918700E 2N Lift8 Control panel ®...
  • Page 15 ® 918700E 2N Lift8 Communicator ® The application Lift8 Communicator is intended for receiving emergency calls by dispatcher. ® 918700E 2N Lift8 Server ® The application Lift8 Server processes the control calls and mediates communication between the central units and PC applications.

  • Page 16: Changes

    1.3 Changes The below table summarises the changes made in the individual versions. Manual version Description of changes In firmware 1.0.0 1.0.0 basic version ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 17: Abbreviations, Expressions And Pictograms Used

    ® call from central unit on line for taking of control calls registered in 2N check call Lift8 Server or other defined number internal communication between announcers, usually between all...
  • Page 18 Important information for system functionality. Useful information for quick and efficient functionality. Note Routines or advice for efficient use of the device. Prepared functions, new properties The grey text in the manual indicates prepared functions or newly developed properties ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 19: Description And Installation

    2.1 Central unit PSTN/GSM/UMTS 2.2 Splitter 2.3 Announcer – cabin universal 2.4 Announcer – machine room 2.5 Announcer – shaft 2.6 PSTN module 2.7 GSM/UMTS module Each sub-chapter contains: Description of components Before you start Fitting Electrical wiring ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 20: Central Unit Pstn/Gsm/Umts

    2.1 Central unit PSTN/GSM/UMTS Description Central unit ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 21 Indication elements of central unit Picture 2.1: Indication elements of central unit ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 22 Connectors of central unit Picture 2.2: Central unit connectors Reset button and USB connector On the right side of the CU is a USB connector and reset button (see picture). Reset button function: ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 23 The upright position with the cable openings at the top (upside down) is forbidden! After mounting the CU check that the equipment is firmly fixed in place and that it cannot come loose and drop down the shaft. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 24 Put the upper cover back on the and tighten the screws which hold the cover. Before putting the cover on, check to see that the earthing wire is connected to the cover! Connect the power cable to a 230V socket. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 25 Put the upper cover back on the CU and tighten the screws which hold the cover. Before putting the cover on, check to see that the earthing wire is connected to the cover! Connect the CU power cable to a 230V socket. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 26 Connection of bus between splitter and CU We connect the central unit and splitter using the 6-wire main bus (power + - , audio + - , data + - ). You must maintain the polarity. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 27 (for example, power wire, videosignal etc.). Recommendation: Do not run the bus near power wires, especially long sections. The bus can be forked, in particular if this makes the overall length of all sections shorter. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 28 The used PBX must be functional even during a power cut. For larger PBX there is commonly a backup source, and for smaller ones a certain exchange is usually connected directly to the PSTN when there is a power failure. Discuss this case ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 29 If a prepaid SIM card is used, ensure that the credit is monitored and topped up in time. UMTS This is used in particular where it is not possible to connect up to the PSTN line. If Lift8 is connected using UMTS, the system can be configured remotely using the service tool program.
  • Page 30 ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 31: Splitter

    The splitters are connected in series, i.e.., one after the other. It is not possible to connect them in parallel. The system Lift8 would be unstable. On the last splitter (furthest from the central unit) the termination resistance (jumper) is connected.
  • Page 32 Warning It is necessary to adhere to the polarity of connection. Otherwise the system Lift8 will not work properly. Connection of bus between announcers and splitter We connect the splitter and announcers using a two-wire bus. We must maintain the...
  • Page 33 Caution This function may be mandatory, which depends on regulations valid in the given country and time when you perform the installation. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 34 This is used on the last splitter which is connected in the system. (it is the furthest from the CU). The jumper has a factory setting in the switched off position for the termination resistance. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 35: Announcer - Cabin Universal

