Page 1 Portégé User’s Guide If you need assistance: Toshiba’s Support Web site pcsupport.toshiba.com Toshiba Customer Support Center Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 174 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's ports.
Page 4: Industry Canada Requirement
This device must accept any interference received, including interference that may cause undesired operation. Contact either: Toshiba’s Support Web site at pcsupport.toshiba.com. Or call the Toshiba Customer Support Center: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Customer Support Center within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
Page 6 Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Instructions for IC CS-03 Certified Equipment NOTICE: The Industry Canada label identifies certified equipment.
Page 7: Wireless Interoperability
Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined and approved by the Institute of Electrical and Electronics Engineers.
Page 8: Regulatory Information
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 9 The above caution applies to products that operate with an 802.11a radio device. EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: This product is carrying the CE-Mark in accordance with the related European Directives. The party responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany.
Page 10 This Directive applies to EU member countries only and does not apply to end users in other countries such as the United States. Although the initial emphasis is in Europe, Toshiba is already working with design engineers, suppliers, and other partners to determine appropriate worldwide product life cycle planning and end-of-life strategies for our products.
Page 11 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 12: Device Authorization
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048...
Page 13: Radio Approvals For Wireless Devices
Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer. Not all devices are available on all models. Approved Countries/Regions for the Intel Link 5000 Series This equipment is approved to the radio standard by the countries/regions in the following table.
Page 14 Romania San Marino Singapore South Africa Sweden Taiwan (United Arab Emirates) Virgin Islands Approved Countries/Regions for use for the Atheros AR5BXB72 2.4 + 5GHz 11n minicard This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 15 Slovenia Sweden UAE (United Arab Emirates) Uruguay Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 16 Licentie verplicht voor gebruik met buitenantennes. Neem contact op met verkoper voor juiste procedure. Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Liechtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 17 for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation. Approved Countries/Regions for use for the Atheros AR5BXB63 11g minicard This equipment is approved to the radio standard by the countries/regions in the following table.
Page 18 Approved Countries/Regions for the Realtek This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Austria Bangladesh Bosnia and Herzegovina Canada Colombia Cyprus Ecuador...
Page 19 Approved Countries/Regions for use for the ® Intel PRO/Wireless 3945ABG Network Connection This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. NOTE An adhoc mode is available in Ch1-Ch11(802.11b/g), An Infrastructure mode is available in Ch1-Ch11 (802.11b/g)
Page 20: Bluetooth Wireless Technology Interoperability
11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b, 802.11g and 802.11n respectively. The IEEE 802.11n specification has not been finalized and is currently in draft release. The TOSHIBA 11a/b/g/n Wireless LAN Adapters are based on the Draft Release, Version 1.0, of the IEEE 802.11n specification.
Page 21 Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for...
Page 22: Bluetooth Wireless Technology And Your Health
Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Page 23: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 24 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.
Page 25 Never attempt to disassemble, adjust or repair an optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 26 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 27 Secure Digital and SD are trademarks of SD Card Association. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 28: Table Of Contents
Keeping yourself comfortable ...42 Precautions...42 Important information on your computer’s Setting up your computer ...44 Setting up your software...45 Registering your computer with Toshiba ...46 Adding optional external devices...46 Connecting to a power source ...47 Charging the main battery...49 cooling fan ...44...
Page 29 Using the computer for the first time ...50 Opening the display panel ...50 Your computer’s features and specifications ...51 Turning on the power ...51 Adding memory (optional) ...52 Installing a memory module ...53 Removing a memory module...57 Checking total memory ...59 Hard Drive Recovery Utilities ...60 Creating Recovery DVDs...61 Hard Disk Drive Recovery options ...62...
Page 30 Playing an audio CD...103 Playing optical media ...103 Recording optical media ...103 Removing a disc with the computer on...104 Removing a disc with the computer off ...104 Caring for optical discs ...105 Toshiba’s online resources ...105 keyboard ...91 ® keys ...92 field...96 ®...
Page 31 Chapter 3: Mobile Computing...106 Toshiba’s energy-saver design...106 Outdoor display switch ...107 Running the computer on battery power ...107 Battery Notice ...107 Power management ...109 Using additional batteries ...109 Charging batteries...109 Charging the main battery...110 Charging the RTC battery...110 Monitoring main battery power...111 Determining remaining battery power...112...
Page 32 Setting passwords ...145 Using an instant password...145 Using a supervisor password...146 Using a user password ...147 Deleting a user password...148 TOSHIBA Security Assist ...149 TOSHIBA PC Diagnostic Tool Utility...151 TOSHIBA HDD Protection Utility ...152 the Internet ...131 ® ...133 SD card ...136 ®...
Page 33 TOSHIBA SD™ Memory Card Format Utility ...153 TOSHIBA SD™ Memory Boot Utility...154 Booting from a bootable SD card...155 Mouse Utility ...156 TOSHIBA Hardware Setup...157 USB Sleep and Charge Utility ...159 Starting the USB Sleep and Charge Utility...159 USB Sleep and Charge ...159 Enabling USB Sleep and Charge ...161...
Page 34 DVD operating problems...195 Develop good computing habits ...196 Data and system configuration backup in the If you need further assistance...202 Before you contact Toshiba ...202 Contacting Toshiba ...202 Other Toshiba Internet Web sites...203 Toshiba’s worldwide offices...203 Appendix A: Hot Keys/TOSHIBA Cards...205 Hot Key Cards ...205...
Page 35 Zoom (Display resolution) ...220 Keyboard hot key functions ...221 Appendix B: Power Cord/Cable Connectors... 222 Appendix C: TOSHIBA PC Health Monitor... 223 Enabling the TOSHIBA PC Health Monitor ...224 If a TOSHIBA PC Health Monitor message Cleaning the cooling module...226 Glossary...
Page 36: Introduction
You can wake the computer from Sleep mode by pressing the power button. See the “Mobile Computing” section of the Toshiba User’s Guide for more information on using power management settings to...
Page 37 (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its computer component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
Page 38: This Guide
Toshiba’s Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice.
Page 39: Safety Icons
Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 40: Other Documentation
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see Goes Wrong” on page 174.
Page 41: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer. The “Instruction Manual for Safety and Comfort,” that is shipped with your computer, contains important safety information.
Page 42: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, included with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 43 Avoid prolonged physical contact with the underside or surface of the computer. Computer base and palm rest can become hot! Avoid prolonged contact to prevent heat injury to skin. Read the “Avoid extended contact between computer base/palm rest and skin” section in the “Instruction Manual for Safety and Comfort”...
