Table of Contents
Advertisement
3.
To move forward in a straight line, move both
levers forward with equal pressure.
To turn left or right, pull the motion-control lever
back toward neutral in the desired turn direction.
The tines can be in the down position when
making gradual turns.
To make zero-degree turns, lift your foot off the
tine engagement foot switch control to raise the
tines. The head will raise in 1 second.
Important:
Do not make a zero-degree turn
when the tines are down as turf tearing will
result.
Important:
Do not drive in reverse when the
tines are down as turf tearing will occur.
The machine moves faster the farther the
motion-control levers are moved from the neutral
position.
4.
To stop, position both motion-control levers in
the neutral operating position.
Driving in Reverse
1.
Move the motion-control levers to the neutral
operating position.
2.
To move rearward in a straight line, slowly move
both levers rearward with equal pressure.
Figure 26
To turn left or right, release pressure on the
motion-control lever toward the desired turn
direction.
To make zero turns, lift your foot off of the tine
g016672
ground engagement foot switch to raise the
tines. The head will raise in half second.
Important:
the tines are in the down position.
3.
To stop, position both motion-control levers in
the neutral operating position.
Positioning the Air-Cleaner
Cover for Cold or Warm Air
Temperature
Important:
Running the engine with the
air-cleaner cover positioned for cold-weather
operation in normal conditions can damage the
engine.
The air-cleaner cover has 2 positions: the cold or
normal, ambient air positions:
Adjust the air-cleaner cover as follows:
•
When operating in a cold ambient air condition
(cold air temperature and humidity)—position the
air-cleaner cover with snowflake decal facing out
(Figure
28).
Note:
Use this position if your machine exhibits
carburetor icing. Symptoms include the engine
runs rough at idle or low speed, and it discharges
black or white smoke in the exhaust.
•
When operating in a normal ambient air
condition—position the air-cleaner cover with sun
decal facing out
Note:
Use this position if your machine is not
exhibiting carburetor icing.
25
Figure 27
Do not make a zero turn when
(Figure
28).
g016673
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