    The location of all these elements must correspond to regulations. There must be free space of at least 65×130×20 mm behind the panel. Checking packaging of product Before starting installation, check to see whether the packaging of the product is complete. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 36 Mounting of electronics This announcer is intended for mounting behind a lift control panel. The panel is usually prepared for installation according to this drawing: Picture 2.4: Dimensions of mounting holes for announcer – cabin universal ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 37 ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 38 Can I use a longer cable to the speaker? For the speaker yes, but we do not recommend it for the microphone. Electrical fitting Description of terminals, connectors and jumpers Picture 2.5: Terminals, connectors and jumpers on the board of Announcer – cabin universal ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 39 2. cabin - default, 3. under the cabin, 4. bottom of shaft). Configure the required changes according to the printed marking on the cover of the electronics. If you have removed the cover, put it back in the original position and tighten the screw ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 40 You can restore the original settings of location easily according to the depiction on the cover Connection to bus Polarity must be maintained. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 41 For activation by connection of voltage, leave the jumper as is (5 pin on jumper 12) - ALARM without fitting jumper (this configuration is the factory one) For activation by disconnection of voltage, fit jumper (5 pin on jumper 12) – ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 42 For activation by connection of voltage, leave the jumper as is (6 pin on jumper 12) - CANCEL without fitting jumper (this configuration is the factory one) For activation by disconnection of voltage, fit jumper (6 pin on jumper 12) - CANCEL inverted – fitted with jumper ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 43 The loop is connected to the connector (10) with any polarity. Following agreement it can be part of the delivery, including cable 1m long. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 44 The indication loop must be marked by the relevant pictogram (ear), and its location must correspond to valid standards. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 45: Announcer - Machine Room

    TRIPHONY with another lift by holding down the button for more than 2 seconds (a voice menu starts for selection of the lift number with which you wish to initiate triphony). ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 46 7-8 jumpers for configuration of common machine room Mounting The announcer is usually mounted on a wall using the appended wall plugs and screws. Electrical Installation Description of connectors On the right side under the cover there are 3 connectors ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 47 Be careful of duplicate configuration of a common announcer machine room. Connection to bus Open the side door. Pull out the terminal from the connector, connect the wires, and put the terminal back in the connector. Polarity must be maintained. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 48 Open the protective door on the announcer, and using the trimmer adjust the required volume. Caution Using this trimmer we set the best acoustic properties, but also ensure that there is no feedback. The configuration of volume only works for the handsfree mode ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 49: Announcer - Shaft

    The button TRIPHONY activates voice communication with the other announcers of the same lift. The ALARM button can be used, for example, when someone falls down the shaft. The announcer calls the numbers configured in the memory of the button ALARM - set 2 (021-026). ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 50 The announcer is not intended for installation outdoors. Electrical Installation Connectors The announcer has one connector for connecting the bus. The second RJ-11 connector serves for connecting up the earpiece. Both connectors are under the side doors. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 51 Open the protective door on the announcer, and using the trimmer adjust the required volume Caution Using this trimmer we set the best acoustic properties, but also ensure that there is no feedback. The configuration of volume only works for the handsfree mode ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 52: Pstn Module

    Be careful when putting the module on the pins in order to ensure that you have connected all the pins to the module connector.If you have fitted the pins into the connector correctly, it is possible to fix the module using 2 bolts and 1 screw ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 53 Connect using RJ 11 connector. Connect using fitting terminal. Warning When fitting the module, be careful to ensure that all the pins are fitted correctly into the connector. If they are badly connected, the module could be damaged. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 54: Gsm/Umts Module

    When fitting the module be careful of the antenna connector, which must be pushed through the hole in the CU cover. If you have fitted the pins into the connector correctly, it is possible to fix the module using 2 bolts and 1 screw. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 55 When fitting the module, be careful to ensure that all the pins are fitted correctly into the connector. If they are badly connected, the module could be damaged. Caution In places with poor signal quality find an appropriate place or use a special (directional) antenna. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 56: System Configuration

    3. System configuration The system is supplied pre-configured. ® ® This chapter describes the configuration of Lift8 . It is possible to program Lift8 in three ways: 3.1 Programming the L8 3.2 Table of parameters (FW 1.0.0) ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 57: Programming The L8

    If the entered password is correct, L8 announces: “You have entered the programming menu, select parameter”. The factory setting of the password is 12345, and we recommend that you enter a different password so that your equipment is protected from other people. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 58 – the number of the function must be entered again even only the value was incorrect. If you program a value other than the one you wanted, and the value is saved, you can naturally enter the correct number again. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 59 PSTN, you are probably not entering the right password. Programming via service tool You can find out details about information about programming via the service tool in chapter 5. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 60 ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 61: Table Of Parameters (Fw 1.0.0)