Page 44: Important Information On Your Computer's Cooling Fan
Getting Started Setting up your computer Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode).
Page 45: Setting Up Your Software
To use external power or to charge the battery you must attach the AC adaptor. See NOTE Please handle your computer carefully to avoid scratching or damaging the surface. Setting up your software When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.
Page 46: Registering Your Computer With Toshiba
Product registration can be completed by either visiting the Toshiba Web site at http://www.register.toshiba.com, or by double-clicking the Toshiba Resources icon on your desktop and then double-clicking Toshiba Registration. Failure to complete Product Registration will not diminish Customer rights under the Toshiba standard limited Warranty.
Page 47: Connecting To A Power Source
TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.
Page 48 Getting Started Connecting to a power source To connect AC power to the computer: Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 49: Charging The Main Battery
The computer’s main battery light gives you an indication of the main battery’s current charge: Glows amber while the main battery is being charged (AC adaptor connected) Glows white when the main battery is fully charged Is unlit when the main battery has discharged, the battery is not charging, or the AC adaptor is not plugged into the computer or AC outlet Flashes amber when the main battery charge is low and it...
Page 50: Using The Computer For The First Time
Getting Started Using the computer for the first time NOTE Battery life and charge time may vary depending on the applications, power management settings, and features used. Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Facing the front of the computer, locate the center of the display panel.
Page 51: Your Computer's Features And Specifications
Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high- precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology.
Page 52: Adding Memory (Optional)
You may want to increase the computer’s memory if you use complex software or process large amounts of data. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page...
Page 53: Installing A Memory Module
Installing a memory module A memory module can be installed in the memory module slot on the base of the computer. You will need a small Phillips screwdriver for this procedure. If the computer has been running recently, the memory module may be hot.
Page 54 Getting Started Adding memory (optional) Click Shut Down. The operating system turns off the computer. Unplug and remove any cables connected to the computer, including the AC adaptor. Remove the main battery. For information on removing the main battery, see on page 117.
Page 55 Remove the memory module slot cover. Place the screws and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 56 Getting Started Adding memory (optional) Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer). (Sample Illustration) Inserting the memory module into the socket Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket.
Page 57: Removing A Memory Module
(Sample Illustration) Inserting the memory module into the slot Replace the memory module slot cover and secure it using the screws. Re-insert the main battery. For more information on inserting the main battery, see Turn the computer right side up. Reconnect the cables.
Page 58 Getting Started Adding memory (optional) Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Sleep or Hibernation mode.
Page 59: Checking Total Memory
Gently lift the memory module to a 30-degree angle and slide it out of the slot. (Sample Illustration) Removing the memory module Replace the memory module slot cover and secure it using the screws. Re-insert the main battery. For more information on inserting the main battery, see Turn the computer right side up.
Page 60: Hard Drive Recovery Utilities
Continue; otherwise, click Cancel. If unsure, cancel and try again. Hard Drive Recovery Utilities NOTE If your computer did not come with an optical drive, visit the Toshiba Web site at optical drive. Your computer has been configured with a hard disk partition to allow you to recover your hard disk drive or reinstall selected applications and software features or utilities.
Page 61: Creating Recovery Dvds
Creating Recovery DVDs NOTE If your computer did not come with an optical drive, visit the Toshiba Web site at optical drive. Depending on your system configuration, you may be able to copy the hard drive recovery to DVD which gives you the ability to...
Page 62: Hard Disk Drive Recovery Options
Getting Started Hard Drive Recovery Utilities Hard Disk Drive Recovery options NOTE If your computer did not come with an optical drive, visit the Toshiba Web site at optical drive. The following are the available hard disk drive recovery options:...
Page 63 If not skip to step 4. (Sample Image) Product Recovery Menu screen When the Toshiba Recovery Wizard screen displays, select one of the options and then click Next. The options are: Recovery of Factory Default Software...
Page 64 Be sure to save your work to external media first. On the Toshiba Recovery Wizard screen, select Recovery of Factory Default Software, and then click Next. The Recovery of Factory Default Software screen appears.
Page 65 The Recovery Wizard allows you to delete all data and partitions from the hard disk. To delete the data and partitions from your hard disk: On the Toshiba Recovery Wizard screen, select Erase the hard disk, and then click Next. The next screen lists the two methods you can choose: Delete all data and partitions from the hard disk—This...
Page 66 To recover only your C: drive: On the Toshiba Recovery Wizard Screen, select Recovery of Factory Default Software, and then click Next. Select Recover without changing the hard drive partitions.
Page 67: Hard Disk Drive Recovery Using The Recovery Media
Press any key on your keyboard to restart the computer. Hard Disk Drive Recovery using the Recovery media NOTE If your computer did not come with an optical drive, visit the Toshiba Web site at optical drive. If you need to recover your computer to its default factory state, you can rebuild the system using your Hard Drive Recovery Utilities.
Page 68 Getting Started Hard Drive Recovery Utilities System Recovery Options (Sample Image) Selecting a Process screen If your system offers a choice of Windows Vista bit operating system, select one at this time. If not skip to step 6. (Sample Image) Product Recovery Menu screen ®...
Page 69 Click Yes to continue. (Sample Image) Warning screen The Toshiba Recovery Wizard screen will appear. Please refer “Hard Disk Drive Recovery options” on page 62 the available recovery options. (Sample Image) Toshiba Recovery Wizard screen...
Page 70: Checking The Hdd Operating Status
Highlight the hard disk drive in the Volume list to display its status in the lower portion of the screen. Installing drivers and applications The Toshiba Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: Click Start, All Programs, Toshiba, Recovery, and then TOSHIBA Application Installer.
Page 71: Scrolling With The Touchpad
NOTE Because the TouchPad is much smaller than the display screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction. Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control buttons.
Page 72: Using External Display Devices
Getting Started Using external display devices Using external display devices Your computer comes with a built-in display, but you can also connect an external display device to an available video port. Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen.
Page 73: Adjusting The Quality Of The External Display
This hot key cycles through the settings in the following order (the last two options are available if an external monitor is connected): LCD—Internal display only LCD + CRT—Internal display and external monitor simultaneously CRT—External monitor only LCD + CRT Multi Monitor—Internal display and external monitor, with one acting as the primary display and the other as an extended desktop Swap—Switch primary display between internal display...