    (CPC/P100) 111-116 for memory If there is no guarantee of 1-6 calling problem-free transfer of ALARM (set 1) DTMF, do not set 5 for autodetection CPC/P100, but preferably give the precisely used protocol (3,4) ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 62 DTMF, do not set 5 for autodetection CPC/P100, but preferably give the precisely used protocol (3,4) max. 16 Memory 1 for empty check call numerals 0 - 9 max. 16 Memory 2 for empty check call numerals 0 - 9 ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 63 16 Memory 2 for empty fault reporting numerals 0 - 9 max. 16 Memory 2 for empty fault reporting numerals 0 - 9 max. 16 Memory 4 for empty fault reporting numerals 0 - 9 ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 64 (if there is an picked up incoming call). The call can be extended by a command for Max. period of 0 – 1000 s 120 s extension of the call (par. call 924). 0=switched off (never-ending call) ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 65 500 – 9999 ms 5500 ms dialling tone in an interval between the (ring-back) parameters 949 and 950. Min. period of Detection of incoming 50 – 2000 ms 200 ms dialling tone call: The period of the dialling ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 66 01 = User message #1 02 = User message #2 03 = User message #3 04 = User message #4 05 = User message #5 06 = User message #6 ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 67 (=2829 CU with the aid of Service a row 1612) Tools "" = voice message DTMF sequence (2N protocol) Format: *X*Y Sequence for Y*ID(par.974)*checksum# call max. 8 confirmation empty X=1 - Alarm, 2 – Checking...
  • Page 68 0 = forbidden, 1 = permitted (if the Permit for parameter is permitted it calling from 0 - 1 is possible for the machine machine room room to call via the announcer to the public network) ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 69 The parameters 1003 and 1004 serve for a configuration of the username and password for verification at the operator. Most operators do not use any verification. If the your operator requires verification, it must give you the necessary access data. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 70 This application allows you to configure an L8 connected directly to a PC via a USB or via the internet using the IP address of Lift8 (only UMTS version). It also allows you to perform an upgrade of the firmware.

  • Page 71: Functions And Use

    In this chapter there is a description of the basic and expanded functions of the product. Here is an overview of everything you will find in the chapter: 4.1 User instructions 4.2 Instructions for control centre 4.3 Description of function (for advanced users) ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 72: User Instructions

    The announcer is equipped with a handsfree device, or it is possible to connect an earpiece for better acoustic properties. For entry to the voice menu it is possible to select the functions using the keypad on the announcer. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 73 For termination of the rescue process press 2 For recording information about this communicator press 3 For return to main menu press # To end the call press #. Note Option 9 serves for the configuration of the L8- see chapter Configuration. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 74: Instructions For Control Centre

    111-116 -> Type of confirmation for memory 1-6 ALARM call - set 1 ). The L8 has a factory setting for confirmation of DTMF 1. If the control centre is equipped with the application 2N communicator, it is possible to configure the automatic sending of DTMF 1 after picking up a call.
  • Page 75 During entry to voice menu it is possible to call the lift which last called the Alarm function This is performed by pressing 0. This function operates only during calling to Lift8 via PSTN, GSM, UMTS. Note Option 9 serves for the configuration of the L8– see chapter Configuration.
  • Page 76 DTMF signalling is mixed with the call, and it may be masked by certain tones in speech. This phenomenon is not a fault of the product. It occurs very rarely. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 77: Description Of Function (For Advanced Users)

    “triphony” can be used for connection with other announcers of the same lift. If I press the triphony button (longer than 2s), I get the voice menu and can put together triphony with other shafts. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 78 A check call can be sent to the control centre via PSTN, GSM or UMTS. The configuration is performed by configuration of par 071-076 and 981 (see chapter 3.2 table of parameters) ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 79 (for example check call). Requirements with the same priority are put in queue and dealt with one after the other. Then the L8 returns to the interrupted activity if possible. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 80 Automatic receipt of check calls A control centre with a PC workplace with 2N server takes calls automatically. The server is configured using the application 2N Lift8 control panel. The check call is dealt with automatically (according to the configuration of Lift8).
  • Page 81 L8 plays the announcement “Caution, the call is ending”, the call can be extended with the symbol receipt of symbol the time limit has expired during programming requirement for a call with higher priority ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 82: Service Tool

    Here is what you can find in this section: 5.1 Installation and Login 5.2 Introduction to Application 5.3 Use For the latest FW version refer to Lift8 product pages at www.2n.cz , download section. From online manual you can use this link ®...

  • Page 83: Installation And Login

    Also select whether the application should be installed for the currently logged-in user ® or all the PC users. Now the wizard is ready to install the 2N Lift8 Service Tool Confirm user account administration notification to the Windows system if necessary.
  • Page 84 Further parameters include the Username and CU Password; see the figure. Now select the server connection and press Connect or double-click the ® selected server with the left button . The application will log you in to the 2N Lift8 Central Unit .
  • Page 85 Refer to the text below for the default values. Now connect the CU and click ® Connect. The Lift8 Service Tool automatically finds the connected CU on the PC and starts downloading parameters and logs. Having completing the download, the 2N ® Lift8 Service Tool is ready for work. Warning ®...

  • Page 86: Introduction To Application

    ® Figure: 2N Lift8 Service Tool Window The Main menu contains three pop-up menus. The Device menu helps you connect to or disconnect from the CU. The Diagnostic pack menu helps you open a diagnostic pack from a file on the disk and save it.
  • Page 87 (100%). The lower part of the application includes the Logout button (to the right) and other important controls, which may be different in different menus. The table below describes all the buttons available in the application. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 88 Back is only available in the Connect to device menu and helps you return to the onfiguration / Parameters menu when you do not want to get connected to any CU. Connect logs in the user to the configured CU. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 89 CU memory. New set helps you create a new set of user voice messages. From device helps you download user messages from the CU. To device helps you upload new user messages into the CU memory. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 90 Save to directory saves the list of user messages into a selected folder onto a disk. Print HW settings - diagram helps you print out the current 2N ® Lift8 HW settings as an image.
  • Page 91 ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 92: Use

    Upon the application start, you get to the Configuration / Parameters / Basic menu ® including almost all of the Lift8 Central Unit settings. Now you are in the offline configuration mode: modify, prepare for upload and then save the settings into a file to be uploaded to the CU.
  • Page 93 Set the filter for each column separately and combine filters to find the required data more efficiently. Click on the funnel symbol in each column to enable the filter; an active filter is signalled by the funnel colour change. See the figure below. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 94 Level and Source specify the log type and source respectively, and Message includes the log information. The State parameter above the table specifies how many logs (rows) have been read and shows the log start/end time. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 95 Automatic refresh is the last advanced setting: set the time interval in seconds and specify in the checkbox below the main table whether or not the display shall be shifted automatically to make the last (most recent) log row visible. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 96 The User messages menu helps you replace the default system messages with ® messages of your own. Record the voice messages from a file or directly in the 2N Lift8 Service Tool in the correct format using a microphone connected to your PC.
  • Page 97 Click the microphone icon to delete the current message and start recording a new one. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 98 The last parameter is Set time in device, which displays your PC real time value by default. You can modify the time and time zone values and click Confirm to upload these time settings to the CU connected. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 99 Description of units to the left. Check off the parameter to display details and select the audio unit type as shown in the figure below. This brief description includes the audio unit serial number, type and state. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 100 List of available firmware and List of available voice menus. Select the firmware version to be uploaded to the CU and the voice menu by clicking their names. Having ® selected the items, click Upgrade to make the Lift8 Service Tool upload the new FW and voice menu to the CU. ®...
  • Page 101 Figure: Device - Upgrade - General Menu ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 102: Server

    6. Server Here is what you can find in this section: 6.1 Installation 6.2 Use For the latest FW version refer to Lift8 product pages at www.2n.cz , download section. From online manual you can use this link ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 103: Installation

    Make sure that the port is accessible from the LAN (see the Note above) ® and correctly set in all the applications. Now the wizard is ready to install your 2N Lift8 Server . It displays an overview of the settings. Check them carefully as you will not be able to modify them after installation unless you re-install the application! If you detect an error, press Back to return to the error window.