Page 74: Connecting A Printer
Getting Started Connecting a printer Connecting a printer NOTE Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 75: Connecting An Optional External Diskette Drive
Connecting an optional external diskette drive Click Start, Control Panel, Hardware and Sound, and then under Printers, click Add a printer. The Add Printer Wizard appears. (Sample Image) Add Printer Wizard Follow the on-screen instructions to set up your printer. Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5-inch diskettes.
Page 76: Turning Off The Computer
Getting Started Turning off the computer To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports. (Sample Illustration) Connecting an drive Turning off the computer Pressing the power button before shutting down the Windows operating system could cause you to lose your work.
Page 77 TECHNICAL NOTE: Before using the Shut Down option to turn off your computer, save your files and make sure all disk/disc activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again. Use the Sleep command to save your work, system settings, and current state of the desktop to memory, so that when you turn on the computer again, you will quickly and automatically...
Page 78: Using The Shut Down Command
Getting Started Turning off the computer NOTE After your computer sleeps for an extended period of time, the Windows programs to your internal storage drive, and then shuts down the computer. Factors to consider when choosing Sleep: While in Sleep mode, the computer uses some main battery power.
Page 79 Use the following steps to turn off your computer using the Shut Down command: Click Start, and then click the arrow next to the Lock button in the lower-right part of the Start menu. The Shut Down menu appears. Start (Sample Image) Shut Down menu Click Shut Down.
Page 80 Getting Started Turning off the computer Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. (Sample Image) Advanced settings tab of Power Options screen Click Power buttons and lid to display the actions that you can configure.
Page 81: Using And Configuring Hibernation Mode
Once the computer is configured, you can turn it off by either pressing the power button or closing the display panel, depending on the options set. Restarting your computer To start the computer up again, press the power button until the on/off light glows white.
Page 82 Getting Started Turning off the computer To use any of these methods, you first need to enable them using the Power Options feature. Click Start, Control Panel, System and Maintenance, and then Power Options. The Power Options window appears. Click Change plan settings under the power plan to be customized.
Page 83: Using And Configuring Sleep Mode
Power button action Set this option to Hibernate if you want the computer to go into Hibernation mode when you press the power button. Start menu power button Set this option to Hibernate if you want the computer to go into Hibernation mode when you click the power button in the Start menu.
Page 84 Getting Started Turning off the computer Click Sleep. The computer saves the status of all open programs and files to the memory, turns off the display, and enters into a low-power mode. The on/off light blinks amber indicating the computer is in Sleep mode.
Page 85 Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. (Sample Image) Advanced settings tab of Power Options screen Click Power buttons and lid to display the actions that you can configure. Select Sleep for the options you want. NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC...
Page 86: Closing The Display Panel
Getting Started Customizing your computer’s settings Click Apply. Click OK. Once the computer is configured, you can place it into Sleep mode by either pressing the power button or closing the display panel, depending on the Sleep options set. Starting again from Sleep mode To start up the computer from Sleep mode, press the power button until the on/off light glows white.
Page 87: Cleaning The Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object.
Page 88 Getting Started Caring for your computer Pass the locking end through the loop. Insert the cable’s locking end into the security lock slot on your computer, then engage the locking device. The computer is now securely locked. (Sample Illustration) Attaching security lock cable...
Page 89: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 90 Learning the Basics Computing tips Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 91: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows functionality of a full-size keyboard. (Sample Illustration) Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The space bar creates a space character instead of just passing over an area of the page.
Page 92: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard Ctrl, Fn, and Alt keys (Sample Illustration) Ctrl, Fn, and Alt keys Ctrl , and program you are using. For more information, see your program documentation. Function keys The function keys (not to be confused with the keys at the top of the keyboard.
Page 93: Overlay Keys
Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10-key keypad on a desktop computer’s keyboard. (Sample Illustration) Numeric and cursor control overlay Using the overlay to type numeric data The keys with the numbers on their right front are the numeric...
Page 94: Starting A Program
Learning the Basics Starting a program Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use the Start menu or Windows If you prefer to open the program first, you have four options.
Page 95: Starting A Program From Windows
Starting a program from Windows If a program is not listed in the All Programs menu, you can start it from Windows your computer’s contents as a hierarchy or “tree.” You can easily see the contents of each drive and folder on your computer. To use this method, you should know the file name and location of the program’s executable file (this file ends with .exe).
Page 96: Starting A Program Using The Start Search Field
Learning the Basics Saving your work Starting a program using the Start Search field This example uses the Start menu’s Start Search field to start WordPad: Click Start to display the Start menu. The Start Search field appears at the bottom of the Start menu. Start Search field...
Page 97 Saving files ® In your Windows Click Browse folders. If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As dialog box. Use this dialog box to specify where to store the document and to give it a file name.
Page 98: Printing Your Work
Learning the Basics Printing your work Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft file name with an extension of “.doc” is assumed to be a Microsoft Word file.
Page 99: Backing Up Your Work
Specify the print parameters. For example, the range of pages and number of copies to print. Click Print. Backing up your work Back up all the files you create in case something happens to your computer. You can back up your files to different types of media such as CDs, DVDs, diskettes, or to a network, if available.
Page 100: Using The Optical Drive
Learning the Basics Using the optical drive Using the optical drive (Available on certain models) Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that were not available on previous video platforms.
Page 101: Inserting An Optical Disc
Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive. When the disc tray is open, be careful not to touch the lens or the area around it.
Page 102 If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 103: Playing An Audio Cd
Read/write data and multi-media files to recordable optical media. For more information regarding supported optical media formats please refer to your computer’s detailed specifications at pcsupport.toshiba.com. Learning the Basics Using the optical drive ® Player and use it to select and...
Page 104: Removing A Disc With The Computer On
Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical media players/recorders, in certain cases, your Toshiba optical drive may not record on certain optical media that bear the applicable logo, or play back optical media recorded by other computers or optical media recorders.
Page 105: Caring For Optical Discs
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 106: Chapter 3: Mobile Computing
It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been preset by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you...
Page 107: Outdoor Display Switch
EasyGuard Optimize—to enable users to customize system settings to be more productive. *Toshiba EasyGuard some of which may or may not be available on a particular Toshiba computer depending on the model selected. See easyguard.toshiba.com Outdoor display switch Your model comes with a transreflective screen.
Page 108 This is normal for all batteries. To purchase a new battery pack, see the accessories information included with your computer or visit the Toshiba Web site at accessories.toshiba.com. Use only batteries designed to work with your Toshiba computer.