  • Page 104: Use

    The database also includes a list of authorised users, which, depending on their user roles, can connect to the server, change configuration settings ® ® and/or process incoming alarm calls via the Lift8 Control Panel Lift8 Communicator ® Lift8 Server integrates a SIP station which can be assigned up to 8 independent accounts and process up to 32 parallel calls.
  • Page 105 Database import may only be executed when the server is stopped. If the server is running, the program identifies any importing attempt as an error. Enter the following command to stop the server: C:\Program Files\2N TELEKOMUNIKACE\ 2N Lift8\Server\l8_config.exe –cStopServer ®...
  • Page 106 Then enter the –cImportDatabase parameter and the file path to import the database: C:\Program Files\2N TELEKOMUNIKACE\ 2N Lift8\Server\l8_config.exe –cImportDatabase "C:\ProgramData\2N TELEKOMUNIKACE\ 2N Lift8\Server\db–20130221095921–export.xml" Now all the database tables start being exported sequentially. Every successful table import is confirmed. Caution The path to the exported database file must always be given in inverted commas.
  • Page 107 –sMaxLift sets the maximum count of lifts to be connected to the server at the same time. The maximum count is based on the licence. –sResetAdmin resets the Admin password to default '2n'. Server Commands –cStartServer starts the l8 server.

  • Page 108: Control Panel

    Here is what you can find in this section: 7.1 Installation and Login 7.2 Introduction to Application 7.3 Use For the latest FW version refer to Lift8 product pages at www.2n.cz , download section. From online manual you can use this link ®...

  • Page 109: Installation And Login

    Select whether the application should be installed for the currently logged-in user or all ® the PC users. The wizard is ready to install the 2N Lift8 Control Panel. Confirm user account administration notification to the Windows system if necessary. Another Start item and the application shortcut icon will be added automatically.
  • Page 110 If you have installed the application for the first time, the default connection will be created automatically. This connection ® cannot be removed. If you use one and the same PC for your 2N Lift8 Control Panel and server, you can make use of these pre-settings and click the Connect icon.
  • Page 111 Caution Important! A default user with administrator login is created during the ® Lift8 Server installation to get connected to the server and configure the other users. The default user uses the following login data: Name: Admin...

  • Page 112: Introduction To Application

    ® Figure: 2N Lift8 Control Panel Window The Main menu contains three pop-up menus. The Server menu helps you disconnect from the server or terminate the application. You will always be warned before logout or termination against data loss.
  • Page 113 'Current user' displays the currently logged in user. Find the Logout button in the right-hand bottom corner and various important control buttons in the lower part of the application. The table below describes all the buttons available in the application. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 114 (marked with a distinct red frame). Undo helps undo all changes made since the last saving. Create lift group helps you add a group to the lift group (Central Unit) in configuration. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 115 Configuration/Users menu Add plan helps you add a building plan to the selected storage. Remove plan helps you remove the selected plan. Change plan updates the plan stored by storing a new map under the same name. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 116 Download plan helps you save the selected plan to a local disk. Pin view helps you separate the current screen from the application and open it in a new window. Reset filters helps you reset all filter settings. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 117: Use