Page 109: Power Management
Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Page 110: Charging The Main Battery
Mobile Computing Charging batteries Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off. TECHNICAL NOTE: The recharging of the battery cannot occur when your computer is using all of the power provided by the AC adaptor to run applications, features, and devices.
Page 111: Monitoring Main Battery Power
To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours. NOTE It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working.
Page 112: Determining Remaining Battery Power
Mobile Computing Monitoring main battery power HINT: Be careful not to confuse the battery light ( light ( When the on/off light flashes amber, it indicates that the system is suspended (using the Windows Power button AC power light (Sample Illustration) Power and battery light locations Determining remaining battery power Wait at least 16 seconds after turning on the computer before trying NOTE...
Page 113: What To Do When The Main Battery Runs Low
With repeated discharges and recharges, the battery’s capacity gradually decreases. A frequently used older battery does not power the computer for as long as a new battery, even when both are fully charged. TECHNICAL NOTE: The computer drains the battery faster at low temperatures.
Page 114: Conserving Battery Power
Mobile Computing Monitoring main battery power To change the default notification settings: Click Start, Control Panel, Mobile PC, and then Power Options. The Power Options window appears. Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears. Click Change advanced power settings.
Page 115: Power Plans
There are various ways in which you can conserve power and extend the operating time of your battery: Enable Sleep or Hibernation, which saves power when you turn off the computer and turn it back on again Use the Windows These power-saving options control the way in which the computer is configured.
Page 116: Using A Hot Key To Set The Power Plan
Mobile Computing Monitoring main battery power To edit a plan or to edit advanced settings, continue to the following NOTE steps. Click Change Plan Settings to choose the plan you want to edit. This screen allows you to change basic settings. Click Change Advanced Settings to access settings for battery notification levels, hard drive power save time, etc.
Page 117: Changing The Main Battery
While continuing to press desired Power Plan. The Power Plan options are: Balanced, Power Saver, and High Performance. Release the The hot key card disappears. You are now in the selected mode. Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery.
Page 118 Mobile Computing Changing the main battery Slide the battery release lock to the unlocked position. (Sample Illustration) Unlocking the battery release lock Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. (Sample Illustration) Removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately.
Page 119: Inserting A Charged Battery
Inserting a charged battery To insert a battery: Wipe the terminals of the charged battery with a clean cloth to ensure a good connection. Insert the charged battery into the slot until the latch clicks. The battery pack has been designed so that you cannot install it with reverse polarity.
Page 120: Taking Care Of Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. A reverse polarity condition should be avoided with all batteries.
Page 121: Maintaining Your Battery
Maintaining your battery Fully discharging your battery pack will allow better accuracy of the battery meter. To fully discharge your battery pack: Periodically, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.
Page 122: Disposing Of Used Batteries
If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. In addition, Toshiba’s recycling initiatives include recycling programs, events and consumer promotions. For details, visit www.ToshibaDirect.com, select Recycling &...
Page 123: Traveling Tips
Never leave your computer on a sunny ledge or in a place where it could get wet or covered in dust. Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs.
Page 124: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your computer. Exploring the desktop The desktop is the launching pad for everything you can do in the ® Windows operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 125: Finding Your Way Around The Desktop
Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, Taskbar, Notification Area, and background pattern. Icons Start button (Sample Image) Windows Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 126 Exploring Your Computer’s Features Exploring the desktop Your desktop may contain other icons depending on your configuration. See Windows information on each icon and how to use it. Start button You use the Start button to: Start programs Open documents Adjust system settings Find files Access Windows...
Page 127: Setting Up For Communications
Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: A browser or communications program An Internet Service Provider (ISP) or online service if you plan to use the Internet A way to connect to the ISP (for example modem/ ®...
Page 128: Connecting Your Computer To A Network
Exploring Your Computer’s Features An overview of using the Internet Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports. Accessing a network To access a network: At the office, connect an Ethernet cable to the Network port (RJ45) jack on your computer.
Page 129: The World Wide Web
The World Wide Web The World Wide Web (or “Web”) is a subset of the Internet—a collection of interlinked documents (located on computers connected to the Internet) that work together using a specific Internet protocol called Hypertext Transfer Protocol (HTTP). The World Wide Web offers information as text, images, audio, or video to be referenced from anywhere in the world.
Page 130: Surfing The Internet
Exploring Your Computer’s Features An overview of using the Internet Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type in the Web address.
Page 131: Uploading To, And Downloading Files From, The Internet
Uploading to, and downloading files from, the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer).
Page 132: Using External Speakers Or Headphones
Exploring Your Computer’s Features Web Camera Using external speakers or headphones Your computer is equipped with a sound system with an internal speaker. Instead of using the internal speaker, you can connect headphones or a pair of external stereo speakers. Before putting on headphones to listen, turn the volume down.
Page 133: Using An Expresscard
Using an ExpressCard The ExpressCard slot also supports hot swapping, which allows you to replace one ExpressCard with another while the computer is on. Inserting an ExpressCard Before you insert an ExpressCard comes with the card to see if you need to do anything before you insert it.
Page 134: Using An Sd™ Card
During installation of the SD card drivers, one or more dialog boxes may appear indicating that the driver is not digitally signed. The message may appear as “Digital Signature not found (About Secure Digital Emulation from Toshiba).” Click Yes to continue. ® message “copying...” disappears, writing to the...
Page 135: Inserting An Sd Card
Formatting an SD card To format an SD card, use the Toshiba SD Memory Card Format utility. Click on Start, All Programs, Toshiba, Utilities, and then click on SD Memory Card Format.
Page 136: Using Sleep Or Hibernate While Using The Sd Card
Exploring Your Computer’s Features Using an SD™ card Stopping or removing the SD card after formatting If you have formatted the SD card drive with the Windows operating system format (see page 135), you may be unable to stop or eject your card. If this occurs, try restarting the computer.
Page 137: Using The Esata/Usb Combo Port
Replicator, your computer must be properly aligned with the Port Replicator. For more information, consult the user’s manual that came with your Port Replicator, or visit pcsupport.toshiba.com. To find Port Replicators and other expansion devices compatible with your computer model, please visit accessories.toshiba.com.
Page 138: Chapter 5: Utilities
TOSHIBA Assist TOSHIBA Application Installer Supervisor password User password TOSHIBA Security Assist TOSHIBA PC Diagnostic Tool Utility TOSHIBA HDD Protection Utility TOSHIBA SD™ Memory Card Format Utility TOSHIBA SD™ Memory Boot Utility Mouse Utility...
Page 139: Toshiba Assist
Fingerprint Authentication Utility ConfigFree® TOSHIBA Face Recognition TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist.
Page 140: Connect
Utilities TOSHIBA Assist The TOSHIBA Assist offers four categories of options: Connect Secure Protect & Fix Optimize Connect The features available in this category are: ConfigFree Bluetooth Bluetooth (Sample Image) TOSHIBA Assist window – Connect tab ® Connectivity Doctor ®...
Page 141: Secure
Secure The features available in this category are: Supervisor password User password TOSHIBA Security Assist (Sample Image) TOSHIBA Assist window – Secure tab Utilities TOSHIBA Assist...
Page 142: Protect & Fix
Utilities TOSHIBA Assist Protect & Fix The features available in this category are: TOSHIBA PC Diagnostic Tool Utility TOSHIBA HDD Protection Utility (Sample Image) TOSHIBA Assist window – Protect & Fix tab...
Page 143: Optimize
The features available in this category are: Mouse Utility TOSHIBA Hardware Setup TOSHIBA Zooming Utility TOSHIBA Button Support CD/DVD Drive Acoustic Silencer TOSHIBA Accessibility TOSHIBA SD™ Memory Card Format Utility TOSHIBA Face Recognition (Sample Image) TOSHIBA Assist window – Optimize tab Utilities TOSHIBA Assist...
Page 144: Toshiba Application Installer
Utilities TOSHIBA Application Installer TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: Click Start, All Programs, Toshiba, Recovery, and then TOSHIBA Application Installer.
Page 145: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: An instant password—Secures your open programs and files when leaving the computer temporarily.
Page 146: Using A Supervisor Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.
Page 147: Using A User Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.
Page 148: Deleting A User Password
Utilities Setting passwords To register a password for the power-on password functions: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Password Utility. The TOSHIBA Password Utility window appears. (Sample Image) TOSHIBA Password Utility window Click Set. Enter your password, and then enter it again to verify.
Page 149: Toshiba Security Assist
TOSHIBA Security Assist The TOSHIBA Security Assist Utility acts as a “command center” where you can set up various passwords or other security features, and see how these features can be used with each other to increase security even further, or to simplify the ways that you protect your system.
Page 150 Utilities TOSHIBA Security Assist Log on Settings—Select this category to set up security options that protect individual user accounts. Password of current user: Check the status of the Windows currently logged on. Password of all users: Check the status of the Windows password for any additional Windows computer.
Page 151: Toshiba Pc Diagnostic Tool Utility
Refer to the online Help documentation within the application for additional help. NOTE The TOSHIBA PC Diagnostic Tool utility may show tests for features you do not have. This is normal and does not indicate a problem. To use the TOSHIBA PC Diagnostic Tool utility:...
Page 152: Toshiba Hdd Protection Utility
TOSHIBA HDD Protection Utility TOSHIBA HDD Protection Utility (Available on certain models) The TOSHIBA HDD Protection utility controls your computer’s hard disk drive (HDD) protection feature, which parks the HDD whenever motion is detected on the computer. Using this utility, you can enable or disable hard disk drive (HDD) protection, and set the motion detector’s sensitivity level for AC power and battery...
Page 153: Toshiba Sd™ Memory Card Format Utility
This utility is used to format SD Adapter slot. To format an SD memory card using this utility: Click Start, All Programs, Toshiba, Utilities, and then SD Memory Card Format. The TOSHIBA SD Memory Card Format screen appears. (Sample Image) TOSHIBA SD Memory Card Format screen Select the drive corresponding to the SD memory card.
Page 154: Toshiba Sd™ Memory Boot Utility
Be sure to back up your data to external media before performing this procedure as data on the drive may be lost. Click Start, All Programs, Toshiba, Utilities, and then SD Memory Card. The TOSHIBA SD Memory Boot Utility screen appears.
Page 155: Booting From A Bootable Sd Card
Power on the computer. During the boot process, press the The system displays the Boot menu. Use the arrow keys to select the SD/Floppy icon. Press the TOSHIBA SD™ Memory Boot Utility “TOSHIBA SD™ Memory for instructions). Enter key. Utilities...
Page 156: Mouse Utility
To access the Mouse utility: Click Start, Control Panel, and then Mouse under Hardware and Sound, or click the Mouse icon in the Optimize tab of TOSHIBA The Mouse Properties screen appears. (Sample Image) Mouse Properties screen The settings you can change are divided into these categories:...
Page 157: Toshiba Hardware Setup
Windows system. To access it: Click Start, All Programs, Toshiba, Utilities, and then HWSetup, or click the TOSHIBA Hardware Setup icon in the Optimize tab of The TOSHIBA Hardware Setup screen appears. (Sample Image) TOSHIBA Hardware Setup screen – General tab...
Page 158 Utilities TOSHIBA Hardware Setup CPU—Allows you to enable or disable CPU frequency switching modes Dynamically Switchable—This mode is the default setting for your computer, and automatically changes the processing frequency and decreases voltage depending on the power source: AC Power—If your computer is connected to the AC adaptor, the CPU frequency mode is set to high for faster processing.
Page 159: Usb Sleep And Charge Utility
“USB Sleep and Charge function.” It also displays the remaining battery capacity. Starting the USB Sleep and Charge Utility To start this utility click Start, All Programs, Toshiba, Utilities, and then USB Sleep and Charge. USB Sleep and Charge...
Page 160 Utilities USB Sleep and Charge Utility NOTE When “USB Sleep and Charge function” is set to Enabled, USB bus power (DC 5V) will be supplied to the compatible port even when the power of the computer is turned OFF. USB bus power (DC 5V) is similarly supplied to the external devices which are connected to the compatible ports.
Page 161: Enabling Usb Sleep And Charge
Enabling USB Sleep and Charge This utility can be used to enable or disable the “USB Sleep and Charge function” group. Check the check box for the group to enable the “USB Sleep and Charge function” for the USB port assigned to that group. In the default state, the group is disabled.
Page 162: Toshiba Zooming Utility
Adobe Acrobat Icons on the desktop To access the TOSHIBA Zooming Utility: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Zooming Utility. The TOSHIBA Zooming Utility Properties screen appears. (Sample Image) TOSHIBA Zooming Utility Properties screen Select the desired option(s).