    If you save the settings, all the parameters will be displayed. If you, however, add a lift with different parameters to the group, the parameters that are identical for all the lifts will only get displayed. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 118 Figure: Lift Groups - Basic Menu ® Set the lift type in the form to define which of the 2N lift systems you are using: 2N ® ® LiftNet 2N SingleTalk Lift8. ® The 2N Lift8 Server is able to work with third party equipment too. In that case, the CPC and P100 universal communication protocols are used instead of the proprietary protocol.
  • Page 119 Ctrl key to select the objects, or hold the Shift key and select the first and last objects and the objects in between will be selected too. Now drag the selected objects as mentioned above. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 120 . Refer to the Adding Lifts paragraph above for details. The next row includes Name and Password. The default password is 2n for the time being. The Serial number is set to the telephone number when the lift is created by a call.
  • Page 121 Select a user from the list of available users and click Add user to add a the user to the list. Click Delete at a user to remove the user from the user list. Click Save for confirmation. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 122 CPC/P100 transmission was successful, shaft number and alarm-initiating audio unit position, lift name and name of the agent/dispatcher who processed the alarm call. The last table row shows the note entered by the dispatcher during the alarm call. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 123 The lift address will also be displayed below the map. In case the address is incorrect, change it here and the change will occur in the Basic menu too. Use the Verify address button to set a new location and click Save to save the new address into the database. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 124 A phone number is specified for each lift too. Change the lift plan in the Available plans column and click Save to confirm the new settings. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 125 OK (green) and those that are defective due to failed check calls (red). You can zoom in/out the map as you wish. Refer to the figure below for the map view. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 126 The users can monitor the lift check call results and set some parameters. Select the lift name from the list and push Add lift to add a lift. Click on Delete to remove a lift from the list. Click Save to confirm the new settings. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 127 See below for the form details. Basic The Users / Basic menu helps you set personal information on users: the login name ® and password for login to the Lift8 applications. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 128 Select the lift name from the list and push Add lift to add a lift. Click on Delete to remove a lift from the list. Click Save to confirm the new settings. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 129 Domain parameter behind a colon as shown in the figure below. Furthermore, set the Username and Password for the SIP account at the provider's or in the PBX. Click Save for confirmation. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 130 Figure: Users - SIP Settings Menu Caution ® Make sure that the SIP line is set correctly to make the 2N Lift8 Communicator work properly. If the line is not correctly set or registered, the user will be unable to log in.
  • Page 131 Activates display of OK/defective lifts. display Emergency Helps view the lift emergency call database. Check Helps view the lift check call database. Helps view the dispatcher outgoing call Outgoing database. Call Server Provides access to the Call Server settings. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 132 Caution ® Set the SIP lines on the Lift8 Server! Therefore, you have to know the settings for the PC on which the server is installed. You need your PC settings only if the server is running locally.
  • Page 133 The Plans menu helps you administer plans of the buildings in which the lifts are installed. Use the Lifts menu to assign these plans to the selected lifts and position the ® lifts in the building plan. This information is then displayed to the 2N Lift8 Communicator operators.
  • Page 134 Find the preview of the image to be imported to the right. Click Save to confirm addition. ® All the saved plans are stored in the Lift8 Server and thus accessible to all the authorised users. Note Add the images in the PNG, JPG or BMP format.
  • Page 135 Storage Menu ® The Storage menu helps you set all storages necessary for the operation of the 2N Lift8 system and its services. You can map the storage folders on the local disk, network disks and such memory storages as USB disks and memory cards, which extend the storing space almost unlimitedly.
  • Page 136 When you logged in again without doing so, the filtration results would get displayed to you instead of all the lifts. Figure: Filter Settings ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 137 Paste Screen Function Alarm ® The Alarm calls menu provides a table of all the lift alarm calls received by the 2N Lift8 Server from the moment of lift adding up to now. Use the filter button in each column to search the call history. Refer to the Calls paragraph above for filtration details.
  • Page 138 Refer to the Calls paragraph for filtration details. The table provides information on the check call date and time, called phone number and calling user name as well as the user note if necessary. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 139 Figure: Calls - Outgoing Menu ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 140: Communicator

    Here is what you can find in this section: 8.1 Installation and Login 8.2 Introduction to Application 8.3 Use For the latest FW version refer to Lift8 product pages at www.2n.cz , download section. From online manual you can use this link ®...

  • Page 141: Installation And Login

    If you are the first user of the ® application, enter your login data as communicated to you by your 2N Lift8 administrator. It is easy to set the connection: enter the server IP address if you establish connection to a LAN or public network server.
  • Page 142 Login Screen ® Now click Connect to selected server to log in to the Lift8 Server Server login may take some time if you have an extensive database as the application has to download all the current tables. Be patient please and wait for completion.