Page 163: Toshiba Button Support
For more information about how to use the TOSHIBA Zooming Utility, right-click the click Help. TOSHIBA Button Support TOSHIBA Button Support allows you to customize the TOSHIBA Assist button. This button is located on the system control panel directly above the keyboard.
Page 164: Cd/Dvd Drive Acoustic Silencer
Click Silence Mode to make the drive run more slowly and quietly for listening to music or audio files on a CD. Click Normal Mode to run the drive at normal speed for transferring data. ® session. If you shut down, TOSHIBA Assist.
Page 165: Toshiba Accessibility
TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the press it once, release it, and then press a function key to activate the hot key function.
Page 166: Trusted Platform Module (Tpm)
Trusted Platform Module (TPM) NOTE This section only applies to systems with TPM. Your Toshiba computer includes the TPM (Trusted Platform Module), which is a security encryption device for your system’s internal storage drive. TPM is already included on your system, but needs to be installed and enabled using the following procedures.
Page 167: Fingerprint Authentication Utility
Toshiba does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Page 168: Care And Maintenance Of Your Fingerprint Reader
Utilities Fingerprint Authentication Utility The Fast User Switching feature of the Windows is also supported. If user A is logged on and the fingerprint utility verifies the fingerprint of user B (who is already enrolled), the utility recognizes the fingerprint and switches the users. If your system supports power-on security, existing fingerprint samples can be used also for power-on authentication.
Page 169: Fingerprint Reader Limitations
A warning message will be displayed when recognition is abnormal or recognition is not successful within a fixed duration. The recognition success rate may differ from user to user. Toshiba does not guarantee that this fingerprint recognition technology will be error-free. Fingerprint Authentication Utility Utilities...
Page 170: Configfree
Toshiba does not guarantee that the fingerprint reader will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 171: Configfree ® Utilities
Click Start, All Programs, Toshiba, and then ConfigFree. Double-click the ConfigFree icon Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. Click the ConfigFree icon then click the desired utility.
Page 172 Utilities ConfigFree® Status of Wireless Connection switch (Sample Image) Connectivity Doctor screen Profile Settings The Profile Settings utility lets you save network settings in “profiles.” ConfigFree network settings and devices. You can switch network settings simply by selecting the profile with the desired settings. If you visit a client company occasionally, for example, you can set up a profile to match that environment and connect to the network.
Page 173 To create a profile: Click the icon in the Notification Area. Move the pointer to Profile. Click Open Settings. The ConfigFree Profile Settings window appears. (Sample Image) ConfigFree Profile Settings window Click Add to start the Create Profile Wizard. Utilities ConfigFree®...
Page 174: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 175: Problems When You Turn On The Computer
Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 176 If Something Goes Wrong Problems when you turn on the computer If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the AC power light. If the indicator is glowing, the computer is connected to a live external power source.
Page 177 Try turning the computer on again. If the computer starts normally, the AC adaptor may be defective and will need to be replaced (see the Toshiba Web site at accessories.toshiba.com). If the AC power light starts flashing, remove the battery, and continue with the steps below.
Page 178: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows Verify that the AC adaptor is the correct unit for your computer model. The computer may not be able to start from an AC adaptor that is rated for less current (amperage) than the computer requires, even if the rated voltage is correct, and the plug fits correctly in the DC-IN socket.
Page 179: Internet Problems
The Windows Safe Mode with Command Prompt Enable Boot Logging Enable low-resolution video (640x480) Last Known Good Configuration (advanced) Directory Services Restore Mode Debugging Mode Disable automatic restart on system failure Disable Driver Signature Enforcement Start Windows When you highlight each option using the arrow keys, Windows displays information about each option at the bottom after Description.
Page 180: The Windows Operating System Can Help You
Click one of the options listed in the window and then follow the on-screen instructions. You can connect to Support Online by clicking Microsoft Customer Support or by going to Toshiba support at pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using Windows and Support to troubleshoot the problem first.
Page 181: Fixing A Problem With Device Manager
The device most recently connected to the system is the one most likely to be causing a conflict. Resolving conflicts There are several things you can do to resolve hardware conflicts: Get the most recent drivers from the manufacturer. Disable the device. For an older device, remove it from the computer.
Page 182: Memory Problems
If Something Goes Wrong Resolving a hardware conflict The Resources tab, which lists resources assigned to the monitor, optional external optical drive, optional external diskette drive, and other power-using functions. This tab does not appear if the device is not using resources. The Driver tab, which displays the drivers being used by the device.
Page 183: Power And The Batteries
Power and the batteries Your computer receives its power through the AC adaptor and power cord/cable or from the system batteries (battery, optional secondary battery, and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adaptor or power cord/cable will neither power the computer nor recharge the batteries.
Page 184: Keyboard Problems
After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see your accessories information included with your computer, or visit the Toshiba Web site at accessories.toshiba.com.
Page 185: Display Problems
Display problems Here are some typical display problems and their solutions: The screen is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing simultaneously.
Page 186 If Something Goes Wrong Resolving a hardware conflict The built-in screen flickers. Some flickering is a normal result of the way the screen produces colors. To reduce the amount of flickering, try using fewer colors. To change the number of colors displayed: Right-click in a blank area of the Windows Click Personalize, and then Display Settings.
Page 187: Disk Or Internal Storage Drive Problems
Disk or internal storage drive problems Problems with the internal storage drive or with a diskette drive usually show up as an inability to access the drive or as sector errors. Sometimes a drive problem may cause one or more files to appear to have garbage in them.
Page 188: Optical Drive Problems
If Something Goes Wrong Resolving a hardware conflict Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software. Consult your network administrator.
Page 189: Sound System Problems
For more information regarding supported optical media formats, refer to the complete detail specifications for your computer at pcsupport.toshiba.com. If the problem is with an optical data disc, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
Page 190: Expresscard ® Problems
If Something Goes Wrong Resolving a hardware conflict The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume control.
Page 191 Double-click the appropriate ExpressCard, which will be listed under one of the categories shown, for example: Disk drives, Network adapters, Other, etc. The operating system displays your ExpressCard’s Properties dialog box, which contains information about your ExpressCard configuration and status. The computer stops working (hangs) when you insert an ®...
Page 192: Printer Problems
If Something Goes Wrong Resolving a hardware conflict Refer to the card’s documentation, which should contain a troubleshooting section. Printer problems This section lists some of the most common printer problems. The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line).
Page 193: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi the device list in Device Manager (part of the Windows Panel, Hardware and Sound). Some Toshiba models may have a Wireless antenna ON/OFF switch even though they do not have an...
Page 194 If Something Goes Wrong Resolving a hardware conflict Verify that the network connection is configured to obtain its Internet Protocol (IP) address dynamically: Click Start, and then Network. Click View Status. Click Details. Verify that the DHCP Enabled setting is set to Yes. Click Close.
Page 195: Dvd Operating Problems
“Checking device properties” on page 181 on using Device Manager to view the optical drive properties. Check the Toshiba Web site for new information on optical drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 196: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Select Never on When to turn off the display. Click Save changes. The screen saver runs while you are watching a movie or title. If the screen saver is enabled, it runs on top of any movie or title you are watching.
Page 197: Data And System Configuration Backup In The Windows
Read the user’s guides. It is very difficult to provide a fail-safe set of steps you can follow every time you experience a problem with the computer. Your ability to solve problems will improve as you learn about how the computer and its software work together.
Page 198 If Something Goes Wrong Develop good computing habits In the input field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.” Then click Create. The Windows automatically stamps it with the current date and time, and displays a message that the restore point was successfully created.
Page 199 An external hard drive is recommended in case the internal hard drive fails. No additional software is required. Most of the optical drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from optical discs.
Page 200 If Something Goes Wrong Develop good computing habits then be able to easily restore the Windows the state it was in prior to the installation, undoing any changes that the installation process introduced. Back up your critical data (see entire computer with the Windows® operating system” on page 198).
Page 201 Cannot use the “USB Sleep and Charge function.” The setting of “USB Sleep and Charge function” may be Disabled. Change the setting to Enabled. Some external devices may not be able to use the “USB Sleep and Charge function”. In this case, please try one or more of the following methods.
Page 202: If You Need Further Assistance
Go to the Tech Support Center, select your particular model from the list and go to the Detailed Specifications for that model. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware- related, Toshiba offers a variety of resources to help you.
Page 203: Other Toshiba Internet Web Sites
Information about what you were doing when the problem occurred Exact error messages and when they occurred For technical support, call the Toshiba Customer Support Center: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
Page 204 Henares Spain United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. Germany Toshiba Europe GmbH Leibnizstraße 2 D-93055 Regensburg Germany Japan Toshiba Corporation, PCO-IO...
Page 205: Appendix A: Hot Keys/Toshiba Cards
Appendix A Hot Keys/TOSHIBA Cards Hot keys and TOSHIBA Cards provide a quick way to modify selected system functions and to launch applications. There are two types of TOSHIBA Cards: Hot Key Cards and Application Cards. Hot Key Cards The Hot Key Cards are used to set or modify the following system...
Page 206: Using The Hot Key Cards
To use the Hot Key Cards: Press and hold the The TOSHIBA Cards appear along the top of the screen. (Sample Image) Hot Key Card display Double-click the Card for the system function to be modified.
Page 207: Application Cards
TOSHIBA Zooming utility For more information, refer to Zooming Utility” on page Disc Creator utility This Application Card launches the TOSHIBA Disc Creator utility. TOSHIBA Hardware Setup utility For more information, refer to Hardware Setup” on page TOSHIBA Button Support utility For more information, refer to Support”...
Page 208: Using The Application Cards
Using the Application Cards To launch an application using the Application Cards: Press and hold the The TOSHIBA Cards display at the top of the screen. (Sample Image) TOSHIBA Card display Click the “stacked” card on the far right of the display. The Application Cards are hidden under this card.
Page 209: Card Case
The Card Case feature allows you to choose which cards appear in the Application Card display (see page 208). To use the Card Case: Click Start, All Programs, Toshiba, Utilities, and then Settings for Flash Cards. (Sample Image) Enabling and Disabling Application Cards Click the Open cards case button.
Page 210: Optical Disk Drive
Hot Keys/TOSHIBA Cards Hot key functions Optical disk drive This TOSHIBA Card or hot key Powers on/Powers off the optical disk drive on your computer. When ODD is Powered on, the optical disc drive tray can be opened by selecting eject. The optical disc drive tray must be closed manually.
Page 211: Volume Mute
Volume Mute This TOSHIBA Card or hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones. Selecting this Card or pressing the hot key displays the following options:...
Page 212: Lock (Instant Security)
Hot Keys/TOSHIBA Cards Hot key functions Lock (Instant security) This TOSHIBA Card or hot key blanks the display. Selecting this Card or pressing the hot key displays the following options: (Sample Image) Security options hot key function activates instant security. The user...
Page 213: Power Plan
Hot Keys/TOSHIBA Cards Hot key functions Power plan This TOSHIBA Card or hot key displays the power plans and cycles through the power plans. The properties of each power plan, and the power plans that are displayed by this function, are set in the Power Options window.
Page 214: Sleep Mode
Hot Keys/TOSHIBA Cards Hot key functions Sleep mode This TOSHIBA Card or hot key places the computer into Sleep mode. For more information about Sleep mode, please see and configuring Sleep mode” on page Selecting this Card or pressing the hot key displays the...
Page 215: Hibernation Mode
Hibernation mode This TOSHIBA Card or hot key places the computer into Hibernation mode. If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see “Using and configuring Hibernation mode” on page Selecting this Card or pressing the hot key displays the...
Page 216: Output (Display Switch)
Hot Keys/TOSHIBA Cards Hot key functions Output (Display switch) This TOSHIBA Card or hot key cycles through the power- on display options (only the first option is available when you do not have an external monitor attached) (the last option is available only if you are in Extended Display Mode).
Page 217: Display Brightness
To swap sides, select Swap Image Display. Display brightness This TOSHIBA Card decreases or increases the screen brightness. This hot key decreases the screen brightness. This hot key increases the screen brightness.
Page 218: Disabling Or Enabling Wireless Devices
Hot Keys/TOSHIBA Cards Hot key functions Disabling or enabling wireless devices This TOSHIBA Card or hot key enables/disables the optional wireless devices installed in your computer. The wireless modes are: Selecting this Card or pressing the hot key displays the...
Page 219: Disabling Or Enabling The Touchpad
Disabling or enabling the TouchPad™ This TOSHIBA Card or hot key enables/disables the TouchPad. For more information on using the TouchPad, see “Disabling or enabling the TouchPad™” on page Selecting this Card or pressing the hot key displays the following options:...