  • Page 143: Introduction To Application

    The horizontal Main menu helps you select whether to view the assigned lifts or supervise the history of alarm ® calls. You can also display the database of the 2N Lift8 users including their phone numbers.
  • Page 144 'Current user' displays the currently logged-in user. Find the calling control buttons in the right-hand bottom corner, which may be different in different menus. The table below describes all the buttons available in the application. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 145 Keypad is used for call control via DTMF. When pressed, each button sends the assigned DTMF character into the call. This function helps you confirm calls or program the CU. Reset filters helps you reset all filter settings. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 146 ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 147: Use

    The main function of the application is to make calls. When the SIP line cannot be registered, the user cannot log in. If the SIP line cannot be ® registered, check the SIP line settings in the 2N Lift8 Control Panel and your LAN or PC firewall settings.
  • Page 148 Call button. You will then be redirected to the Outgoing call window and the call will be accomplished. See below for more details. If the call cannot be accomplished, you will be notified by a message. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 149 The table provides information on the alarm call date and time, CU phone number, serial number if the CPC/P100 transmission was successful, and name of the agent/dispatcher who processed the alarm call. The last table row shows the note entered by the dispatcher during the alarm call. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 150 When you logged in again without doing so, the filtration results would get displayed to you instead of complete information. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 151 Every call coming from the lift to the dispatcher/technician number is signalled by automatic switch to the Incoming call window and a pop-up window in the left-hand ® bottom corner of your PC main monitor. This is useful if the 2N Lift8 Communicator is inactive and its windows are covered by another application.
  • Page 152 You will lose the note editing option when you press Back to return to the application relax state and the note will be saved into the Emergency Calls table. The note length is limited to 50 characters. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 153 Every record includes the check call date/time and result. Note The Outgoing call window is completely identical with the Incoming call window and provides identical functions. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 154: Maintenance

    Reconnect the rechargeable batteries with the cables and then with the base plate. Put the upper cover back on the and tighten the screws which hold the cover. Before putting the cover on, check to see that the earthing wire is connected to the cover! ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 155 Maintenance. Always remember that the state of the batteries is wholly fundamental for the operation of the system. In the chapter Maintenance there is also a description of care for the rechargeable batteries – including instructions for replacement of batteries. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 156: Technical Parameters

    All the product parameters comply with TBR-21 on condition that the product is to be operated as a single line terminal, i.e. no parallel connection with any other equipment is allowed. Line interference and noise picked up by the L8 microphone are relevant factors. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 157 The manufacturer reserves the right to modify the product in order to improve its qualities. The product contains no environmentally harmful components. When the product's service life is exhausted, dispose of it in accordance with applicable legal regulations. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 158: Supplementary Information

    11. Supplementary Information ® This section provides supplementary information on the Lift8 product. Here is what you can find in this section: 11.1 Troubleshooting 11.2 List of Abbreviations 11.3 Regulations 11.4 General Instructions and Cautions ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 159: Troubleshooting

    11.1 Troubleshooting For the most frequently asked questions refer to faq.2n.cz ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 160: List Of Abbreviations

    2N® check call Server or other defined number internal communication between announcers, usually between all...

  • Page 161: Regulations

    Regulation (EC) No. 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment. ® TELEKOMUNIKACE a.s., www.2n.cz...

  • Page 162: General Instructions And Cautions

    The manufacturer also assumes no responsibility for additional costs incurred by the consumer as a result of making calls using a line with an increased tariff. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 163 Make sure that the devices to be disposed of are complete. Do not throw battery packs into fire. Battery packs may not be taken into parts or short-circuited either. ® TELEKOMUNIKACE a.s., www.2n.cz...
  • Page 164 2N TELEKOMUNIKACE a.s. Modřanská 621, 143 01 Prague 4, Czech Republic Tel.: +420 261 301 500, Fax: +420 261 301 599 E-mail: sales@2n.cz Web: www.2n.cz LŠ2016 ® TELEKOMUNIKACE a.s., www.2n.cz...

This manual is also suitable for:

L8

Table of Contents