Page 220: Zoom (Display Resolution)
Hot Keys/TOSHIBA Cards Hot key functions Zoom (Display resolution) This TOSHIBA Card or hot key switches screen resolution. Selecting this Card or pressing the hot key displays the following options: [Space bar] (Sample Image) Screen resolution options Cycle through the screen resolutions, then select the desired...
Page 221: Keyboard Hot Key Functions
This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off. This hot key turns the TOSHIBA Zooming Utility to zoom-out. This hot key turns the TOSHIBA Zooming Utility to zoom-in.
Page 222: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your computer ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 223: Appendix C: Toshiba Pc Health Monitor
This information is used to identify and provide a notification of system conditions that may affect the performance of your Toshiba computer. It may also be used to help diagnose problems should the computer require service by Toshiba or Toshiba's authorized service providers.
Page 224: Enabling The Toshiba Pc Health Monitor
Toshiba's obligations under its standard limited warranty in any way. Toshiba's standard limited warranty terms and limitations apply. Enabling the TOSHIBA PC Health Monitor To enable the TOSHIBA PC Health Monitor, do one of the following: Click Start, All Programs, TOSHIBA, Utilities, and then PC Health Monitor.
Page 225: If A Toshiba Pc Health Monitor Message Is Displayed
We strongly recommend you have your computer checked by a Toshiba Authorized Service Provider. If you must use the computer for a short period of time before taking it to the Toshiba Authorized Service Provider, we recommend that you change the cooling method setting.
Page 226: Cleaning The Cooling Module
TOSHIBA PC Health Monitor Enabling the TOSHIBA PC Health Monitor Cleaning the cooling module The following information is dependent on if access to the cooling module is available. Access is available on certain models only. NOTE If you use the computer for a long period, the inside of the computer may become hot.
Page 227 Enabling the TOSHIBA PC Health Monitor Clean the cooling module using a small vacuum designed for computers, or other cleaning tool. (Sample Illustration) Cooling module Do not use a ballpoint pen or cotton swab for cleaning. It may clog NOTE the cooling module.
Page 228: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 DIMM alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 229 disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission gigabyte hard disk drive HTML Hypertext Markup Language IEEE...
Page 230 Glossary SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 231 baud rate — The speed at which a communication device, such as a printer or modem, transmits information. Baud rate is the number of signal changes per second (not necessarily the same as bits per second). See also bits per second. BIOS (basic input/output system) —...
Page 232 Glossary central processing unit (CPU) — The chip that functions as the “brain” of the computer. It takes information from outside sources, such as memory or keyboard input, processes the information, and sends the results to another device that uses the information. character —...
Page 233 default — The setting selected by a program when the user does not specify an alternative setting. device — A component attached to the computer. Devices may be external (outside the computer’s case) or internal (inside the computer’s case). Printers, disk drives, and modems are examples of devices.
Page 234 Glossary double-click — To press and release the pointing device’s primary button rapidly twice without moving the pointing device. In the Windows button, unless otherwise stated. double-density diskette — A 3.5-inch diskette that can hold up to 720 KB of information (half the capacity of a high-density diskette). See also diskette, high-density diskette.
Page 235 file — A collection of related information, saved on disk with a unique name. A file may be a program, information used by a program, or a document. See also document. file allocation table (FAT) — The section of a storage drive that keeps track of the location of stored files.
Page 236 Glossary Hibernation — A feature of many Toshiba computers that saves to the internal storage drive the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 237 liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it.
Page 238 Glossary network — A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail. non-interlaced — A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen.
Page 239 Plug and Play — Generally, refers to the computer’s ability to automatically configure itself to work with peripheral devices. When capitalized, refers to a standard that, when followed by a device manufacturer, allows a computer to configure itself automatically to work with the device. pointing device —...
Page 240 Glossary RJ11 — A modular connector used on most U.S. telephone systems and direct-connect modems. The RJ11 connector is a 6-wire connector. ROM (read-only memory) — Non-volatile memory that can be read but not written to. Non-volatile here means that information in ROM remains whether or not the computer is receiving power.
Page 241 TFT display — See active-matrix display. universal serial bus (USB) — USB is a serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). USB can connect up to 127 peripheral devices through a single all- purpose USB port.
Page 242: Index
183 notifications 113 power plan 213 power plan hot key 116 real-time clock (RTC) 108 removing 117 BIOS Setup see TOSHIBA Hardware Setup button power 52 start 126 CD, using 100 character keys 91 charging the battery 49...
Page 243 non-system disk or disk error message 177 not accessing disk drives 176 running on battery power 107 setting up 44 warning resume failure message computer lock 87 computing tips 89 ConfigFree® 170 connecting to a power source 47 connection set up 128 control buttons 71 Ctrl keys 92 desktop...
Page 244 Index mouse 73 external diskette drive connecting 75 external display, adjusting 73 FAT (File Allocation Table) 187 file extensions 98 file, backing up 90 files backing up 99 printing 98 restoring 99 saving 96 fingerprint authentication 167 fingerprint Authentication Utility using 167 Fn keys 92 function keys 92...
Page 245 lock computer, using 87 main battery removing 117 memory adding 52 problem solving 182 removing memory module slot cover 55 memory module inserting 55 installation 53 removing 59 memory module slot 55 microphone 131 monitor 72 connecting 72 not working 185 mouse installing 73 mouse utility 156...
Page 246 186 checking device properties 181 computer hangs when ExpressCard® inserted 191 computer will not power up 175 contacting Toshiba 202 corrupted/damaged data files 188 Device Manager 181 disk drive is slow 187 display is blank 185 ExpressCard® 190...
Page 247 S-video 72 Taskbar 126 television adjusting display 73 Toshiba registering computer 46 worldwide offices 203 TOSHIBA Assist 139 TOSHIBA Hardware Setup 157 Toshiba online resources 105 traveling tips 123 troubleshooting DVD player general problems 195 external keyboard 184 keyboard 184...

This manual is also suitable for:

R600-s4202 R600-sp2801a R600-sp2801c R600-sp2801r Portege r600-sp2801 Portege r600-st520w ... Show all

Toshiba R600-S4201 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys/Toshiba Cards

Appendix B: Power Cord/Cable Connectors

Appendix C: TOSHIBA PC Health Monitor

Quick Links

Related Manuals for Toshiba R600-S4201

Summary of Contents for Toshiba R600-S4201